- Perfectly Running Bike Stalls Out
- Someone say aftermarket ignitions don't work for these bikes?
- Jet kit help.
- Cam chain guide replacement help
- Horrible intermittent rattle has me rattled X $@!#
- Front brake...brakes on it's own...
- Tail Light
- Takes forever to warm up
- Swingarm Borked?
- No Crank
- No Crank, Electrical Problem
- SOL for slip-ons?
- Tyre bead / rim leak
- Engine Won't Get Gas
- Top speed two-way test
- Where is this spring from?
- Upper Fairing
- 07 ex250 fairings
- Looking for an upper fairing?
- valve adjuster locknut seized to adjuster
- Re Jet for 96 250r
- Pilot jets and idle mixture screws won't screw in
- Air box removal
- exhaust clamp loosened
- Carbs flooding cylinders
- Hesitation after rolling off throttle
- Coolant Leak from Head Pipe
- A little help please.
- Random out of the blue issue?
- Tire installation DIY?
- Trouble after top end work
- Oil Leak - Help
- GVEs - Worth it?
- Help with engine knocking.
- Engine Clicking/Clacking
- Engine Swap help
- Replacing Alternator Cover
- 07-250 Engine replacement
- Bent swing arm?
- chain not "free"
- new to me 89 and no key...where ?
- front blinker baseplate
- Service Manual Missing Page 4-8 Engine Top End
- Rebuilding 04 Ninja 250
- Radiator MOD
- Can you identify this part?
- Ebay Key Blanks any good
- Looking for a tire thread
- Breaking apart when loaded
- Fuel Not Flowing to Carb Bowls
- Pregen riding alongside a CBR250
- Jetting for cold weather
- Teafour's project 2004 Ninja 250
- Idle issues with Ecotrons EFI kit
- 08-12 gas tank on pregen
- What do I need to know to rebuild my engine?
- Gas Leak - Post fix
- Handlebar Height
- Turn Signal Issues
- Spark issue?
- 1997 Kawasaki EL250D CVK30 Carburetor Help
- Stuck Float? Or maybe?
- [FREE!] Kawasaki EL250 Service/Parts/Owners Manuals
- 07 250r Start Up Issues
- Winter is upgrade season.
- Ninja 250 Engine Seizure Symptoms?
- What size pilot jets are you guys running?
- Oil View Glass Doesnt Show any oil
- Looking for Definitive Short Answer to Carb Setup for K&N R-0990 Pod Conversion
- Engine gaskets
- Spoked wheels?
- Ninja dying at idle / dying when throttle / trouble starting
- Brake pads
- anyone up for local tutoring on carbs?
- local seat upholstery shop recommendation (94533-ish)
- New here & lookin to rebuild
- Where do you guys get parts?
- '07 250r header/exhaust
- 2005 kawi ninja 250r vacuum not sucking fuel from petcock
- 2006 250 ninja carb questions
- Where to route the coolant overflow tube?
- Air/fuel mixture screw o rings. How big of a deal are they?
- Think I may have put my front tire on wrong?
- 2006 ninja brake pad help
- Front tire question
- Fast flashers with incandescent bulbs, no leds?
- Fuel Leak - New One on Me - and Question for Ducatiman
- Junction Box Question
- New Bike to me - White smoke from Exhaust.
- Ninja 250 power loss at high RPM
- The classic issue - Bike wont start - Not the Kill switch
- Tires for a Trackday noob
- Flat spot in power curve between 6-7,000rpm
- Need exhaust help new rider here need help please please please
- Easy easy easy tail light/ turn signal led mod
- Lower Radiator hose
- Rebuilding/repacking Muzzy’s canister
- 2008-2012 ninja parts on pregen
- Front tire tread direction
- Moving rear tire forwards
- Interesting?
- Clutch issue
- Help with oil filter plate
- Refurbishing and upgrading my '05 fuel injection project...
- Paint code/touch-up paint for red wheels on '92 Ninja 250
- A different kind of tire question.....
- Pregen mods you've done?
- Back tire is leaning?
- Need help with bike!
- Replacing a valve stem
- Cam Chain - Is this one bad?
- Changing brake fluid
- '86 Rebuild: Where does this stuff go?
- Choke closes by itself (1986 ex250e)
- New engine
- Bottom triple clamp sits too high in frame.
- Strange long hang back to idle.
- Clutch engages but doesn’t disengage
- Side cover broken "tab"
- Ignition Coil outside of specs
- Oil and dust fork seal diameter and dimensions
- Trouble with oil pressure warning light/sensor
- Is this the “key code”?
- Had to leave the bike in a parking lot - Carb? Help?
- bike won't shift down to lower gears at stops
- Oil Change with Liqui Moly 10w40? any idea?
- Ex250f rebuild help
- Extra bolt with nyloc nut
- I wanted brighter turn signals
- Looking at getting a 250r tomorrow and had some questions
- Carbs blowing mixture out front
- Fuel Vent Hose Routing
- 2005 trying to get carbs off
- Carb work...forgot about the gas
- Bike Sat For Years
- Trouble Shooting - Bike Click Wont start
- GPS Speedo?
- [1987] Need help fixing Idle
- '06 Ninja EX250 - Carb/Engine questions...
- Starting ?
- Dirt Bike Handlebars Question
- Decent adjustable rearsets?
- Bike won't start - electrical mastermind needed
- Engine noise around 6grand and up?
- Air box to carbs
- 2005, chasing idle
- Where to buy stuff
- Galfer Kevlar brake pads
- Kawasaki zz250 body work
- Orginal Kawasaki paint code Nocturne Blue
- What fuel tanks retro fit well onto a 88-07?
- Warped head shaving
- Issue with left turn signal wiring on my 06 ninja 250
- Fork maintenance question
- YACC - Flat spot 5500 - 7000 after hard acceleration
- Stalled out at a stop, can't get it started or neutral
- Something Melting / Dripping onto Exhaust
- Engine work at 10,000 miles
- 06 250r bogs and dies
- Ninja 250 carb question
- How to on water pump replacement
- Erratic Idle, Been trying to fix for the last two weeks.
- right cyl cutting out above 4000
- New Gen Valve Float
- Exhaust Pipe Replacement
- Carburetor don't close by itself
- [1987] Pilot/Main jet for altitude
- Some fun stuff found in oil screen
- Where can I find pistons?
- Maintenance After 2,000 miles since '01
- New To Me 2007 Ninja 250
- 2003 - Handlebar options
- Wire going to coil - What is it?
- Acting like hydrolocked over night?
- 06 250r idle issues
- new-to-me 07 250r dying at idle
- Handle bar
- What’s my break in period for a new piston?
- Planning on trying a Tire swap....
- Please help - oil leak!
- Fire damaged 2006 Ninja 250
- slow return to idle - really could use some help
- Swapping EX500 cluster onto 250 bike.
- exhaust fabrication for 06 250r
- 2005 Ninja 250 Carburetor size
- 2007 Ninja 250 Rx2n replica wiring diagram
- 07 Carb shenanigans
- Bulb Size for Rear Pods?
- Troubleshooting a lean running Ninja
- Tire size question
- Stock 2-2 into 2-1?
- 90/80-16 Front Tire?
- Cafe Racer?
- Needing a mental refresh. Got another 250.
- porting the 250 head
- 06 250 carb hose routing
- 2007 Wrong Plugs
- 2007 250R Starting Trouble
- 90/80-16 vs 100/80-16
- 3 odd questions
- Bike dying while riding
- Cam chain tensioner lock screw lost
- Air filter box smells like gasoline
- 2007 Ninja 250 dies and wont start when warm
- My '06 250 ninja project - seeking knowledge and advice
- Should there be a hole in the airbox?
- Torque link nut
- Brake question
- Right-Hand Cylinder not firing
- Need help identifying 2 items
- rear suspension question
- Motor, front, and rear end swap project is getting serious.
- WTF is the problem now?
- Anyone with Long-term experience with LED headlight from Superbrightleds?
- Evap system relocation?
- Bike died, won't start
- 2006 Ninja 250 Engine ticking between 2k-4k RPM
- race harness / minimumized wiring
- Stock exhaust dimensions
- idle adjustment or air mixture
- Cable lengths, 500 vs 250?
- Carb frustration *argghh*
- First bike 07 250
- Stripped drain plug threads
- Bike loses revs/power with WOT at speed.
- Battery box bracket
- Don't know what this is?
- Thinking of buying a new seat?? Read this first!
- Noise with Clutch Out
- Winter rebuild time. With questions and updates.
- Battery Mount after Pod Filter Install
- Compression Numbers
- 08+ Clutch Swap Complete
- Carb Question
- Wider rear tire for a 2003 Ninja
- Center Stand Bending
- Petcock Rebuild?
- Ignition Resistor Model Year Debut
- Uneven header pipe temperatures
- Broken Tab Repair
- Cafe racer project- which other tank will fit?
- Air Box Mod
- New 250 owner Troubleshooting Questions
- '04 Tool kit box
- No Headlight '04
- Body Parts
- "Carbs from the Black Lagoon"
- NEED HELP!!!!! 07 ninja ex250 won’t start
- Missing Page In Service Manual
- Unknown wiring