http://cgi.ebay.com/ebaymotors/HONDA-CBR-600-F4i-900-1000-RR-Flush-Mount-Turn-Signals_W0QQitemZ200319401263QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?ha sh=item200319401263&_trksid=p4506.c0.m245&_trkparms=72%3A1171%7C65%3A12%7C39%3A1%7C240%3A1318

my friend is thinking about getting them they fit the ninja?

They dont look very flush.

^ they are fine we saw dimensions n they are fine enough, dont they have to be 10w or something to work with our 250's? anyone know?

Currently Active Users Viewing This Thread: 3 (3 members and 0 guests)
ajaygraci, Cali619, kkim

kkim u got any advice?

nope. sorry... I like the stock indicators and have no intention of changing them, so I'm not knowledgeable at all with what would work or not work for what it is you want to do.


what you should be doing is using the search function and looking at threads having to do with sidemarkers, blinkers, indicators, etc. and see what others have done, then PM them when you find something you like.

Everything does not only exist out in the open on forums... there is a lot happening through email and PMs that most do not see.:)

yea i pmed a guy never got a response

you'll be surprised how many people never look at their PMs on a regular basis. :rolleyes:

give it time, they'll respond.

to throw in my :2cents:, I got some flushmount turn signals from ebay and they look similar to this. mine said that they were for the '08 Ninja 250 and so the wiring was all correct and what not. the only thing i would be worried about with these is that they are made for Honda and so the wiring might not fit exactly with our 250.

ninja007 , do you have those ones that are like inside of the hole of the turn signal, what was your keyword if you dont mind?

ninja007 , do you have those ones that are like inside of the hole of the turn signal, what was your keyword if you dont mind?

no, I don't have the ones that fit into the holes. IMO, they are too flush. my turn signals look like this. and this is the ebay auction. (http://cgi.ebay.com/ebaymotors/88-08-Kawasaki-Ninja-EX-250-CARBON-AERO-TURN-SIGNALS_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q 3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem270358 389044QQitemZ270358389044QQptZMotorcyclesQ5fPartsQ5fAccessories) I did a search under "ninja 250 turn signals" and these popped up among others. I like 'em. Some people think they are not flush enough. but i figure they have to stick out some, otherwise people won't be able to see them! if you are looking for the ones that fit in the holes, then bike litz makes them and you can find them doing a google search. hope this helps, any more questions, just shoot! :thumbup:

I'm bumping this thread because I'd love to get the same signals Ninja007 has but painted CP Blue on the non-lens areas. The length was clearly designed for the previous generation but I like it because it would hide a crack caused by my stupid driving (tried to trive off with a cable lock through the forks/tire and around the fairing, causing it to tighten and crack). I don't want to order the paint for something so small and minor. Anyone know who could reasonably do such a small job? Heck, I might as well try to find some other bits to get done at the same time.

These are the flush mounts I installed bought them on ebay.