ninjette.org - View Single Post - DIY- Front Fork Preload Spacers

kkim · October 4th, 2010, 02:07 PM

be very careful if you have the bike lifted from under the engine and get the front end off the ground and then press down on the front. It may pivot on the jack under the engine and become unstable.

October 4th, 2010, 02:07 PM	#10
kkim Join Date: Nov 2008 Posts: Too much.	be very careful if you have the bike lifted from under the engine and get the front end off the ground and then press down on the front. It may pivot on the jack under the engine and become unstable.