View Full Version : My LED strip turn signal lights ....
tc3jg May 28th, 2009, 01:37 AM No extra resistors needed.......
used stock lights for that
they blink in unison with the fronts
http://i292.photobucket.com/albums/mm22/tc3jg/th_VIDEO0001.jpg (http://s292.photobucket.com/albums/mm22/tc3jg/?action=view¤t=VIDEO0001.flv)
hzrnbgy May 28th, 2009, 03:11 AM very nice. i wanted the same but i just dont have the guts to drill into my fairings
tc3jg May 28th, 2009, 02:16 PM Hey thanks alot yes I was a little apprehensive at first to but the hole is only about 2 to 2.5 mm so its not even that noticeable if I removed the lights. dont let that stop you from doing the mod as its well worth it I havent had any trouble with the police either.
dmonaco05 May 28th, 2009, 02:46 PM idk y cops would hassle u from the vid its more noticeable than the stock. lights
tc3jg May 28th, 2009, 03:56 PM idk y cops would hassle u from the vid its more noticeable than the stock. lights
yeah those are my thoughts as well but some say I may get some FLack because they are not DOT approved. but cross our fingers
tylerdurden119 May 28th, 2009, 04:27 PM SICK....very sharp. Looks reaaaally good, bet they look amazing at night. :thumbup:
DsmRacing May 28th, 2009, 04:53 PM I have yet to rip the rear end of the bike apart, preparing to move right now. I really like the look of the license plate look. Did you just drill some holes? How is it attached.
tc3jg May 28th, 2009, 05:49 PM Hey thanks alot Tyler ... yeah at night they are pretty ridiculous cant say you didnt see me they kind of light up the ground to the right side of the bike as well or the left if that signal is on.
to DSMracing- Yes I just drilled some holes and placed two L brackets behind the plate but there is a strip of metal behind the plate that the brackets go into so they dont have to go into the plate itself.
few more pictures
http://i292.photobucket.com/albums/mm22/tc3jg/DSC00837.jpg
http://i292.photobucket.com/albums/mm22/tc3jg/DSC00840.jpg
Seth May 28th, 2009, 11:33 PM I'm guessing they are similar to the ones i got of ebay, i do have the problem that they blink faster than stock but thats because i have aftermarket ones at the front also.
The ebay seller supplied me with an Electronic LED relay but it's 3 pins compared to the U shaped one the Ninja has, with only two pins.
If anyone has applied a 3 pin flasher relay please let me know how to do it.
oeiusDrtt-k
k4y-PwUJHSE
I didn't drill anything but slided the wires in through a small gap left by the fender eliminator kit.
akcalhoun November 16th, 2012, 09:45 AM so u just spliced them in? also where did u buy them they look nice :thumbup:
himynameisjoe November 16th, 2012, 12:35 PM so u just spliced them in? also where did u buy them they look nice :thumbup:
I feel pretty confident in saying these guys aren't going to be commenting back...
akcalhoun November 16th, 2012, 12:47 PM I feel pretty confident in saying these guys aren't going to be commenting back...
lol opps didnt notice the date
himynameisjoe November 16th, 2012, 12:48 PM lol opps didnt notice the date
lolol yeah. That being said, these are pretty slick! I dig em'!
cuz November 16th, 2012, 01:01 PM so u just spliced them in? also where did u buy them they look nice :thumbup:
yes
http://www.ebay.com/itm/SUPER-BRIGHT-LED-2-x-12-Flexible-Strip-Car-36LEDs-SMD5050-BLACK-PCB-RED-/290624207777?pt=US_Car_Lighting&hash=item43aa8d7ba1
http://farm9.staticflickr.com/8343/8190672705_c181fed32b_c.jpghttp://farm9.staticflickr.com/8338/8191744222_8d07df1c48_c.jpghttp://farm9.staticflickr.com/8344/8190665397_2bb4215840_c.jpghttp://farm9.staticflickr.com/8199/8190660621_2eef17e19b_c.jpg
cuz November 16th, 2012, 01:08 PM Just noted that it for signal lights mine r just a extra brake light(s)
Mowgli November 20th, 2012, 09:32 AM Do you have night time pics of those?
cuz November 23rd, 2012, 09:43 PM Mowgli
http://farm9.staticflickr.com/8350/8213190536_942cb7d53c_b.jpg
BRAKE!!!
http://farm9.staticflickr.com/8340/8213190648_ef3fae3231_b.jpg
Kstorm21 November 23rd, 2012, 11:51 PM Didn't someone do something similar but as front turn signals?
LNasty January 3rd, 2013, 01:43 PM Can you show more on how you wired those in for the brake lights?
|
|