http://www.rg-racing.com/images/products/large/img1639_1.jpg
Downpipe Grille for Kawasaki Ninja 300 and Ninja 250
Radiator Guards for Kawaski Ninja 250/300


http://www.rg-racing.com/images/products/large/img1637_1.jpghttp://www.rg-racing.com/images/products/large/img1638_1.jpg
Engine Case Covers


http://www.rg-racing.com/images/products/large/img1634_4.jpg
Kawasaki Ninja 300/Ninja 250 Crash Protectors


http://www.rg-racing.com/images/products/large/img1632.jpg
Tail Tidy for Kawasaki Ninja 300 ('12-)

See more....
http://www.rg-racing.com/browseBike/Kawasaki/Ninja_300/2013.aspx

Any chance the cases are the same for the 250.

Any chance the cases are the same for the 250.

The 250 doesn't need them.

ill take the screen if they make it for the ninja 250r

The 250 doesn't need them.

My rashed up, beat to hell clutch cover begs to differ :D

The sliders look similar to the shogun no-cut kit for the 08-12 250. It just seems the placement is too high to be useful.

http://www.rg-racing.com/images/products/large/img1634_8.jpg

It seems that none of the frame slider offerings bother to show their sliders actually help [i.e. show the bike resting on the sliders to prove clearance]. 9 pictures on their website and they're all pretty much the same shot. $215 in today's USD seems spendy for a apparently simple solution.

The clutch case on the F and J series have the same bolt pattern but different shape, so a Slingshot Racing carbon fiber cover will probably fit both. These R&G covers seem a lot more form-fitting (SSR uses stand-offs), so the bolt pattern probably isn't the only relevant detail.

Very interested to know if they fit the F or J series.