View Full Version : CA Emissions removal


Olie
April 29th, 2014, 08:19 AM
After working on the carbs this weekend I realized my bike has all the CA crap on it. Seems to just clutter up everything. Anyone remove it along with the clean air stuff? Searched though the DIY section and didn't see anything on it.

alex.s
April 29th, 2014, 08:25 AM
it's common. useless weight imo

dino74
April 29th, 2014, 09:41 AM
... useless weight imo

Really? The air quality in the L.A. basin was horrible in the 80s.

Thirty years later despite more people and cars the air quality has improved drastically.

I wouldn't say its useless weight.

KrazyWalle
April 29th, 2014, 10:19 AM
I have everything removed. You just need to plug a vacuum line off the left carb, one of the tank lines, remove the one line to the air box. Also pull the canister thing get a crank case filter and the emission block of plate for the eng valve cover.. I did it a while ago so memory is vague. Just search for the Ca. emissions diagram and remove it ALL!

alex.s
April 29th, 2014, 10:29 AM
Really? The air quality in the L.A. basin was horrible in the 80s.

Thirty years later despite more people and cars the air quality has improved drastically.

I wouldn't say its useless weight.

1) he lives in hawaii
2) it's a 250. even with no emission control and a horrible tune its not putting that much out.

Olie
April 29th, 2014, 11:07 AM
Thanks everyone for the input. I will be tackling this in the next week or so. I'll try and take lots of pics and maybe put up a DIY. I need to pull the carbs too to clean them and check jet sizes so might at well punch it all out at once. If anyone knows of a DIY, please post it up.

fishdip
April 29th, 2014, 12:10 PM
Thanks everyone for the input. I will be tackling this in the next week or so. I'll try and take lots of pics and maybe put up a DIY. I need to pull the carbs too to clean them and check jet sizes so might at well punch it all out at once. If anyone knows of a DIY, please post it up.

http://faq.ninja250.org/wiki/Main_Page

alex.s
April 29th, 2014, 12:46 PM
http://faq.ninja250.org/wiki/Main_Page

wrong website.

fishdip
April 29th, 2014, 12:49 PM
wrong website.

and why is that? it is the only website that covers the ninja 250 the best.

alex.s
April 29th, 2014, 12:58 PM
and why is that? it is the only website that covers the ninja 250 the best.

its a pregen website. op has newgen.

fishdip
April 29th, 2014, 01:03 PM
its a pregen website. op has newgen.

Umm it has it http://faq.ninja250.org/wiki/2008_(and_up)_EX250J_Info

alex.s
April 29th, 2014, 01:41 PM
Umm it has it http://faq.ninja250.org/wiki/2008_(and_up)_EX250J_Info

looks pretty ****** to me compared to the newgen specific wiki on this page.

alex.s
April 29th, 2014, 01:42 PM
Umm it has it http://faq.ninja250.org/wiki/2008_(and_up)_EX250J_Info

notice how it has no emission control removal instructions there?

but its better, right?

broilmebk
April 29th, 2014, 02:48 PM
We're talking about the Kleen air system (https://www.ninjette.org/forums/showthread.php?t=9948) right?

mrudich
April 29th, 2014, 02:54 PM
I have a pregen and I was wondering if there are any pros or cons to removing or leaving it on.

Is there a reason to take it off?
Is there a reason to leave it on?

Thanks!

broilmebk
April 29th, 2014, 02:56 PM
I have a pregen and I was wondering if there are any pros or cons to removing or leaving it on.

Is there a reason to take it off?
Is there a reason to leave it on?

Thanks!

We're talking about the Kleen air system (https://www.ninjette.org/forums/showthread.php?t=9948) right?

mrudich
April 29th, 2014, 02:58 PM
I'm talking about the pregen equivalent of the CA Emission thingy. I just hear of people removing the CA Emission thingy and I've been wondering if there's a reason.

alex.s
April 29th, 2014, 03:01 PM
did the pregen even have emission controls?

broilmebk
April 29th, 2014, 03:04 PM
^Actually, yea I was wondering the same thing after I posted that.

I'm talking about the pregen equivalent of the CA Emission thingy. I just hear of people removing the CA Emission thingy and I've been wondering if there's a reason.

If you click the link it says at the beginning what it is and why people remove it. If the pregen has one, it should do the same thing?

BoBO
April 30th, 2014, 10:39 PM
After working on the carbs this weekend I realized my bike has all the CA crap on it. Seems to just clutter up everything. Anyone remove it along with the clean air stuff? Searched though the DIY section and didn't see anything on it.

My 08 250 had a few missing emission parts, when I bought it. The P.O. did plug the chimney,however, it looked messy. The smog block off plate made it look cleaner. I did help reduce most of the backfire, if you upgraded to a slip-on or full exhaust. On top of the weight reduction.