Did a few 0-60 runs on my bone stock 250. It feels noticeably slower especially in the top end compared to my dead one. Unfortunately I accidentally deleted the second gopro save that had some more runs so were stuck with just this one. I'll do some more tomorrow, my fastest time on my old bike was 6.36 seconds, I'm not doing so well on this one :o

ZTM1JhW21Q8

Adjusted the shifter and took some more vids also 2 guys tried to kill me but my Jiglets are ever vigilant

hoLpy1Bs1lQ

The bike has a serious flat lining problem in the upper revs its like, where'd all the power go? Totally different beast compared to when my bike with the Area P can. And remember this bike is 100% stock, no jetting, no intake mods, absolutely nothing. I see now where they got those ****** ****** 0-60 times for the newgens. If I had perfect launches, maybe, MAYBE I could get up to 7.50 seconds

fail jiggs, vid unavailable..!

fail jiggs, vid unavailable..!

OMG BE PATIENT

:cool:

Obviously if you don't balance out the cup holder with a monster energy sticker you're going to see serious loss in power.

Obviously if you don't balance out the cup holder with a monster energy sticker you're going to see serious loss in power.

das a water bottle

did you put on some weight while you were healing up your leg?

:D

Do you not see the 6 pack in my avatar!?

Me neither

I got a name to represent!

wuDhxLZEqw0

Hah! I'm still faster!!! :) I gotta remember to post that video once I get back yo school
Posted via Mobile Device

you need a better launch and redline that bitch!!!

bro that launch was dog ****

Obviously the hulking water bottle is causing you some drag. Also try farting in first gear, it may give you a little extra push. :D

Helium in the tires!!!

LoneRonin, its faster to shift at like 12.5k or 13k. That puts you right in the power band in the next gear. Shifting at redline puts you on the way out of the power band in the next gear.
Posted via Mobile Device

bro that launch was dog ****

Hey it was the first time I tried it since I broke my leg so suck it!

And I really need to adjust the shifter it's in a totally different spot compared to the 1000 and it messes me up

Helium in the tires!!!

LoneRonin, its faster to shift at like 12.5k or 13k. That puts you right in the power band in the next gear. Shifting at redline puts you on the way out of the power band in the next gear.
Posted via Mobile Device

pregens have a weird power band and a crazy redline. the newgen redlines at 13

Hey it was the first time I tried it since I broke my leg so suck it!

And I really need to adjust the shifter it's in a totally different spot compared to the 1000 and it messes me up

dont worry. we can teach you the right way when you come down ;)

edit: wow reading that sounds sooo homo

:lol:

pregens have a weird power band and a crazy redline. the newgen redlines at 13

ohhhhhh right. I'm used to a 14k redline and the limiter not stepping in till 14.5... Sorry.
Posted via Mobile Device

Edit: weird? Just more top end and less midrange.

dont worry. we can teach you the right way when you come down ;)

edit: wow reading that sounds sooo homo

baahahahaha
Posted via Mobile Device

This is a clip from that same day. I've noticed that even through my favorite routes I'm going slower than I used to. I'm not sure if its because my confidence isn't back up to what it used to be or if I simply do not want to take the risk. I go a lot slower through blind curves and really don't even lean quite as much. Normally when what happened in the video would happen I'd take the same pace as the guy and meet up with them later.

Also, I know you can't hear it in the video but this guys pipe was super loud. I didn't hear him until he was right next to me and when I was able to hear him it was so loud and quick that it actually startled me and I jumped in my seat. Loud pipes don't save lives, they are just ****ing annoying

LWskFoxAORQ

Adjusted the shifter and took some more vids also 2 guys tried to kill me but my Jiglets are ever vigilant

hoLpy1Bs1lQ

The bike has a serious flat lining problem in the upper revs its like, where'd all the power go? Totally different beast compared to when my bike with the Area P can. And remember this bike is 100% stock, no jetting, no intake mods, absolutely nothing. I see now where they got those ****** ****** 0-60 times for the newgens. If I had perfect launches, maybe, MAYBE I could get up to 7.50 seconds

alex.s post a video of proper launchin please cause im scared to dump the clutch :\

i usually rev it to like 7k and let it out slow and once i feel the slightest movement i dump it but then my rpms go down to like 4k and basically would have been better off just doing a regular take off

at 7k even if you completely dropped it you wouldn't wheelie

was u doing wheelies?

I will now make it a mission to learn clutchless upshifts.

I've done it successfully a couple of times, but when I **** up, I reeeeeeeeally ****ed it up.

I will now make it a mission to learn clutchless upshifts.

I've done it successfully a couple of times, but when I **** up, I reeeeeeeeally ****ed it up.

Its not hard and you really cant **** up on a 250

wow im sure my 2fiddy is faster than that :eek:
and how come your bike is flat in the 10k ? i thought the 2fiddy starts to run after the 10k :eek: thats what i feel on my bike ..

and is your 1000 not flickable ?

im creating my 0 - 60 runs now, im not good with editing so im just gonna give you the raw footy and tell you at what times the runs start so you can work your magic and get the exact times

wow im sure my 2fiddy is faster than that :eek:
and how come your bike is flat in the 10k ? i thought the 2fiddy starts to run after the 10k :eek: thats what i feel on my bike ..

and is your 1000 not flickable ?

Is you 2fiddy 100% stock? If you look at a dyno for the bike at about 10.5k rpms is the peak and then the hp starts dropping. With a jet kit and exhaust it will pull hard up to 12.

And I can do that on the 1000 but it requires alot more effort, hence less flickable

Rev it as high as it goes at wot and use the clutch to modulate. Dropping the clutch will loop your bike if it's reved up at wot

C1CU9wjK_Ms

here is what i did a couple days ago

WaSfrp6mB68

runs are at 0:00, 2:10, 3:13, 5:23, and 6:19

hopefully you guys can see the needle well enough to get an accurate time. I think 5:23 is the best run

What are you using to time yourself?

here is what i did a couple days ago

WaSfrp6mB68

runs are at 0:00, 2:10, 3:13, 5:23, and 6:19

hopefully you guys can see the needle well enough to get an accurate time. I think 5:23 is the best run

Trying to figure out where the hell you are. That looks like a good stretch of land for some test runs.

here is what i did a couple days ago

WaSfrp6mB68

runs are at 0:00, 2:10, 3:13, 5:23, and 6:19

hopefully you guys can see the needle well enough to get an accurate time. I think 5:23 is the best run

Here's how to time yourself. Open up windows movie maker and load the video. Use the frame by frame arrows to get to the point that your run starts and hit split to split the video. Then use the frame by frame arrows to get to the point where the needle hits 60 and hit split again. Mouse over the split video clip and it will tell you the length

Also what mods are on your bike?

Here's how not to launch the 250 as shown by our very own:

LhOxP48zjsM

It's not me btw.

ryan.chin its called high tech road off of route 100 in hanover

Jiggles all i have is a full yoshi system

Here's how not to launch the 250 as shown by our very own:

LhOxP48zjsM

http://i21.photobucket.com/albums/b276/seanvoight/578891.jpg

[MENTION=6341]Jiggles all i have is a full yoshi system

Jetkit?

Jetkit?

honestly i have no idea. the dealership i bought it from said the only mod was the exhaust.

You need to dig into those carbs and learn about your bike! And anyway I can't see the speedo in your video

Y U NO 1080!?

You need to dig into those carbs and learn about your bike! And anyway I can't see the speedo in your video

Y U NO 1080!?

carbs is a bit out of my league right now. just took the head light housing off today for the first time and installed my koso. well 60 is directly straight up.

and its only 1080 in the wider angle setting. cant see much with it when its on my helmet

You can see ALOT more in 1080, trust me

nahhhh ive tried it. it just stared at the gauges the whole time. couldnt see anything in front of me

which in the case of this thread would be acceptable. i shall try again tomorrow

:confused:

:madtyping:

at 7k even if you completely dropped it you wouldn't wheelie

I tried to launch today for first time. I just dumped clutch and front came up. So then I did my cool cultch control launch (a lil worse then urs :P) and I couldn't tell 0-60 time cuz the gauge was too bright on exposure :-/

Noob story ^

I tried to launch today for first time. I just dumped clutch and front came up. So then I did my cool cultch control launch (a lil worse then urs :P) and I couldn't tell 0-60 time cuz the gauge was too bright on exposure :-/

Noob story ^

The ones I recorded aren't even that good. I did a lot better on my old 250

cWecvpQrQoA

The ones I recorded aren't even that good. I did a lot better on my old 250

cWecvpQrQoA

yeah i believe you. i know that accident probably messed you up a bit. i would upload my first eh launch but seeing you cant even see when the needle hit 60 or that my launch was pretty crappy its pointless. ill try again when i get some time. :rolleyes:

Still gaining back confidence every day