Quote:
Originally Posted by cuong-nutz
oh craps.  It should be 52 + master since it's a total of 106 links. Not sure why I typed 51 plus master since that's only 104 links. You'll need to get another master to make it work if you have already cut it down to 51 links and add another link. |
Quote:
Originally Posted by Alex
Bad Cuong!  |
It's okay
No worries! I did already cut down the chain, but here's the thing: I added the clip link to the end to give it back the lost link (104 links, not including master), but even then at 106 links (added master), the chain is still too tight to fit over the sprockets. There's no play at all in the chain if I were to force the master link to connect the chain ends.
Does anyone have any advice? The rear wheel is pushed all the way forward, I'm using JT front and rear sprockets at 14/45, and the chain is brand new.
I ordered a new chain just in case... with 108 links just to be sure.