View Full Version : Underlights


Coolbpf
August 2nd, 2012, 08:55 PM
Just put some amber underlights on the ninja. Pics up tomorrow! Anticipation anticipation :P

menikmati
August 2nd, 2012, 08:56 PM
Amba lamps.

choneofakind
August 3rd, 2012, 05:20 AM
Where's da amba lamps???
Posted via Mobile Device

Coolbpf
August 3rd, 2012, 08:29 PM
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/527302_379498782116707_51399028_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-snc7/s720x720/384680_379498888783363_261961799_n.jpg

7oxSin
August 3rd, 2012, 09:00 PM
how many lights and what amp fuse did you use? i finished my lights last night and 10 mins into my ride they blew a 10 amp fuse. i have 6 light bars with 48 leds per bar, so 288 leds total?

Coolbpf
August 3rd, 2012, 10:02 PM
The hell are you doing with 288 lights? This is 60 leds in little clusters of 10 (really cheap). Im not sure what amperage the fuse rates at because it came with the kit I ordered. It hasnt blown and i dont think it will. You probably look like something from the heavens with 288 lights on hah.

7oxSin
August 3rd, 2012, 10:31 PM
The hell are you doing with 288 lights? This is 60 leds in little clusters of 10 (really cheap). Im not sure what amperage the fuse rates at because it came with the kit I ordered. It hasnt blown and i dont think it will. You probably look like something from the heavens with 288 lights on hah.

i needed 6 bars to place them where i wanted, and i could get the 48 led bars for $2.15 each shipped so i went with them, i spent under 20$ doing the whole bike up with the wired fuse. i took some pics but they dont do it justice, when im on the street it lights up a lil more then one whole lane.

with a little light still on
http://desmond.imageshack.us/Himg152/scaled.php?server=152&filename=img2012080300448.jpg&res=landing

with 4 7ft fluorescent lights on
http://desmond.imageshack.us/Himg191/scaled.php?server=191&filename=img2012080300454.jpg&res=landing

and with all the lights off.
http://desmond.imageshack.us/Himg401/scaled.php?server=401&filename=img2012080400455.jpg&res=landing

i hate that my cam wont pick up all the light, it lights up my 2 car garage enough to see all 4 walls and walk around lol.

Duchess
August 4th, 2012, 10:15 AM
Gorgeous! Love the amber color of the lights. Which kit did you order?

Coolbpf
August 4th, 2012, 10:52 AM
Gorgeous! Love the amber color of the lights. Which kit did you order?

http://www.xkglow.com/60PC_Ultra_Bright_Motorcycle_LED_Engine_Neon_Kit_p/xk034001.htm


I THINK it was this one. I got it off of Amazon though (it's not really on sale it's always 39.99). It comes with everything you need, and can be setup and functioning with a few hours, depending on how indecisive you are with pod placement :P

I thought It was going to be cheap chinese make that may or may not work, but honestly everything that came with the kit was fairly good quality and they didn't skimp on materials. I definitely recommend it if you are looking for a cheap way to light your bike up.

edit: And the customer service guy was really helpful on some questions I had

93etgocart
August 4th, 2012, 11:30 AM
Glad you took my advice Tyler. That kit is really a great kit well worth the money and not to over the top bright. As for the guy with 288 leds you either have a bad ground or bought cheap Chinese crap and Japan doesn't like China so it is making your life miserable lol. But the fuse blowing that far into the ride is for sure a short I would check all your wiring. Did you solder like you know you should have?

Xer0-
August 21st, 2012, 04:05 PM
looks like mine, i used flex leds (http://www.alpena.ca/Product.aspx?id=1016)the work really well and can be cut to size.

http://www.ninjette.org/forums/picture.php?albumid=1029&pictureid=8356