ninjette.org - View Single Post - DIY- Clean and Adjust Chain

Army Aviator · February 28th, 2009, 10:21 PM

+1

I go for a 15-20 minute ride and then I use WD-40 and a chain brush to clean the chain. Then I wipe off the WD-40 with shop towels and use some compressed air to blow off any remaining excess. Next I use a heat gun from my soldering bench to warm the chain and then I apply Maxima Chain Wax.

February 28th, 2009, 10:21 PM	#19
Army Aviator ninjette.org member Name: Nate Location: Alabama Join Date: Dec 2008 Motorcycle(s): Ninja 250R Posts: 28	+1 I go for a 15-20 minute ride and then I use WD-40 and a chain brush to clean the chain. Then I wipe off the WD-40 with shop towels and use some compressed air to blow off any remaining excess. Next I use a heat gun from my soldering bench to warm the chain and then I apply Maxima Chain Wax.