http://cyber-ninja250r.darkbb.com/bursa-aftermarket-ninja-250r-f23/wts-new-items-11-06-2009-jams-jaya-abadi-motorsport-plug-n-play-accessories-shop-for-kawasaki-ninja-250r-pioneer-of-custom-bodyworks-see-page-1-for-new-items-be-like-no-others-be-different-t2159.htm

Alot of their stuff is similar to the Sportisi stuff I sell. But the do carry a few things I don't.

Well If I could only read what it says haha!

They have nice dress up things !

Ya they do. They don't make their own stuff though. Anything you see on their sight I can get made.

Ya they do. They don't make their own stuff though. Anything you see on their sight I can get made.


There are lots of nice farkles there that haven't made it over here yet. I don't know that we really even have an application for most of 'em, or even what some of them are called (that little finger thingy that goes on the left side swing arm that protects the sprocket, for example). But hey, it would be cool to have the option to purchase them!

Ya they do. They don't make their own stuff though. Anything you see on their sight I can get made.

get hot on getting those hid projectors made sir, lol. it would be nice if i can those .:D i was just thinking about those today and here they are.

I will look into it. I'm pretty sure they would be close to $300 or more though due to the amount of work that actually goes into making one of them.

That would be great. Personally $300 would be worth it. Its better that spending it on the crapp diy angel eyes on ebay where u have to break apart the headlight assembly and drill holes in it. Plus it will kill two birds with one stone by not having to do a separate hid conversion if these are made with ballast attached and just pluggin them in to the stock harness. I'm sure there would be a market for these here =).
Posted via Mobile Device

Probably would be a market. But if I were to make them I would not include HID's with the kit. I have never seen a headlight like this come with them. If you want H7 HIDs to go into it and come with it thats a $125 easily tacked on. My $300 was very conservative. But you can easily be looking at a $500 setup for just a headlight upgrade. I will talk to my guy and see if he can source them for me directly. You may get lucky and it may be cheap.

@g21-30 thank you for the information. The most surprising part for me is that i can understand the language. :confused: I don't know what kind of language they use in Indonesia, but it seems they have common words with Turkish and Arabic.

lol! maybe you could translate it for us then bogdanb? Did you ever get your R and G sliders by the way?

lol! maybe you could translate it for us then bogdanb? Did you ever get your R and G sliders by the way?

:D Yes, thank you. I am trying to find a new place to order parts from.
These Indonesian sliders looks week to me. :)

@g21-30 thank you for the information. The most surprising part for me is that i can understand the language. :confused: I don't know what kind of language they use in Indonesia, but it seems they have common words with Turkish and Arabic.

Good for you, bogdanb! I'm impressed.

Indonesian (Bahasa Indonesia) is the official national language of Indonesia. Don't worry, I didn't know that, but got it from wiki (google).

Well people indonesia is the world largest concentration of Muslims worldwide. The language of choice is Arabic for the religion. Bahasa, English, and Dutch are the primary used languages. So I'm not suprised if Arabic would be used or atleast has influenced the Bahasa which is a derivitive of Malay. How do you like them apples? LOL I guess linguistic class wasn't a total waste.

the swing arm cover looks really good and the little air scoop for the front does to!

The swing arm cover it a rip off of the sportisi one. The only made slight changes to it. The little air scoop I'm actually going to have made.

well guys, here is my little donation in translation :D

i wont post all the images thats on the other forum, but it should be clear, and you can always refer back to the original thread @ http://cyber-ninja250r.darkbb.com/bursa-aftermarket-ninja-250r-f23/wts-new-items-11-06-2009-jams-jaya-abadi-motorsport-plug-n-play-accessories-shop-for-kawasaki-ninja-250r-pioneer-of-custom-bodyworks-see-page-1-for-new-items-be-like-no-others-be-different-t2159.htm

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02506s.jpg
TUKAR TAMBAH LAMPU DEPAN PROJECTOR + ANGEL EYES (BIRU,PUTIH,MERAH) (BELUM TERMASUK HID)
replacement head light projector + angel eyes (Blue, White, Red) (excluding HID)

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02461h.jpg
FOOTSTEP UNDERBONE TDR TERSEDIA WARNA CHROME DAN COKLAT
Footstep Underbone in the following colors: Crome, and Brown

then there is the single seater, no need to translate,

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02390.jpg
UNDERCOWL
huh... this covers the underbelly? holes are for the oil filter and nut i guess.

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02452a.jpg
TUTUP GEAR DEPAN FIBER
i believe this is the front sprocket cover in fiberglass

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02309.jpg http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02312.jpg
CONTOH FIBER:
fiberglass sample, product from others, compared to the JAMS sample, he he.

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02251c.jpg http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02337.jpg
BREKET PLAT NOMOR BELAKANG ALUMINIUM ADJUSTABLE w:110gram
number plate bracket, in Aluminium

http://img.photobucket.com/albums/v86/wayanlam/dsc02034dj0.jpg http://img.photobucket.com/albums/v86/wayanlam/dsc02333.jpg
PADDOCK SLIDER ALUMINIUM DAN NYLON w:50gram
rear stand nobs, in Aluminium and Nylon

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02280j.jpg http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02272s.jpg
BODY SINGLE SEATER UNDERTAIL LAMPU w:1.600gram
single seat body kit, with under tail light. (i dont really see the light tho)

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02232l.jpg
SPARKBOR DEPAN ZX-6 w:455gram

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02245g.jpg http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02281.jpg
KONDOM TANGKI w:535gram
fuel tank cover

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02212.jpg
TUTUP MINYAK REM BELAKANG w:15gram
rear break oil reserve cover

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02216i.jpg
BREKET KNALPOT (STEINLESS) w:430gram
Stainless steel Exhaust bracket

http://img.photobucket.com/albums/v86/wayanlam/dsc02202v.jpg
COVER RADIATOR ALUMINIUM, PENGERJAAN MENGUNAKAN MESIN TANPA LAS. w:165gram
radiator cover, Aluminium, manufactured without any welding.

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02473.jpg http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02297a.jpg
-CUSTOM FIBER SWING ARM GSX 600, LIDAH TERSEDIA DALAM WARNA HIJAU, MERAH, DAN HITAM w:1.025gram
fiberglass swingarm cover, available in: Green, Red, and Black.

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02190hq9.jpg
-CUSTOM AIRSCOOP w:130gram

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02135bz0.jpg
-CUSTOM V-FAIRING (COVER ENGINE) w:130gram

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02370l.jpg http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02145km9.jpg
-BREKET PLAT NOMOR SAMPING w:260gram
number plate bracket

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02089ly6.jpg
1 SET DEPAN BELAKANG KALIPER TOKICO GOLD 6 PISTON BREKET. TINGGAL PASANG.
1 set front and back brake calipers, Tokico Gold, 6 piston. plug and play

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02080ey1.jpg http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02087zx4.jpg
STEERING DAMPER EX-MOGE TINGGAL PASANG
Steering damper, plug and play

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02100qt2.jpg
KACAMATA REFLECTOR PROTECTOR (RED, GREEN GOBLIN, CLEAR, SMOKE) w:50gram
headlight protector, available in: Red, Green Goblin, Clear, Smoke

http://img.photobucket.com/albums/v86/wayanlam/dsc02048xk7.jpg
TUTUP RANGKA DURALIUM w:155gram
replacement cover thingy

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02076fh7.jpg http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02208z.jpg
WINDSHIELD JAMS w:240gram
available in: smoke, clear, green effect, green goblin, red

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02013ej8.jpg http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02339.jpg
stang jepit ex-moge tersedia dari berbagai merk
various brands of handlebar replacement/lowering front kit

there you go guys, hope that helps, he he...

i personally just sent them a message thought that forum, but i might have to call them directly to find out about prices, cos i want some of the things that they have there.

cheers,
w.

let us know about the pricing and shipping info. stuff looks good

lol what part of anything you see there I can get for you didn't you guys hear. If you go an get them yourself your going to get killed on shipping. JAMS does not make any of their own products. There is a guy in Jakarta known as the extreme mod god who makes them. I have been in talks with the guy about bring over some of his stuff. The guy on the forum doesn't respond to PM's I tried for months.

lol, we heard ya :thumbup:, we are just like little kids in a candy store. just cant wait to get our little hands on some goodies. :D

yea, i had my doubts about getting a response from them through the forums, but they do have a telephone number, and address of their workshop, i might just call them, since its a local call for me here, lol

i just posted the translations for the benefit of our forum readers since a fair few people were moaning about not understanding the descriptions.

Anyone trying to get prices and goods shipped over should best go through Matt i would imagine, since hes the one that is working on importing the goods over to that end of the globe from Jakarta, I'm just a bystander watching from all the way here, wishing i could get things that are only available in America. while you guys want things that are only available here... how typical we humans are xD

if anyone needs a hand with translating things from Indonesian forums, feel free to hit me up, if i have the time, and if i can understand their abbreviated slang, id be happy to help (using internet translators doesn't really work on Indonesian forums, they are riddled with abbreviation, and slang words, rofl~)

peace out.

Thanks Wayanlam. Sportisi is opening a shop in Bali. If you ever need anything go in there and ask for Santoso tell him Matt sent you. And tell him I said to hook you up with some deals.

yeah, brahm already gave me the cell number of santoso a couple weeks back and told me to call him up when i want to see some of the sportisi stuff here in Bali. im still at the point of saving up after cashing out on the bike itself... so no major mods just yet for me.

however im really tempted to go with importing a full quiet AreaP exhaust + dinojet kit2 from the states. im still ripped between two worlds here.

i might just have to go see Santoso and maybe he has a ninja already fitted with their sportisi exhaust/rejetted, etc, so i can see for myself if their product is what i want/like.

are you from Indonesia yourself that you have this contact here, or just decided to get into this business venture of importing the sportisi goods over to the states as a little side hobby/job?

ps, my name is Wayan

That airscoop does look pretty nice...its not functional though is it? And IMHO I like the swing arm cover on the hugger but that's just me. Any idea how much that airscoop would go for matt?
Posted via Mobile Device

lol what part of anything you see there I can get for you didn't you guys hear. If you go an get them yourself your going to get killed on shipping. JAMS does not make any of their own products. There is a guy in Jakarta known as the extreme mod god who makes them. I have been in talks with the guy about bring over some of his stuff. The guy on the forum doesn't respond to PM's I tried for months.

We all know you can get them. We, as consumers don't mind more competitions. The more the better. That's the only way to control the price. Furthermore, you don't have to brag about your products and trash others'. If yours are made of high quality and the prices are right, then we will come to you. You keep saying that they don't make their own products. Do you actually make what you sell? Sometimes, you don't neccessarily have to make what you sell. You just have to carry the best products on the market at the best prices.

I don't think he's trying to brag that his parts are better by saying that JAMS doesn't make their own parts. What he was trying to get across was that he can talk to the actual manufacturer of the products and have them imported for much less than what you'd be paying to have them shipped from Jakarta or where ever they are.
And personally, I'd let Matt brag if he wants to, lol. He's bringing over parts we want for some ridiculously low prices. He's earned the right :p

I don't think he's trying to brag that his parts are better by saying that JAMS doesn't make their own parts. What he was trying to get across was that he can talk to the actual manufacturer of the products and have them imported for much less than what you'd be paying to have them shipped from Jakarta or where ever they are.
And personally, I'd let Matt brag if he wants to, lol. He's bringing over parts we want for some ridiculously low prices. He's earned the right :p

sorry, may be bragging wasn't the correct term.

I was trying to get across that I can source them for cheaper and thus get better deals for all of you. :) Not bragging. Wayan if you want an AP exhaust let me know and I will try to help you get one. As for the Dynojet kit sportisi is a dynojet distributor there in Indonesia. And this statred as a business venture but now I have several friends that work there. Bram is at the race track today so I hope he can find out prices forme on a few of the items you Guys see on JAMS. The Airscoop is certainly going to be made. I'm going to price the rear sets (since the ones I sold were ok but not as good as these I think) and headlight. I won't bring over theswingarm cover and hugger though because it is to close to the Sportisi one which started it all. Since they borrowed brams design without permission I don't feel right importing it plus it is competition within my own product base.

If you guys want something seen here please add it to the list:

Airscoop
Headlight
Rear set

Yup. Headlight and airscoop for me.
Posted via Mobile Device

Oh and I forgot to mention the Sportisi rear hugger is now available with Real Carbon Fiber on the hugger portion not the cover. And they will be custom order due to the extra running around needed.

sorry, may be bragging wasn't the correct term.

No need to apologize, I just felt I needed to clarify ;)

So matt...any rough estimate on that airscoop? And is it functional in any way?

Matt there is no functionality of the scoop. Just for looks. I'll update you guys when I know. Bram is racing the Sportisi Company bike today so I probably won't know anything until monday.

Alright sounds good...maybe another thread should be started?

No let's not clutter the board.

lol, okay matt, and if you need some coconuts or sea shells let me know, i can hook you up with some good deals!! xD

jk jk~

thanks for the offer regarding the exhaust from AP, however i've been in touch with Kerry directly over in AP, and he's given me plenty of feedback, shipping prices / dimension / weight, etc.

and since AS sell dynojet kits for 79$ (i dont think it would make a difference in the shipping cost if they lob that in with the exhaust), ill save money if i get it from them at the same time. Sportisi quoted me the dynojet for $120 (excluding installation i believe). the 40 buks i save on the dynojet can compensate for the shipping a little :)

yup good luck.

hey guys....that website showed some crazy parts...i am interested in the ducati 1098 style tail..

ztrack - can you get that?

i would want a plug and play version that would be street legal with turn signals and all..

I can get the tail. Plug and play aint happening

ok i'm interested.....what about the turn signals and stop light..what needs to be done ....tell me more about it....pictures... the works...

Not quite that simple. give me a few days to research it. The turnsignals and tail light should be to hard to do

ok ..awesome..now i'm looking for this one...just to make sure we are on the same page...

not the green racing one....

Hey Matt,

I'm in for one of those tails as well. I have an undertail kit that will mount turn signals and the plate already if they aren't included

Thanks

hey guys....that website showed some crazy parts...i am interested in the ducati 1098 style tail..

ztrack - can you get that?

i would want a plug and play version that would be street legal with turn signals and all..

Other Ducati bikes have the scoop too... 848, 1198, etc. I'm not a big fan of that turned down "hook look" on the tip but I have LONG desired the air-scoop look and an undertail. The awesome integrated turn signals and, of course, the uniqueness are enough to make me ignore the "hook shape." HOW MUCH?!

MAn so I have like 5 people wanting these tails. I'm pricing. I'm pricing

If I get them for you guys you are responsible for all costs. And I will charge a 10% service fee since I do not intend on selling them.

I can get the tails. But I will need definite confirmation on them by you guys as well as the color you want them. Should have a price in a few hours. and you have until tomorrow evening to place an order.

Ok nm about previous post time will be needed theres only one left in stock.

These I can get for $225. And it comes painted. Cheapest way to get them is ocean freight with a month+ wait. and the price would be under $300 total or real close to it. The fast way and your looking at about a $400 tail.

The swing arm cover it a rip off of the sportisi one. The only made slight changes to it. The little air scoop I'm actually going to have made.

Actually, the hugger is a GSX 600 style one, so it's really a rip off of THAT. ;)

4484

Top: The GSX 600-style hugger and swingarm cover on a 250R.
Middle: An GSX 600 swingarm & hugger.
Bottom: An OEM GSX 600 hugger piece.

Nothing like Sportisi. As it stands, your Sportisi hugger matches the bike's style better (this ain't no GSX!), but the GSX one also has holes for mounting swingarm spools and the sideways plate holder. Looks possible to rig up a chain guard too. Perhaps Sportisi should incorporate that in a little update of their own? Regardless, I like Sportisi better and will be buying yours. :)

Some of the bikes in the Indonesian thread actually have the Sportisi cover... unless, of course, those are the knock-offs you were talking about (they were only visible on shots trying to sell something else).

...

http://img.photobucket.com/albums/v86/wayanlam/JAMS/dsc02216i.jpg
BREKET KNALPOT (STEINLESS) w:430gram
Stainless steel Exhaust bracket

...

Is that smaller piece for the other side or is it a spacer to compensate for the hanger not having bends? Only way I could see it working without a bend or two is by having angled mounting surfaces.

Hey Matt,

I'm in for one of those tails as well. I have an undertail kit that will mount turn signals and the plate already if they aren't included

Thanks
It looks like the turn signals are integrated into the "duck tail."

http://www.ninjette.org/forums/attachment.php?attachmentid=4309&stc=1&thumb=1&d=1254040048

See those wedges on either side of the tail light?

It looks like the turn signals are integrated into the "duck tail."

http://www.ninjette.org/forums/attachment.php?attachmentid=4309&stc=1&thumb=1&d=1254040048

See those wedges on either side of the tail light?

Wasn't sure if that was a turn signal or if that was the inside of the scoop

The scoops are dummy scoops

The scoops are dummy scoops

Ya that's what I was thinking, if there were lights on the back the scoops would just be ornamental

Wasn't sure if that was a turn signal or if that was the inside of the scoop

Well, they're the turn signals on a real 1098SS too. ;) It'd be easier to tell if they were red. I wish the tail light was more like the real 1098 too, but it's still "durned purty."

FWIW, modern GSXR bikes have integrated ducktail signals too.

Well, they're the turn signals on a real 1098SS too. ;) .

beggars can't be choosers you guys are lucky I'm willing to source the parts.:cool:

Well, they're the turn signals on a real 1098SS too. ;) It'd be easier to tell if they were red. I wish the tail light was more like the real 1098 too, but it's still "durned purty.".

So are the scoops ornamental on them too?? Might have to check out the 1098SS and see. Can't wait to get my tail in, kinda sucks that the weather here is crap though. It is cold and rainy today, hope that I might sneak in a quick ride this weekend before winterizing and bringing all the plastic in for the winter to work on it.

Hey Matt, am I the only one who came through or did others order one too? It is gonna be cool to be the only one in Canada with one, it would be even cooler to be the only one on Ninjette to have one

So are the scoops ornamental on them too?? Might have to check out the 1098SS and see. Can't wait to get my tail in, kinda sucks that the weather here is crap though. It is cold and rainy today, hope that I might sneak in a quick ride this weekend before winterizing and bringing all the plastic in for the winter to work on it.
I dunno... all I know is that they have a lot of different Ducati bikes with the scoops (not just the 1098).

Hey Matt, am I the only one who came through or did others order one too? It is gonna be cool to be the only one in Canada with one, it would be even cooler to be the only one on Ninjette to have one

FWIW, I'm TRYING to order one but he hasn't been able to source a second yet. :( He did tell me in a PM that he was only able to get one for you so far.

FWIW, I'm TRYING to order one but he hasn't been able to source a second yet. :( He did tell me in a PM that he was only able to get one for you so far.

Ya I got lucky the one they had in stock was green so I snagged it

Looking for more I need to talk to the guy who makes them.

Would they be able to get a cp blue one? Also does it include the tailight or just the tail. Or better yet what is included? thanks matt for helping us out.

Tail light and turnsignals all built in

Tail light and turnsignals all built in

TWO sets of turn signals, apparently! Any luck sourcing more yet? CP Blue perhaps?

TWO sets of turn signals, apparently! Any luck sourcing more yet? CP Blue perhaps?

Where is the second set??

Where is the second set??

http://www.ninjette.org/forums/attachment.php?attachmentid=4309&stc=1&thumb=1&d=1254040048

The << >> shaped ones integrated into the sides of the tail (kinda the definition of a "ducktail") behind the air-scoops (kinda like false vents for the scoops) and the \―\ /―/ slit ones integrated into the undertail.

Oddly enough I didn't notice the bottom ones....that are most likely going to be blocked by my plate, unless I can mount the plate just under those ones....will have to see when it gets here

Oddly enough I didn't notice the bottom ones....that are most likely going to be blocked by my plate, unless I can mount the plate just under those ones....will have to see when it gets here

Yeah... I didn't notice them until today either. A lot of people mount their plate deep in the wheel-well area with undertails like that, risking a ticket if the tire blocks visibility. Others mount it flush a bit higher, but they risk a ticket for sure. Still, others mount it sideways off of the swingarm like seen above (I've seen several around here doing it).

You can see the 2 bolts at the tip that they intend for mounting an undertail plate holder (I think you can see it on page 1 of this tread...really ugly poor design) that would definately block those signals

VJiwsLI6TF0

ihBK3V2V99o

Ya I've seen those on ebay....really don't think they are legal here in manitoba though

so what's the deal 400? shipped to NC? just for the tail? and did you need special brackets to mount these or what's the specs....?

$225 to buy it $75 to ship from where ever they are to Matt and then to me, not that bad of a deal seeming how all the lights are included and built in, not to mention that it is the right colour and that I will be the only one to have it in Canada (I'm hoping) and from the sounds of it the only one on this board so far......can't really put a price on that. Most likely won't get it mounted till next April (winter here snow any day now) but pics will be coming

$225 was the cost for me to buy it (more now since the dollar is in the pits)+ shipping to me $25 + whatever the eventual shipping is to Canada is what Rob is paying (estimate of $50 if its a little less I keep the difference if its a little more then Rob pays it which shouldn't happen). I did this just to get one over here. If there is interest I would say to expect a $400 price tag and it being a special order product due to limited availability and the pain in the butt of acquiring them.

Ya I've seen those on ebay....really don't think they are legal here in manitoba though

Should be legal when parked, right? ;)

Should be legal when parked, right? ;)

and I wouldn't have to worry about those pesky photo radar and red light camera tickets either

Once I get it, I think I'm going to start trying to do an undertail exhaust

Lol rob we might have you covered on that too. Working on proto types now.

Geez Matt, always one step ahead of me

I sneak into your house at night and listen to you talk in your sleep.

Can't wait for the undertail exhaust - any idea on time frame? How does ordering work?

still in the tinkering phase we want to try to make as much power as possible.

http://img.photobucket.com/albums/v86/wayanlam/dsc09532.jpg

yeah, the under tail exhaust would look so good imo. according to the blogger that posted the pic this exhaust was a 1 time mod by someone over here in Jakarta. they spent about $550 getting it made, but there was a noticeable power loss, possibly due to the long pipe needed.

good to hear that the guys over at sportisi are taking their time to get it right when making theirs, to maximize the power with this sexy looking mod :)

http://img.photobucket.com/albums/v86/wayanlam/ForKawiForums.jpg

another mod alltogether, but also really nice:
here they used parts from aprillia and a gsx (kinda vague guesswork by the blogger lol) however the final result looks great too, with the upside down forks and the double disk brakes.

wouldnt mind adding this to my mod wish list :rolleyes:

I sneak into your house at night and listen to you talk in your sleep.

That would explain why my wife is always mad at me after I have a bike related dream...talking in my sleep and some strange guy in our bedroom with a notepad

still in the tinkering phase we want to try to make as much power as possible.

What I was thinking was going up a size in the pipe diameter to make up for the extra bends and length of pipe....I haven't started looking but is there oval shaped mufflers available??

There will be.Think of a VR exhaust an elephant stepped on

still in the tinkering phase we want to try to make as much power as possible.

+2 for undertail exhaust!

Hey Yall, got my tail the other day, so the scoop is all the way through. The only turn signals are the ones mounted on the undertail. The nice thing about the turn signals is you can change the colour of them depending on how you have them hooked up. You can have them Red, Yellow or Blue (might be more, haven't played around with it that much).

That brake light is super bright, I was worried about how small it is but it is definitely bright enough

pictures please :P

If I ever get the POS to fit properly I'll take a ton of pics. Nothing is lining up or fitting properly, a bunch of the nuts that were glued in place fell off. Gonna have to drill a whole lot of holes to get it to fit properly, not to mention that I'm going to have to modify it somehow to get the side pieces back on. Once it's on I never plan on taking it off. A lesser man would have said F*&K it by now and dump it....I'm pretty close to that point, all I want to do is ride and not work on the bike

The tails are a bitch to mount it is an art. Cuss at it in Bahasa it should help. Take pictures of the fitment stuff and I will get the boys to look at it and explain how the hell we get it on. Remove all unnecessary brackets in the mean time for the trunk.

I want those billet swingarm pivot covers....holy cow those things are sweet. I have seen them on other bikes, but I couldnt figure out how they got them to stay put.....

O-rings....should have known....

The tails are a bitch to mount it is an art. Cuss at it in Bahasa it should help. Take pictures of the fitment stuff and I will get the boys to look at it and explain how the hell we get it on. Remove all unnecessary brackets in the mean time for the trunk.

The ones that I think that are causing the problems are the ones that mount the stock undertail, the one I got has cutouts for those brackets to slide through. I was kinda rushing it tonight to see how it all fits together. Before I drill holes for the license bracket I want to get everything else lining up. Maybe tomorrow I'll take my time and work it one hole at a time and see if I can get it to make more sense. But ya I'll take pics of any that give me problems....but ya starting to see how inferior their FG is to the Sportisi stuff

does it require some cut and paste action? x)

http://img.photobucket.com/albums/v86/wayanlam/camera%20mount%20250r/26364_336473747057_645672057_368280.jpg

http://img.photobucket.com/albums/v86/wayanlam/camera%20mount%20250r/26364_336477752057_645672057_368281.jpg

here they were chopping right into the bikes frame to accommodate a single seat gp style. i find mods like this quite invasive, and it would take a Uber good mod for me to even start considering taking a grinder to my bike, lol

Wayan thats a 150RR. LOL

The ones that I think that are causing the problems are the ones that mount the stock undertail, the one I got has cutouts for those brackets to slide through. I was kinda rushing it tonight to see how it all fits together. Before I drill holes for the license bracket I want to get everything else lining up. Maybe tomorrow I'll take my time and work it one hole at a time and see if I can get it to make more sense. But ya I'll take pics of any that give me problems....but ya starting to see how inferior their FG is to the Sportisi stuff


It is super thin so be patient and careful. Now I hope you understand why I was leary of shipping it. I didn't want it to get smashed.

Wayan thats a 150RR. LOL

yeah, i know, but it was the only pic i found of some grinder action :rolleyes:

had nothing to do with your post, i was just wondering if it would require "THAT" kind of modding, he he.

but i heard that there was someone here (at the same workshop) putting on a custom single seater on their 250 and also just chopped parts of the tail frame section to make it fit. but no idea what that looks like.

i still miss my 150RR though :( sold the lil bugger to get the 250~

wish i could get some of that spontaneous acceleration that the 150 has on our 250s.

but, all in all, im happier with the 250 for the daily commute. the pros are:


no kick starting,
dont end up driving 130km/h down some small streets,
dont have the whizzing mosquito 2 stroke sound,
dont need to clean out the S/ KIPS air system every month or two months (pain in the ass),
and last but not least, the 250 looks like a bigger bike that it actually is, lol...


im still looking forward to see the pics of the under-tail exhaust that the guys over at sportisi have put together :thumbup:, and im curious to see how much work is involved to put that together, and finally the $$ ;)

Go to Sportisi and Have santoso put a BRT TIS on your bike. Tell him Matt said to give you a good discount. If he doesn't tell him he knows what my whole village will do to his mother if he doesn't. ;)

Go to Sportisi and Have santoso put a BRT TIS on your bike. Tell him Matt said to give you a good discount. If he doesn't tell him he knows what my whole village will do to his mother if he doesn't. ;)

rofl, ill take your word for it then!

but yeah, i already went to their sportisi Bali worshop several times. i was planning on getting the new CDI from them last year, but then i left for a ski holiday, and spent all of my money, ops...

im gonna get the TIS CDI from sportis, cos they have the dyno, so they can make sure that they dial it in as best they can.

i just bought a K&N pod filter, so once that is in, and the carbs are all jetted properly i plan to do the last performance mod and get the BRT TIS :) (or maybe second last... there is still the replacement carbs that is available for the 250s "Sudco Part#016-3205 for the Keihin FCR31"

http://img.photobucket.com/albums/v86/wayanlam/camera%20mount%20250r/SudcoKeihinCR31Ninja250res.jpg

didnt you mess about with these at some point matt?

have a good week end!
Peace out~

I'd save your money on them Wayan. Especially since your gonna be putting around bali.

I'd save your money on them Wayan. Especially since your gonna be putting around bali.

yeah true that...

well then, BRT tis is my next, mod then, he he...

i just put on the K&N filter in, and will head out for a spin tomorrow, hope the bike runs okay, changed the pilot jets up to 40s, and the mains are 105 now.

needle clip is still in the same position~

yeah true that...

well then, BRT tis is my next, mod then, he he...

i just put on the K&N filter in, and will head out for a spin tomorrow, hope the bike runs okay, changed the pilot jets up to 40s, and the mains are 105 now.

needle clip is still in the same position~

Once you settle on your carb setup (or even before) might consider putting it in the database so others can learn.
http://www.ninjette.org/forums/showthread.php?t=10208

Are you using Keihin main jet sizes?

Are you using Keihin main jet sizes?

im not sure what those #105 mains are :(

i bought the mains on their own because i already had a factory pro jet kit.

now all that's left of the factory pro kit are the needles, lol

the #40 pilot jets i got are original from Kawasaki.

i have a feeling that i might need to play around with the mains. gotta wait and see how she pulls from 3/4 to red-line once i get a clear enough road.

I've been a little lazy to post on the jetting database, but ill get round to that sooon! :p

Most of the 250's run a fuel mix there that is simply to rich for here but perfect there. Are you running a pod filter or a drop in wayan?

http://img.photobucket.com/albums/v86/wayanlam/camera%20mount%20250r/SudcoKeihinCR31Ninja250res.jpg

I've got a set of those. Love them.:thumbup:

Most of the 250's run a fuel mix there that is simply to rich for here but perfect there. Are you running a pod filter or a drop in wayan?

i just installed a K&N pod filter.

http://img.photobucket.com/albums/v86/wayanlam/camera%20mount%20250r/P1040755res.jpg

http://img.photobucket.com/albums/v86/wayanlam/camera%20mount%20250r/P1040753res.jpg

i tried to red line the bike this morning on my way to work, but didnt have enough space on the road, but i have a feeling that when i almost reached redline, the bike coughed and spluttered (too rich?). i am not sure if i hit the cut off, or if it was the new jetting, will have to test that out again once i find a better stretch of road.

For those of you waiting for pics they are in the picture section now

Wayan with a 105 you may still be a little rich. If it is bogging up top then thats an indicator.

Wayan with a 105 you may still be a little rich. If it is bogging up top then thats an indicator.

yeah, i think so too, im gonna go down to 102's tomorrow, am waiting for the mains to get here.

gonna get the brt programmable installed as well tomorrow :) ordered it yesterday with the mains.