Could I get a confirm or deny that the 300 uses the same M/Cs as the 250?

aren't the 300s all ABS now?

aren't the 300s all ABS now?

No

Hmmmm who has a 250 an a 300?

Wish I new how to work the manuals in the wikki :confused:

aren't the 300s all ABS now?

R3 apparently doesn't have it as an option in the US
N300 optional
cbr300r optional
rc390 standard

I think they all have abs standard in the EU though

R3 apparently doesn't have it as an option in the US
N300 optional
cbr300r optional
rc390 standard

I think they all have abs standard in the EU though

Can you go peep your bikes and see if the whatchacallit is the same on the 250 an 300? Check the OP :bounce:

Can you go peep your bikes and see if the whatchacallit is the same on the 250 an 300? Check the OP :bounce:

nope, my 250 doesn't have a stock braking system in the front. Thing bites like mad, I've gotten the rear off the ground with it...at the track :angel:

The rear appears to be the same though, same type of reservoir in the same location mounted pretty much the same way. This leads me to believe that the front would be interchangeable as well.

nope, my 250 doesn't have a stock braking system in the front. Thing bites like mad, I've gotten the rear off the ground with it...at the track :angel:


stock 250 brakes can endo

stock 250 brakes can endo

interesting, I haven't managed to get the rear off on my 300

it's definitely not stock though, the caliper is massive compared to my 300 caliper.

interesting, I haven't managed to get the rear off on my 300


if you slam the front it locks but if you ease into grabbing the **** out of it, you'll lift the rear.

Well y'all as helpful as a barrel o damn monkies...

One day I hope I'm cool enough to endo without winding up on my head

interesting, I haven't managed to get the rear off on my 300

it's definitely not stock though, the caliper is massive compared to my 300 caliper.

Can confirm that the stock 300 brakes can endo. Only things changed on mine are the pads and line.

Hmmmmm where's your YouTube? :rotflmao:

Hmmmmm where's your YouTube? :rotflmao:

I'm slightly busy at the moment, will upload some jennings stuff soon

I'll give you 1 guess to figure out the youtube account ID

I'm slightly busy at the moment, will upload some jennings stuff soon

I'll give you 1 guess to figure out the youtube account ID

You got indo vids?

You got indo vids?

Just track stuff, I'm considering doing an edit of the jennings footage in addition to uploading the mock race when I have free time during winter break

Good ****... Um go make some indo vids

If you don't have a camera I suggest the contour. It's decently priced and very easy to use, csmith has one

I have plenty of cameras, just none like you yappin bout. You drunk posting again?

O.P... I think if it were someone woulda said something by now... I've looked and looked and haven't found, when so many parts the interchangibility is easy to find... I'd say if you wanted it bad enough you could make it work, but plug an play is doubtful. Prove me wrong one way or the other... Inquiring minds :confused:ya know :clapping:

Brakes are the same. 250 new gen ABS > 300 ABS. 250 new gen non ABS > 300 non ABS. No idea in the pre-gen brake although I'd be surprised if he internals are exactly the same..

interesting, I haven't managed to get the rear off on my 300

it's definitely not stock though, the caliper is massive compared to my 300 caliper.

Definitely lifted the rear while emergency-braking my stock 250J