So I know this topic has been discussed a lot but I just installed some LED front turn signals, the back are stock. I know you have to buy a different relay with the 3 prone things but is there one that will fit the 2 prone without any modifications? and if so does anyone know the name of the relay? Thanks in advanced.

See this thread for a link to a 2-prong solution: http://www.ninjette.org/forums/showthread.php?t=88022

If you do not plan any other upgrades to your lights, the Tridon EL12 *may* work, though there have been issues with that one before.

The Tridon EP34 works for our bikes and just requires a ground wire installed. All you need is a female spade connector, about 6 inches of wire, and a ring connector at the other end to slip under a bolt on the frame. i hooked mine up to one of the bolts on the rear seat bracket.

Thanks for the quick reply and for the info