ninjette.org - View Single Post

Jiggles · November 17th, 2011, 08:58 PM

If the rubber handle is resting on the plastic housing of the starter/killswitch, it could be causing enough friction to prevent the throttle from springing back.

Taking the bar end off isn't to hard. You just need to torch the bolt and find a large screw driving that fits well. With the bolt torched it comes off without too much effort.

November 17th, 2011, 08:58 PM	#2
Jiggles Jigglin' your Jiglets Name: Sean Location: San Jose, Ca Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much. Blog Entries: 1 MOTM - Apr '13	If the rubber handle is resting on the plastic housing of the starter/killswitch, it could be causing enough friction to prevent the throttle from springing back. Taking the bar end off isn't to hard. You just need to torch the bolt and find a large screw driving that fits well. With the bolt torched it comes off without too much effort. __________________________________________________ If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs