View Single Post
Old January 13th, 2016, 07:51 AM   #2
jkv45
Rev Limiter
 
jkv45's Avatar
 
Name: Jay
Location: WI
Join Date: Jul 2013

Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes

Posts: A lot.
MOTM - Jun '18, Oct '16
Quote:
Originally Posted by blewbot View Post
Made this short video to show how easily the Oil can be changed on the 08-12 ninja - easily saves $50-75 that the dealer or a shop would collect and it only takes start to finish 10 minutes.

https://youtu.be/kSEl2Kra_cA
The oil level is not correct.

Just adding oil up to the upper line in the sightglass after replacing the filter does not give you the proper level.

After initial filling, you need to start the engine and let it run at least enough to fill the oil filter and circulate the oil, then wait (usually 3 minutes), then balance the cycle level (more accurate than using a rear or centerstand), then read the sightglass.

http://faq.ninja250.org/wiki/How_do_I_check_my_oil%3F
jkv45 is offline   Reply With Quote