i was browsing ebay and came across this.
it looks very clean.

http://cgi.ebay.com/Kawasaki-Ninja-250R-08-09-Fender-Eliminator-Tail-Kit_W0QQitemZ360159782364QQcmdZViewItemQQptZAU_Motorcycle_Parts_Accessories?hash =item53db3225dc&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1171%7C240%3A1318%7C301%3A1%7C293%3A1 %7C294%3A50#ebayphotohosting

I like it, I just can't see myself removing the fender though cause It's my only ride and in rain is sure does help tons compared to my fenderless cbr

Looks good, but not for $100AU. All you need is two L-brackets ($1), two plate light bolts ($15), and the stock metal plate holder and you have the same thing.

Looks good, but not for $100AU. All you need is two L-brackets ($1), two plate light bolts ($15), and the stock metal plate holder and you have the same thing.

where would one buy L-brackets? :thumbup:

where would one buy L-brackets? :thumbup:

at the L-bracket store, where else? :D

try a hardware store.

help me with a link to the thread with L-brackets please so i know how they look

http://images.google.com/imghp?hl=en&tab=wi

type in "L brackets". :p

but which size?

but which size?

be creative.
i don't think we all use the same L-bracket. :D
I used a t-bracket and bent into an L.
you should start by looking at the fender to see what you want to do before you start cutting.
good luck.
2270

I think i'll probably be doing mine today. I'll get some pics up if i do

that is a pretty nice kit. i like that it comes with the two lights.

but yeah, i have seen some of the diy jobs that came out really nice for real cheap.

http://www.ninjette.org/forums/showthread.php?t=21090

but which size?


It's up to you. Once your fender is removed, hold your plate up where ya want it. Then make one L bracket that connects the plate/bracket to the two tail lite bolts :thumbup: