|
View Full Version : New-gen OEM turn signals broilmebk June 11th, 2012, 12:08 PM I've got the OEM front and rear turn signals for 08+. Local pickup only. The wires are cut off the front signals from the proton flushmount install. I stripped the screws on the rear turn signals so i had to cut them out of the fender; their function is not hindered in any way This is no longer available krolinked June 20th, 2012, 11:47 PM Still Have the turn signals? broilmebk June 21st, 2012, 08:09 AM Yup Palero June 27th, 2012, 02:21 AM I've got the OEM front and rear turn signals for 08+. Local pickup only. The wires are cut off the front signals from the proton flushmount install. I stripped the screws on the rear turn signals so i had to cut them out of the fender; their function is not hindered in any way Pic of rear signal when it was installed with yoshi f/e https://sphotos.xx.fbcdn.net/hphotos-ash3/535838_10101594016544949_1731314882_n.jpg I can ride down to OC to pick them up-- I'm in Pasadena/SGV. (assuming you still have them!) broilmebk June 27th, 2012, 08:08 AM Still available. PM sent Palero |
|