Quote:
Originally Posted by nadroj
So a quick update.
The 05-08 zzr600 lowers the newgen ex250 about 1.5 in. Forgot to take a measurement prior to swapping the dogbones so if someone could take a measurement that would help, but my guestemation is 1.5in lower.
You do not have to drill anything or use different bolts, just take the oem ones out and put the zzr600 dogbones in.
|
Thanks for the info. You might be best doing the measuring the same.... someone may be measuring the bike in a different way than you are.
I normally will measure the bike on a rear stand and measure from the floor to say the passenger peg bracket at some point and then lower it and do it again.
Just so you know your self how much of a drop it really is.... tire size can also throw the measurements off if someone does it a different way.... keep the variables to a minimum!
