Quote:
Originally Posted by chugs
I installed mines with no modifications at all, snaps back with ease. Have u tried reinstalling the original tube?
|
Yes I reinstalled original tube and it works as it should.
I just tried removing the secondary return cable from the R6 tube and it operates perfectly and snaps back as it should. So the problem is definitely the return cable.
In the attached pictures you can see how the cables are adjusted at the carb and how I have the return cable routed on the throttle tube. I have it wrapping around the OD of the tube, then into the routing path in the switch housing (routed behind the main throttle cable).
When I give it very partial throttle I can hear a slight clicking inside but can't track that down...
For a race bike any real danger to just removing the return cable?