ninjette.org - View Single Post

EthioKnight · August 2nd, 2012, 05:28 PM

Well...if you're changing the chain (you should be able to get the type/length etc by searching on the forum) you'll definitely need to get new sprockets. As to brake pads, get the EBC HH sintered ones, they're great (about $40) and much better than OEM ones. As to rotor wear, I recently had to replace mine (because it had been warped), but I've heard that they last a long time...one thing to do would be to use a micrometer to measure the width of the rotors and compare that with the width of a new one, that ought to tell you if you need to change 'em or not. Good luck bud.

August 2nd, 2012, 05:28 PM	#3
EthioKnight Super Noob Name: Alex Location: Mobile, AL Join Date: Oct 2011 Motorcycle(s): '09 Kawasaki Ninja 250R, '84 Honda Spree 50cc Posts: A lot.	Well...if you're changing the chain (you should be able to get the type/length etc by searching on the forum) you'll definitely need to get new sprockets. As to brake pads, get the EBC HH sintered ones, they're great (about $40) and much better than OEM ones. As to rotor wear, I recently had to replace mine (because it had been warped), but I've heard that they last a long time...one thing to do would be to use a micrometer to measure the width of the rotors and compare that with the width of a new one, that ought to tell you if you need to change 'em or not. Good luck bud. __________________________________________________ My Videos