March 2nd, 2012, 03:51 PM | #1 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
My Blue 2009 Build
Well I'v decided to start modifying my ninjette. My first order of business was the DIY fender chop.
When I first bought the bike the previous owner had just chopped it off below the plate. January 06, 2012 by Benji Reynolds, on Flickr Ninja 250r by Benji Reynolds, on Flickr Ninja 250r by Benji Reynolds, on Flickr I thought this was kind of ugly so I found an OEM fender off ebay for $20 and put that on. January 31, 2012 - 01.jpg by Benji Reynolds, on Flickr Then I got to thinking and finished the job and just chopped the whole thing off. DIY Fender Eliminator by Benji Reynolds, on Flickr DIY Fender Eliminator by Benji Reynolds, on Flickr DIY Fender Eliminator by Benji Reynolds, on Flickr My next project will be adding an Area P 12" stainless exhaust and the K&N pod filter. I'v already ordered them, just waiting on delivery. In the future I'd like to add a double bubble, woodcraft clipons, rear sets, honda cbr250r rear tire hugger, and maybe a 15t sprocket. |
|
March 2nd, 2012, 04:29 PM | #2 |
Super Noob
Name: Alex
Location: Mobile, AL
Join Date: Oct 2011 Motorcycle(s): '09 Kawasaki Ninja 250R, '84 Honda Spree 50cc Posts: A lot.
|
Great job bruh, bike looks great. I also have the semi-chopped fender and will be going 'full' as soon as I receive my integrated tail lights. Your license plate is a bit too vertical for my liking though...I'm looking into ways of bending the brackets for when I do mine. Keep @ it!
|
|
March 2nd, 2012, 04:43 PM | #3 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
It's too vertical for my liking as well. I tried bending the 79 cent brackets I got from Ace but they are pretty tough. I'll probably bend them next time I'm over at my parents place. My dad probably has something that will do the job.
|
|
March 2nd, 2012, 04:49 PM | #4 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
Sounds like you've got some solid plans you're going to love the Area P, that bitch is loudddd though!
|
|
March 5th, 2012, 02:17 PM | #5 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
Pod filter came in today, exhaust should be here wednesday.
K&N Pod Filter R-0990 by Benji Reynolds, on Flickr |
|
March 7th, 2012, 04:24 PM | #6 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
Got some more toys today.
Breather by Benji Reynolds, on Flickr Stainless 12" by Benji Reynolds, on Flickr |
|
March 8th, 2012, 06:22 AM | #7 |
Perpetual Newb
Name: Jason
Location: Imperial, MO
Join Date: Mar 2011 Motorcycle(s): 2010 MIB Ninja 250R [sold]; 2006 CBR600RR [sold]; 2013 Triumph Street Triple R Posts: 782
|
Where's your light for the rear plate? Do you just not ride around at night?
|
|
March 8th, 2012, 07:48 AM | #8 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
I'll be adding some bolt lights eventually. But as it is I don't really ride at night right now. The temperature is still dropping into the high 20s low 30s at night.
|
|
March 8th, 2012, 08:00 AM | #9 |
ninjette.org guru
Name: Chris
Location: Newnan, G.A.
Join Date: Jan 2012 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 347
|
Woah man, this bike is looking sick, cant wait to see it with that Area P on it!
|
|
March 8th, 2012, 08:59 AM | #10 |
ninjette.org sage
Name: David
Location: Loves Park, IL
Join Date: Feb 2011 Motorcycle(s): Time will tell Posts: 969
|
Just an FYI, the running light does provide some (read: barely) light for the plate. I had run mine without a plate light for a few months and it was never an issue here. I conjured up some plate lights though, for safety sake.
|
|
March 8th, 2012, 09:03 AM | #11 |
ninjette.org newbie
Name: Dustin
Location: East Coast
Join Date: May 2011 Motorcycle(s): Kawasaki Ninja 250R Posts: 1
|
Nice shots of the bike, Nikon user myself. Can't wait to see how the pipe looks on!
|
|
March 10th, 2012, 06:57 PM | #12 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
Ugh, went to put the pipe on today and the headers don't fit onto the motor. The holes are off by a degree or so. I struggled with it for over an hour and finally gave up for fear of stripping the bolts and not being able to get the stock headers back on.
|
|
March 10th, 2012, 07:19 PM | #13 |
on flames
Name: Max
Location: Montreal, Canada
Join Date: Dec 2011 Motorcycle(s): Ninja 250R Posts: 88
|
awesome pictures! slr ftw
__________________________________________________
2010 Ebony Black 250R |
|
March 14th, 2012, 06:18 PM | #14 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
Ha, thanks! My positive came undone from my battery while riding the other day, I had to stop and fix it. It's a good thing we have tools under the rear seat.
Battery Repair by Benji Reynolds, on Flickr |
|
March 15th, 2012, 08:38 AM | #15 |
ninjette.org member
Name: Zander the Expander
Location: Houston, Texas
Join Date: Nov 2011 Motorcycle(s): 2010 Kawasaki 250 (Track scooter) 2012 Triumph Daytona 675 Posts: 153
|
you should buy my fender eliminator kit ... check it out
|
|
March 15th, 2012, 09:32 AM | #16 |
Intrepid Adventurer
Name: Josh
Location: Rochester/Buffalo NY
Join Date: Jan 2012 Motorcycle(s): 2004 GSXR 750 , 71 cb350streettracker, 07 Polaris Predator 500 Posts: A lot.
|
Nice bike. Photos are great ! What camera are you using ?
|
|
March 15th, 2012, 11:57 AM | #17 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
A combination of my Nikon D7000, J1, and iPhone 4.
|
|
March 15th, 2012, 05:18 PM | #18 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
Some photos of myself wasting time putting the K&N into my bike, as I put the air box back in. I didn't want to remove the kleen air yet until I get the exhaust on. On the good side it only took me 4 hours to do.
March 12, 2012 - 01.jpg by Benji Reynolds, on Flickr March 12, 2012 - 02.jpg by Benji Reynolds, on Flickr March 12, 2012 - 03.jpg by Benji Reynolds, on Flickr |
|
March 16th, 2012, 12:06 AM | #19 |
Blue Shell magnet
Name: Nolan
Location: Northwest Washington
Join Date: Aug 2011 Motorcycle(s): 1997 Ninja 250 Posts: 816
|
Lookin good! Now lets see the AP on it
|
|
March 21st, 2012, 03:37 PM | #20 |
ninjette.org guru
Name: Kevin
Location: central Illinois
Join Date: Apr 2011 Motorcycle(s): 2011 Green 250R Posts: 346
|
What's the status Benji, you get the Area-P back yet?
|
|
March 21st, 2012, 04:08 PM | #21 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
Just got installed yesterday, the replacement went on so much easier. I still need to jet the bike though. I'm getting a ZG double bubble tomorrow. I was gonna go shoot a couple of photos after I put that on.
|
|
March 22nd, 2012, 05:34 PM | #22 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
Put the DB on today... it's great the wind protection is so much better than stock. The only problem, my bottom right well nut broke. So I only have three bolts holding the windscreen on for now.
|
|
March 24th, 2012, 11:09 AM | #23 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
|
|
April 18th, 2012, 07:09 PM | #24 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
|
|
April 18th, 2012, 08:13 PM | #25 |
ninjette.org certified postwhore
Name: Sean
Location: Middle TN
Join Date: Apr 2012 Motorcycle(s): 2010 Ninja 250r (sold) / '03 CBR 600RR Posts: A lot.
|
Did you ever get some bolt lights for your plate? I got some blue LEDs at this auto parts store (had a cigarette lighter plug) but I cute the wires & spliced them into where the stock ones went...doesn't provide as much light as I'd like but it's neat :P
|
|
April 19th, 2012, 07:45 AM | #26 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
Most laws requiring plate lights also specify specifically that the must be white. |
|
|
April 19th, 2012, 08:37 AM | #27 |
ninjette.org certified postwhore
Name: Sean
Location: Middle TN
Join Date: Apr 2012 Motorcycle(s): 2010 Ninja 250r (sold) / '03 CBR 600RR Posts: A lot.
|
|
|
April 19th, 2012, 05:55 PM | #28 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
|
|
April 19th, 2012, 06:10 PM | #29 | |
ninjette.org certified postwhore
Name: Sean
Location: Middle TN
Join Date: Apr 2012 Motorcycle(s): 2010 Ninja 250r (sold) / '03 CBR 600RR Posts: A lot.
|
Quote:
Anyways, I have led (white) plate bolts on the way just in case. |
|
|
April 20th, 2012, 09:01 PM | #30 | |
hates stupid people
Name: Mark
Location: Oklahoma City
Join Date: Aug 2011 Motorcycle(s): 2005 ZX6R Posts: 860
|
Quote:
Too many mods, not enough attention to maintenance?
__________________________________________________
My vlogging channel: Ma1iciousLogic |
|
|
April 21st, 2012, 10:47 AM | #31 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
I attempted to install the jet kit myself, but as it turns out I wasn't up to the task. After installing it the bike wouldn't start, so I cut my loses and had it towed to the shop.
|
|
April 21st, 2012, 12:22 PM | #32 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
Jelly about your exhaust. Looks fantastic!
|
|
April 21st, 2012, 06:55 PM | #33 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
Thanks! I took a gamble on the stainless but I think it actually looks better than the fake carbon one.
|
|
April 24th, 2012, 05:45 PM | #34 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
Should have named this thread "Photos of my Ninjette"
Here's another, Ninjette by Benji Reynolds, on Flickr |
|
April 26th, 2012, 03:56 PM | #35 |
on flames
Name: Max
Location: Montreal, Canada
Join Date: Dec 2011 Motorcycle(s): Ninja 250R Posts: 88
|
very nice!
__________________________________________________
2010 Ebony Black 250R |
|
June 15th, 2012, 12:28 PM | #36 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
|
|
April 21st, 2013, 11:58 AM | #37 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
|
|
June 18th, 2014, 04:19 AM | #38 |
ninjette.org sage
Name: Benji
Location: Wadsworth, IL
Join Date: Aug 2011 Motorcycle(s): 2009 Ninja 250r (Sold), 2009 FZ6, 2015 Honda Grom Posts: 898
|
Figured I would repost some of the broken flickr links.
January 06, 2012 by Benji Reynolds, on Flickr Ninja 250r by Benji Reynolds, on Flickr Ninja 250r by Benji Reynolds, on Flickr January 31, 2012 - 01.jpg by Benji Reynolds, on Flickr DIY Fender Eliminator by Benji Reynolds, on Flickr Area P & ZG Double Bubble by Benji Reynolds, on Flickr Ninjette by Benji Reynolds, on Flickr |
|
June 18th, 2014, 09:24 AM | #40 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2009 Race Build | MikeRoot | 2008 - 2012 Ninja 250R Tech Talk | 14 | June 29th, 2014 12:27 PM |
FS, 2009 blue 250r | maviam1 | Motorcycle-related | 3 | December 4th, 2012 11:15 AM |
feeler fs: 2009 blue 250 | snot | Motorcycle-related | 13 | December 1st, 2012 06:09 PM |
2009 SE Build | Betlog | Pictures | 8 | July 21st, 2010 09:59 PM |
2009 Ninja 250R Blue | diesel250r | Motorcycle-related | 2 | November 18th, 2009 05:33 AM |
|
|