May 13th, 2013, 02:37 PM | #1 |
ninjette.org member
Name: Scott
Location: the district
Join Date: Apr 2013 Motorcycle(s): 2008 EX250J8F Posts: 40
|
New fairings needed for a 2008 250, any advice?
Hey guys, I purchased a 2008 250, and the plastic is shredded. Any advice as to where to shop for a new set? There are several online places with kits for around $300, but I'm wondering about fit and quality. Any advice would be appreciated!
|
|
May 13th, 2013, 03:15 PM | #3 |
ninjette.org guru
Name: Danny
Location: San Francisco, CA
Join Date: Dec 2012 Motorcycle(s): 2008 Ninja 250R Posts: 263
|
How bad are they? Id try to repair them first.
|
|
May 13th, 2013, 04:01 PM | #4 |
ninjette.org guru
Name: Ben
Location: R'lyeh
Join Date: May 2011 Motorcycle(s): 2006 GSXR 750; 1983 CB750SC Posts: 277
|
I have heard (and seen) good things about Bliss-Star-Express on ebay. I saw them in person fitted on a bike and they were quite flawless. The paint looked very good and the fit was pretty much perfect. There was a small gap where the fairing meets the matte black plastic thing under the front end (above the front wheel), but it wasn't noticeable unless you were told about it and you are lying on the ground looking up. Plus I think a slight bend in the front fairing stay probably caused that gap, since it was in a front end collision.
|
|
May 13th, 2013, 08:13 PM | #5 | |
ninjette.org member
Name: Scott
Location: the district
Join Date: Apr 2013 Motorcycle(s): 2008 EX250J8F Posts: 40
|
Beyond repair, unfortunately.
Quote:
|
|
|
May 13th, 2013, 08:21 PM | #6 |
ninjette.org member
Name: Ben
Location: st.pete florida
Join Date: May 2013 Motorcycle(s): 2005 ninja 250, 2008 zx10, 2003 r6, 2008 187cc drag bike. Posts: 26
Blog Entries: 2
|
I went streetfighter for my front end, cost about 20 bucks for the headlight assembly and windscreen combo
|
|
May 13th, 2013, 08:53 PM | #7 |
ninjette.org certified postwhore
Name: Murphey
Location: Eastern Washington
Join Date: Apr 2011 Motorcycle(s): 2002 Honda 919, 2004 Ninja 500R NAKED Posts: A lot.
|
www.extremefairings.com has good reviews and are good quality of chinese kits. They are also affiliated with/a sponsor of cbrforum.com which is why I recommend them and will be going for them. I believe kits for the 250 are $550 shipped
|
|
May 14th, 2013, 03:18 AM | #8 |
ninjette.org sage
Name: Peanut
Location: Senoia, GA
Join Date: Feb 2011 Motorcycle(s): Green 2013 ZX-6R Posts: 723
|
Sharkskinzracingbodies.com make it a race bike.
__________________________________________________
http://www.simplysurrealphotography....es/peanut2.png |
|
May 15th, 2013, 03:48 PM | #9 | |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
Quote:
From my experience the fit was pretty damn close, close enough that I didnt have to modify anything. The paint quality is okay at best, it looks good but I feel like its not the thickest of paint, time will tell on that part. They did a good job matching my design actually, you just have to be very detailed of exactly what you want. I did notice a few scratches on the fairings when they came in (small ones) and one spot where they messed up the matte (on the tail -_-) and one spot where the clear coat ran but its on part of the fairing that wont be seen (unless the bike is flipped over ) As for actually dealing with the Chinese ****ers.... Good luck getting them on time by there estimated date, (mine where 10 days late) and good luck trying to talk them without them running you around the bush and blatant lies (They told me they would send me "gifts" (who the **** knows what that means) with my order because of all the shipping days, however, I didnt receive any gifts) I'm dealing with paypal right now to get a partial refund
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! |
|
|
May 16th, 2013, 06:49 AM | #10 |
ninjette.org member
Name: Scott
Location: the district
Join Date: Apr 2013 Motorcycle(s): 2008 EX250J8F Posts: 40
|
Wow, that looks GREAT. How complicated was the design process? Did they understand what you wanted with little difficulty? Which company did you use?
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Advice Needed About Getting Back Into Riding. | Brad Turner | General Motorcycling Discussion | 25 | February 6th, 2013 08:42 PM |
Advice needed for basic mods | CalvinAmI | 2008 - 2012 Ninja 250R Tech Talk | 4 | May 17th, 2012 11:21 AM |
Predicament: Advice Needed. | Mako | General Motorcycling Discussion | 34 | May 6th, 2011 08:39 AM |
Some Cornering Advice Needed | patw | Videos | 3 | April 16th, 2010 08:20 AM |
Advice Needed: Pizza on the Ninja? | Ramen | General Motorcycling Discussion | 44 | November 4th, 2009 12:11 PM |
|
|