Since we do not have permission to copy the actual rebuild procedure, the following links are to another website and illustrate rebuilding the CVK40 carburetor; however, this info also applies to the CVK30 installed on the Ninja 250. You will need to refer to other links in the DIY stickies (above) for removal of the carburetors, etc.

After going to the following link, you can click on each pic and enlarge same for more detail. Just ignore the references to the KLR650 bike. Of course, there is a lot more info available on this website that maybe of interest to all.

http://www.multisurfacemotorcycling.com/klrpage/carb/carb05.htm

Thanks for posting that. It's always nice to be able to see inside something you normally don't get to see. I know people who have never had a carb apart will find that most informative.

good find! :thumbup:

Is there an updated link for this page? I get a forbidden access error.
Thanks

Looks like that whole site just disappeared.

I knew I should have copied that website, when I found it!!! Looks like it is down.

Maybe you can find more info on "various" subjects here:

http://openpdf.com/ebook/keihin-carb-cvk-42-pdf.html

I found an Aprila service manual there!