August 21st, 2010, 06:49 AM
|
#29
|
|
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010
Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F
Posts: A lot.
|
Quote:
Originally Posted by wyckedflesh
It has been reported that some of the smaller magnetic tank bags that have a smooth rubber bottom are doing a great job of blocking the venting at the cap on a variety of carbed bikes. (Sportrider,Motorcyclist,Cycle World, not sure which in the tech question section, issues are at work so I don't have them here.)
I also had a problem when I did the carb work of pinching one of the vacuum lines from the carb to the pump/fuel tap. This reduced the amount of vacuum to work the diaphram enough that it would run out of enough fuel in the float bowls to keep the bike running.
|
I don't have a tank bag yet and I'll make it a point to check my vacuum lines.
__________________________________________________
09 250R SE: Paying it forward one post at a time! 
 Don't forget to add yourself to our Member Map
|
|
|