Quote:
Originally Posted by Bob KellyIII
and I do like that vacuum hose arrangement better in your picture because the stock way gives very little vacuum to the petcock I noticed that when I put the in line filter on
it would only flow gas too the filter when at max vacuum ! like revving it up and then closing the throttle THEN gas would flow.... not perfect by any means. but it did work.
|
That's not working properly and is reason you don't have any petrol in your carb bowls. Verify if petcock still operates this way when you get carbs re-installed. If it does, problem is with petcock not flowing properly. It should flow abundantly at idle, no revving/closing throttle needed to make it flow. May need to measure actual vacuum levels in those hoses.