ninjette.org - View Single Post

kkim · April 24th, 2010, 06:03 PM

nah, you can leave the washers in to test for the proper main. at WOT, the needles should be raised sufficiently in the needle jet so that the tapered portion of the needles are no longer in play.

April 24th, 2010, 06:03 PM	#10
kkim Join Date: Nov 2008 Posts: Too much.	nah, you can leave the washers in to test for the proper main. at WOT, the needles should be raised sufficiently in the needle jet so that the tapered portion of the needles are no longer in play.