I have OEM blinkers in the back. When i switch them on, they just come on not flash. If i switch the right on, it comes on but doesn't blink. Vice versa witht the left. I bought the integrated LED turn siganl mirrors for the front. I knew they wouldnt work properly but thought they would at lest come on. They wont even light up. the wires to the front are hot. I tested them and they are okay. When I purchase the relay, will that fix the problem? Any help wuold be great.

I have LED front flush mount turn signals and stock rear. Replace the relay and you'll be good. The LEDs don't draw enough current to trip the stock relay.

Thanks. What model # is that? at autozone?

Sorry, not sure. I bought mine with my turn signals from http://www.modmy250.com/. The site owner is a forum member here.

Tri (@CThunder-blue) is the guy at modmy250.com who is helping on the other thread.

The relay you want is the Tridon/Novita EP34. Make sure you get that brand as off brand relays, even with the same number, do cause issues with the flasher.

Thanks a lot for the info. Will try this tonight and post tomorrow