Quote:
Originally Posted by Advincula
Hey, sorry to revive a thread, but I was using the instructions here, and used a D.I.D. x ring chain with 51 plates plus the master link, and it's way too short. As a matter of fact, I think it would've been really tight anyways. My sprocket sizes are 14 in the front, and 45 in the rear. Can you tell me what I'm doing wrong? Any help would be appreciated!
|
oh craps.
It should be 52 + master since it's a total of 106 links. Not sure why I typed 51 plus master since that's only 104 links. You'll need to get another master to make it work if you have already cut it down to 51 links and add another link.