ninjette.org - View Single Post - DIY - Yet Another, Another Hardlocking Saddlebag Mount

NathanF · September 3rd, 2011, 11:24 PM

OK, I bit the bullet and remounted the whole thing with 65mm bolts and newly cut aluminum spacers. (An exciting way to spend a Saturday night.)

There is now about a half inch between the top of the exhaust and the bottom of the case. I'm having a hard time imagining that will be sufficient to fix this problem though.

September 3rd, 2011, 11:24 PM	#20
NathanF ninjette.org member Name: Nathan Location: Portland, Oregon Join Date: Apr 2011 Motorcycle(s): 2009 V-Strom 650 ABS Posts: 166	OK, I bit the bullet and remounted the whole thing with 65mm bolts and newly cut aluminum spacers. (An exciting way to spend a Saturday night.) There is now about a half inch between the top of the exhaust and the bottom of the case. I'm having a hard time imagining that will be sufficient to fix this problem though.