FS '88-07 Ninja 250 | five bikes part-out | updated 040611

M · April 6th, 2011, 09:25 AM

I have some Ninja 250 parts that I'm selling. 98% of these parts are from 250's that are between '00-'06. A few parts are from a '96 model. All parts listed are compatible with '88'-07 (wiring harness, regulator will be different for '88-'93).

I've listed each part with a picture. My pricing is typically within the range of 15-25% of OEM. Prices do not include shipping, so let me know your destination. I'll gladly combine parts to save you money on shipping.

This list is not complete of all my parts, but is about 90%. I have an '06 with many parts that are duplicates of these listed below. I also have many internal engine parts both from an '00 engine and an '05 engine. Let me know if you have internal parts needs.

I do not 'hold' parts. First one to pay via PayPal gets the parts. This policy is due to many, many potential buyers who have me 'hold' a part while they spend the next ten days shopping for a better price.

If you are near Oklahoma, local pick up is available. Also, if you are buying more than $500 in parts at one time, I may deliver to you for a charge, if you are within 500 miles or so of Coweta, OK.

The donor bikes:

TDM Ohio · May 20th, 2011, 08:55 AM

PM sent.

Hemi4cs · May 20th, 2011, 04:50 PM

red upper? 22701

CZroe · May 20th, 2011, 05:54 PM

Wow. There's a Coweta, OK? I grew up in Coweta County, GA and never heard it used to reference anything else but the Indians it was named after.

I guess they moved west.

M · June 11th, 2011, 10:08 AM

Hi,

The red upper has sold. All PMs up to 061111 have been answered.

Donnyd21 · June 20th, 2011, 01:57 PM

I could use a good seat if you have one, left handlebar and left rear side cover rubber groumet that slides into the tank. I am in Oklahoma City. Whats wrong with the bikes in the 1st 2 pics? Pm me if you have those parts still

M · June 21st, 2011, 05:42 AM

I don't currently have a seat for sale. I do have a LT handlebar with about a 5* bend in it (see my pics in the original post). I do have the rubber tank bumpers.

The first two bikes each had blown engines (ran out of oil by the previous owners).

cerberusrex25 · June 23rd, 2011, 09:36 PM

If you guys have not bough something from this lot, or need a part, I suggest you get on this. M is an excellent seller and his stuff is in great condition.

cuong-nutz · June 27th, 2011, 01:46 AM

Do you have any more handle bars or a front left turn signal?

M · June 27th, 2011, 06:49 AM

I do have a LT front turn signal. The base isn't included. It would be $20 shipped within the CONUS.

cuong-nutz · June 29th, 2011, 05:28 PM

Do you have any stock levers? Needing both clutch and brake that aren't bent or broken. I'll take the turn signal with it as well if you have them.

M · July 9th, 2011, 06:15 AM

I have a front brake lever, that has a paint scratch on the ball end. The lever is straight.

It'd be $16 shipped for both.

cool_hand_luke_12 · July 9th, 2011, 08:56 AM

hey do you have a front fairing for a ex250?

M · July 10th, 2011, 11:50 AM

Hi,

All my upper and lower fairings have been sold.

03slime250 · July 11th, 2011, 09:43 PM

have a front master cylinder?

streetracer744 · July 15th, 2011, 10:53 PM

can i buy a set of rear pegs..I need both left and right pegs

M · July 20th, 2011, 07:35 PM

I'll check on both the front master cylinder and the rear pegs. It may be the weekend before I can check.

03slime250 · July 20th, 2011, 08:07 PM

Already found a mc, thanks tho

dirtyrottenninja · July 21st, 2011, 03:39 PM

i could use a 2 intake valves, 2 inener and 2 outer springs ,2keepers,2retainers ,etc, and a 4 rocker arms ,i also need the two side brackets (left and right ) for the chin fairing and bolts ,1 rubber bushing thing for the tank mount, , im in phoenix 85032 thanks steve

M · July 24th, 2011, 11:54 AM

Hi Steve,

I'll ship you an entire upper head with all the valves & springs, keepers, etc. for $50. You can pull the valves, etc. that you want. The rocker arms are $20 each ($80 for four). Can you give me parts numbers for the chin fairing/bolts as I can't picture them. The tank mount bushing would be $3. Shipping for everything would be $20.

xbox3bob · July 24th, 2011, 05:14 PM

hello, i need to buy a left fork, and a right turn signal how much woudl that be?

M · July 25th, 2011, 04:14 AM

Forks are sold only as a pair. They're $125 + shipping. I've sold all of my turn signals.

xbox3bob · July 25th, 2011, 02:46 PM

sounds good

ill take the forks. and can we exchange information?

xbox3bob · July 25th, 2011, 03:26 PM

or ur paypal info so i can give u the money

A7xschecter6661 · July 28th, 2011, 07:11 AM

Since some of the fairings are broken would you be willing to sell a few of the bolts/grommets for the fairings and side panels if you have any left? Idea on a price if so?

M · July 28th, 2011, 09:59 AM

Quote:

Originally Posted by 'xbob3bob"

or ur paypal info so i can give u the money

Payment received, I'll let you know when the parts have been shipped via FedEx.

M · July 28th, 2011, 10:01 AM

Quote:

Originally Posted by A7xschecter6661

Since some of the fairings are broken would you be willing to sell a few of the bolts/grommets for the fairings and side panels if you have any left? Idea on a price if so?

Which bolts/grommets do you need?

A7xschecter6661 · August 2nd, 2011, 09:24 PM

Quote:

Originally Posted by M

Which bolts/grommets do you need?

Just the bolts and grommets around the bottom fairing and the 4 side grommets for the back of the side panels (2 each side)

M · August 12th, 2011, 10:22 AM

Quote:

Originally Posted by A7xschecter6661

Just the bolts and grommets around the bottom fairing and the 4 side grommets for the back of the side panels (2 each side)

Sorry, I do not have those.

choneofakind · August 14th, 2011, 12:03 PM

You still have the petcock? if so, does it leak at all? mine leaks on the "on" position.

M · August 14th, 2011, 01:25 PM

I do have it, it'd be $35 shipped within CONUS. It doesn't leak. The internal filter at the top is a bit cracked, but it doesn't impede the petcock use.

modemagic · August 22nd, 2011, 05:30 PM

Do you have a brake pedal? What about a stock exhaust in good shape? (No major scraps/dents)

Palero · August 22nd, 2011, 05:57 PM

Upper fairing stay available?

M · August 24th, 2011, 08:33 PM

No upper fairing stays left, sorry!

choneofakind · September 7th, 2011, 05:25 PM

Quote:

Originally Posted by M

I do have it, it'd be $35 shipped within CONUS. It doesn't leak. The internal filter at the top is a bit cracked, but it doesn't impede the petcock use.

I'm still interested. I can't order it at the moment. I have fall break in a few weeks. If you still have it then, I'll order it. If it's sold, then it's my loss.

M · September 20th, 2011, 06:33 AM

I still have the petcock. Feel free to PM me or e-mail me. Shipping would be $7 within CONUS.

03slime250 · October 7th, 2011, 09:49 PM

Clutch lever and perch?

Major_Paine · May 15th, 2012, 12:39 AM

footpeg, L front & stay (http://www.hickmans.us/ninja250/2000/022809_039.jpg) | $25

do you still have this part?

drdriftking007 · May 18th, 2012, 03:18 PM

Do you have a fairing stay bracket? Would pick up

also do you left and right turn signals? and another seat?

Major_Paine · May 18th, 2012, 07:33 PM

i hope you still check this thread..

April 6th, 2011, 09:25 AM	#1
M ninjette.org member Name: M Location: Oklahoma Join Date: Jun 2009 Motorcycle(s): Ninja 250 x2, Ninja 650R Posts: 165	FS '88-07 Ninja 250 \| five bikes part-out \| updated 040611 I have some Ninja 250 parts that I'm selling. 98% of these parts are from 250's that are between '00-'06. A few parts are from a '96 model. All parts listed are compatible with '88'-07 (wiring harness, regulator will be different for '88-'93). I've listed each part with a picture. My pricing is typically within the range of 15-25% of OEM. Prices do not include shipping, so let me know your destination. I'll gladly combine parts to save you money on shipping. This list is not complete of all my parts, but is about 90%. I have an '06 with many parts that are duplicates of these listed below. I also have many internal engine parts both from an '00 engine and an '05 engine. Let me know if you have internal parts needs. I do not 'hold' parts. First one to pay via PayPal gets the parts. This policy is due to many, many potential buyers who have me 'hold' a part while they spend the next ten days shopping for a better price. If you are near Oklahoma, local pick up is available. Also, if you are buying more than $500 in parts at one time, I may deliver to you for a charge, if you are within 500 miles or so of Coweta, OK. The donor bikes: 250 parts: air filter bracket \| $3 air filter bracket \| $3 air filter bracket \| $3 air filter case assembly \| $20 air filter case assembly \| $20 air filter case assembly \| $20 air filter strap \| SOLD axle, front \| $10 battery tray \| $8 - SOLD battery wire leads & 30A starter switch \| $15 brake caliper assembly, front \| $35 brake caliper assembly, rear \| $30 brake caliper assembly, rear \| $30 brake line, rear assembly \| $20 brake line, front w/ bracket \| $10 brake, front hose clamp \| $3 brake, rear hose \| $8 brake pedal, rear & master cyclinder / brake line \| $30 brake master assembly, front \| $40 - SOLD brake master assembly, front w/ caliper \|70 brake master assembly, rear \| $10 brake reservoir, front \| $25 brake switch \| $5 carb. boots \| $10 carbs. 2005 in very good condition \| $125 - SOLD carbs, 2006 in excellent condition \| $150 cargo clips, four \| $15 cargo clips, three \| $10 center stand \| $35 - SOLD center stand \| $35 - SOLD cable, clutch \| $7 cable, clutch \| $7 cable, speedometer \| $7 - SOLD cable, speedometer \| $7 cable, speedometer \| $7 cable, starter \| $7 cable, throttle opening \| $7 cable, throttle closing \| $7 chain cover \| $12 chain cover \| $12 chain cover \| $12 chain guard \| $7 controls, left \| $30 - SOLD controls, left \| $30 - SOLD controls, left w/ clutch cable \| $30 controls, right \| $30 - SOLD controls, right \| $30 controls, right harness \| $20 picture two cowling, lower \| $65 - SOLD picture two picture three cowling, lower bracket \| $3 cowling, lower bracket \| $5 cowling, lower bracket \| $5 engine bolts \| $6 engine mounts, L & R \| $30 exhaust, Cobra F1r \| $150 - SOLD engine parts, internal \| enquire exhaust, w/ scratches, no leaks \| $35 exhaust headers \| $25 exhaust stay, L \| $12.50 - SOLD exhaust stay, R \| $12.50 fender, front \| $40 - SOLD fender, rear FR \| $15 fender, rear FR \| $15 fender, rear w/ turn signals & reflectors \| $40 footpeg, L front & stay \| $25 footpeg, L & stay w/ shifter assembly \| SOLD footpeg, L rear \| $10 footpeg, R front & stay w/ brake pedal & master cylinder \| $35 foot peg, R front & stay w/ brake pedal & master cylinder \| $35 footpeg, R rear \| $10 footpeg, right R \| $10 fork holder, lower w/ bearings \| $40 fork, upper \| $25 forks, L & R \| $125 fuel tank dampers \| $5 fuse / junction box \| $20 fuse / junction box \| $20 picture two gear lever assembly \| $10 gear lever assembly \| $15 handle bar, left (approx. 5* bend in the bar) \| $10 - SOLD handle bar, left w/ riser (approx. 3* bend in the bar) \| $35 - SOLD handle bar, left w/ riser \| $35 - SOLD handle bar, right w/ riser \| $35 - SOLD handle bar, right W/ throttle sleeve \| $25 - SOLD handle bar, right w/ throttle sleeve \| $25 - SOLD harness, main \| $25 harness, main \| $25 harness, main \| $25 - SOLD harness, main \| $25 - SOLD headlight \| $45 - SOLD headlight \| $45 - SOLD horn \| $8 horn \| $10 horn & bracket \| $13 horn & bracket \| $13 igniter \| $45 igniter \| $45 ignition coils & caps \| $35 instrument cluster \| $125 - SOLD instrument cluster w/ replacement cover, 1 broken tab \| $65 picture two picture three instrument cluster wiring harness \| $12 lock set, complete w/ two keys \| $100 - SOLD petcock \| $25 radiator & fan \| $110 - SOLD radiator & fan \| $125 - SOLD picture two radiator & fan \| $125 picture two radiator & fan \| $125 picture two radiator reservoir \| $7 radiator reservoir & hoses \| $10 radiator reservoir & hoses \| $10 radiator cap assembly \| $10 radiator cap assembly \| $15 radiator cap assembly \| $15 radiator cap assembly \| $25 - SOLD regulator, voltage \| $25 regulator, voltage \| $25 rear grip \| $20 rear grip \| $20 reflectors \| $5 each rocker arms \| $20 each seat, minor tears \| $25 - SOLD seat \| $60 - SOLD seat front latch \| $5 shock \| $35 shock \| $35 shock \| $35 - SOLD side stand w/ switch \| $25 signal covers \| $5 speedometer \| $40 speedometer gear \| $15 speedometer gear \| $15 speedometer gear \| $15 speedometer gear & cable \| $22 sprocket cover \| $25 sprocket cover \| $25 starter switch & leads \| $25 picture two swingarm \| $60 swingarm \| $60 - SOLD swingarm caps \| $5 tachometer \| $30 tail cover & rear grip \| $30 picture two picture three tail cover \| $20 picture two picture thre tail lamp \| $45 tank / seat bracket \| $5 temperature gauge \| $13 thermostat & sensor \| $20 thermostat & sensor \| $25 thermostat & sensor \| $25 thermostat & sensor \| $25 throttle sleeve \| $5 tool tray \| $5 tool tray \| $5 turn signal relay \| $10 turn signal relay \| $10 uni trak arm \| $20 uni trak tie rods \| $25 uni trak tie rods \| $25 uni trak, tie rods & arm \| $45 wind screen \| $25 - SOLD wind screen \| $35 - SOLD __________________________________________________ The Rally - Oklahoma

May 20th, 2011, 04:50 PM	#3
Hemi4cs ninjette.org newbie Name: Carrie Location: Culpeper Va Join Date: Feb 2011 Motorcycle(s): Ninja 250 and a YZF 600R Posts: 7	red upper? 22701 __________________________________________________ The kids are finally old enough I can start riding again!

June 11th, 2011, 10:08 AM	#5
M ninjette.org member Name: M Location: Oklahoma Join Date: Jun 2009 Motorcycle(s): Ninja 250 x2, Ninja 650R Posts: 165	Hi, The red upper has sold. All PMs up to 061111 have been answered. __________________________________________________ The Rally - Oklahoma

June 21st, 2011, 05:42 AM	#7
M ninjette.org member Name: M Location: Oklahoma Join Date: Jun 2009 Motorcycle(s): Ninja 250 x2, Ninja 650R Posts: 165	I don't currently have a seat for sale. I do have a LT handlebar with about a 5* bend in it (see my pics in the original post). I do have the rubber tank bumpers. The first two bikes each had blown engines (ran out of oil by the previous owners). __________________________________________________ The Rally - Oklahoma

June 27th, 2011, 01:46 AM	#9
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	Do you have any more handle bars or a front left turn signal? __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

May 20th, 2011, 08:55 AM	#2
TDM Ohio ninjette.org newbie Name: Greg Location: Dayton, Ohio Join Date: May 2011 Motorcycle(s): 1972 T150 Trident, 1981 CB125S, 1992 TDM-850, 2002 VTX-600, 2003 Ninja 250, 1986 KX-80 Posts: 3	PM sent.

May 20th, 2011, 05:54 PM	#4
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Wow. There's a Coweta, OK? I grew up in Coweta County, GA and never heard it used to reference anything else but the Indians it was named after. I guess they moved west.

June 20th, 2011, 01:57 PM	#6
Donnyd21 ninjette.org member Name: Donny Location: Oklahoma City Join Date: Jun 2011 Motorcycle(s): 2008 250R Posts: 36	I could use a good seat if you have one, left handlebar and left rear side cover rubber groumet that slides into the tank. I am in Oklahoma City. Whats wrong with the bikes in the 1st 2 pics? Pm me if you have those parts still

June 23rd, 2011, 09:36 PM	#8
cerberusrex25 Accesories Guru Name: Dave Location: Centreville, VA Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537	If you guys have not bough something from this lot, or need a part, I suggest you get on this. M is an excellent seller and his stuff is in great condition.

June 27th, 2011, 06:49 AM	#10
M ninjette.org member Name: M Location: Oklahoma Join Date: Jun 2009 Motorcycle(s): Ninja 250 x2, Ninja 650R Posts: 165	I do have a LT front turn signal. The base isn't included. It would be $20 shipped within the CONUS. __________________________________________________ The Rally - Oklahoma

June 29th, 2011, 05:28 PM	#11
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	Do you have any stock levers? Needing both clutch and brake that aren't bent or broken. I'll take the turn signal with it as well if you have them. __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

July 9th, 2011, 06:15 AM	#12
M ninjette.org member Name: M Location: Oklahoma Join Date: Jun 2009 Motorcycle(s): Ninja 250 x2, Ninja 650R Posts: 165	I have a front brake lever, that has a paint scratch on the ball end. The lever is straight. It'd be $16 shipped for both. __________________________________________________ The Rally - Oklahoma

July 9th, 2011, 08:56 AM	#13
cool_hand_luke_12 ninjette.org newbie Name: Luke Location: Chicago Join Date: Jul 2011 Motorcycle(s): 1998 Kawasaki Ninja Ex250 Posts: 9	hey do you have a front fairing for a ex250?

July 10th, 2011, 11:50 AM	#14
M ninjette.org member Name: M Location: Oklahoma Join Date: Jun 2009 Motorcycle(s): Ninja 250 x2, Ninja 650R Posts: 165	Hi, All my upper and lower fairings have been sold. __________________________________________________ The Rally - Oklahoma

July 11th, 2011, 09:43 PM	#15
03slime250 ninjette.org member Name: dakota Location: northwest arkansas Join Date: May 2010 Motorcycle(s): 2003 ninja 250 Posts: 61	have a front master cylinder?

July 15th, 2011, 10:53 PM	#16
streetracer744 Ninja ZX-5R Name: Dino Location: AUburn Join Date: Oct 2010 Motorcycle(s): Ninja Posts: 53	can i buy a set of rear pegs..I need both left and right pegs __________________________________________________ 2002 Ninja 500r....Mod friendly

July 20th, 2011, 07:35 PM	#17
M ninjette.org member Name: M Location: Oklahoma Join Date: Jun 2009 Motorcycle(s): Ninja 250 x2, Ninja 650R Posts: 165	I'll check on both the front master cylinder and the rear pegs. It may be the weekend before I can check. __________________________________________________ The Rally - Oklahoma

July 20th, 2011, 08:07 PM	#18
03slime250 ninjette.org member Name: dakota Location: northwest arkansas Join Date: May 2010 Motorcycle(s): 2003 ninja 250 Posts: 61	Already found a mc, thanks tho

July 21st, 2011, 03:39 PM	#19
dirtyrottenninja ninjette.org member Name: steve o Location: phoenix Join Date: Jun 2011 Motorcycle(s): ninja 250 Posts: 22	i need some parts please i could use a 2 intake valves, 2 inener and 2 outer springs ,2keepers,2retainers ,etc, and a 4 rocker arms ,i also need the two side brackets (left and right ) for the chin fairing and bolts ,1 rubber bushing thing for the tank mount, , im in phoenix 85032 thanks steve

July 24th, 2011, 11:54 AM	#20
M ninjette.org member Name: M Location: Oklahoma Join Date: Jun 2009 Motorcycle(s): Ninja 250 x2, Ninja 650R Posts: 165	Hi Steve, I'll ship you an entire upper head with all the valves & springs, keepers, etc. for $50. You can pull the valves, etc. that you want. The rocker arms are $20 each ($80 for four). Can you give me parts numbers for the chin fairing/bolts as I can't picture them. The tank mount bushing would be $3. Shipping for everything would be $20. __________________________________________________ The Rally - Oklahoma

July 24th, 2011, 05:14 PM	#21
xbox3bob ninjette.org newbie Name: Bob Location: White Join Date: Jul 2011 Motorcycle(s): EX250F Posts: 5	hello, i need to buy a left fork, and a right turn signal how much woudl that be?

July 25th, 2011, 04:14 AM	#22
M ninjette.org member Name: M Location: Oklahoma Join Date: Jun 2009 Motorcycle(s): Ninja 250 x2, Ninja 650R Posts: 165	Forks are sold only as a pair. They're $125 + shipping. I've sold all of my turn signals. __________________________________________________ The Rally - Oklahoma

July 25th, 2011, 02:46 PM	#23
xbox3bob ninjette.org newbie Name: Bob Location: White Join Date: Jul 2011 Motorcycle(s): EX250F Posts: 5	Forks sounds good ill take the forks. and can we exchange information?

July 25th, 2011, 03:26 PM	#24
xbox3bob ninjette.org newbie Name: Bob Location: White Join Date: Jul 2011 Motorcycle(s): EX250F Posts: 5	or ur paypal info so i can give u the money

July 28th, 2011, 07:11 AM	#25
A7xschecter6661 ....................... Name: Peter Location: New York Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113	Since some of the fairings are broken would you be willing to sell a few of the bolts/grommets for the fairings and side panels if you have any left? Idea on a price if so?

August 14th, 2011, 12:03 PM	#30
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	You still have the petcock? if so, does it leak at all? mine leaks on the "on" position.

August 14th, 2011, 01:25 PM	#31
M ninjette.org member Name: M Location: Oklahoma Join Date: Jun 2009 Motorcycle(s): Ninja 250 x2, Ninja 650R Posts: 165	I do have it, it'd be $35 shipped within CONUS. It doesn't leak. The internal filter at the top is a bit cracked, but it doesn't impede the petcock use. __________________________________________________ The Rally - Oklahoma

August 22nd, 2011, 05:30 PM	#32
modemagic ninjette.org member Name: Dave Location: Davenport, IA Join Date: Jul 2011 Motorcycle(s): 2000 Ninja 250 Posts: 14	Do you have a brake pedal? What about a stock exhaust in good shape? (No major scraps/dents)

August 22nd, 2011, 05:57 PM	#33
Palero ninjette.org member Name: Mike Location: Los Angeles, California Join Date: Aug 2011 Motorcycle(s): 1988 Honda Hawk GT 1989 EX250F (Died from left-turning car) 2011 EX250J (Died from SAME left-turning car) Posts: 51	Upper fairing stay available?

August 24th, 2011, 08:33 PM	#34
M ninjette.org member Name: M Location: Oklahoma Join Date: Jun 2009 Motorcycle(s): Ninja 250 x2, Ninja 650R Posts: 165	No upper fairing stays left, sorry! __________________________________________________ The Rally - Oklahoma

September 20th, 2011, 06:33 AM	#36
M ninjette.org member Name: M Location: Oklahoma Join Date: Jun 2009 Motorcycle(s): Ninja 250 x2, Ninja 650R Posts: 165	I still have the petcock. Feel free to PM me or e-mail me. Shipping would be $7 within CONUS. __________________________________________________ The Rally - Oklahoma

October 7th, 2011, 09:49 PM	#37
03slime250 ninjette.org member Name: dakota Location: northwest arkansas Join Date: May 2010 Motorcycle(s): 2003 ninja 250 Posts: 61	Clutch lever and perch?

May 15th, 2012, 12:39 AM	#38
Major_Paine ninjette.org member Name: Ernie Location: LA area Join Date: Sep 2011 Motorcycle(s): 2004 ninja 250 (in progress), 2009 cbr600rr Posts: 122	footpeg, L front & stay (http://www.hickmans.us/ninja250/2000/022809_039.jpg) \| $25 do you still have this part?

May 18th, 2012, 03:18 PM	#39
drdriftking007 Drdriftking007 Name: Eddie Location: Houston Texas Join Date: Apr 2012 Motorcycle(s): 2007 Ninja 250 Posts: 67	Please Do you have a fairing stay bracket? Would pick up also do you left and right turn signals? and another seat?

May 18th, 2012, 07:33 PM	#40
Major_Paine ninjette.org member Name: Ernie Location: LA area Join Date: Sep 2011 Motorcycle(s): 2004 ninja 250 (in progress), 2009 cbr600rr Posts: 122	i hope you still check this thread..