The site is now up but not totally finished.:D I want to get some better pictures before I finish the accessories section.

www.sportisimoto-usa.com

yay! nice! im going to take a look.. and BUY! first after saving...

lol I will have those hugger with you name on them when your ready andrew

what about me? i need a hugger too. only if its candy thunder blue, august right?

Yup late august more like september. Takes 3 weeks just to make them all. and another month to ship them. I need to sell this shipment first before I can even think about the next one.

Should have the option of real CF as well. but that will be special order.

you need to add the accessories part of the site :P

Wait... you're telling me that just this exhaust added almost 5whp to this bike?

Tell me yes and I will be buying.

BTW, don't lie. lol

With the addition of a jet kit and a little bit of tuning know how, yes, it probably did. However, these exhausts are for the new-gens...

Customization is nothing new to me. But even the AP or whatever exhaust with a full jet kit and pods only added 1whp.

You're telling me that just this exhaust will add 5whp?

The AP exhaust also gets 30+ hp: http://www.areapnolimits.com/images/product/250r_08_dyno_big.gif

But even the AP or whatever exhaust with a full jet kit and pods only added 1whp.



where did you read that? totally untrue.

The site looks really cool Matt!

http://www.areapnolimits.com/images/product/ex250_dyno_88_big.gif

This is the one I got.

Is there that much of a difference in our engines?

that's almost a 2 hp gain. if you read the development thread Area P went through several configurations before settling on the final kit/jetting and settled on one that had a huge gain in the midrange for the pregens. take a look at the torque curve in the chart you posted.

sorry for the OT, Matt. :o

I do appreciate it. I saw it was pretty much 1 3/4 of a hp gain, but that isn't enough for me to want to get it. I see the very nice gain across the board there but... well I'm just being picky.

nice website just what you needed what do you think an unpainted tail section will cost thanks :thumbup:

PM for you mike.

I just thought this was cool. http://www.sportisimotorsport.com/news-update.php

haha pretty sweet lots of boxes in there!!

I just thought this was cool. http://www.sportisimotorsport.com/news-update.php

I think I spotted my windscreen in there...:)

Ya Andy its in there with a few of its friends.

few? looks like it's got tons of buddies!

I think I have a total of 4 windscreens 3 smoke, 1 green. So yes a few buddys. The huggers have tons of buddies.

yes my clipons will be here soon thanks man it is really cool what you are doing for use :thumbup:

few questions

1) how much for flush mounts?
2)how much for fendereliminator and is it usable with the Bike monkey Integrated taillight? also can we get more detailed pictures??
3)is the GB still good for the vr6 exhaust?? Can i get black on black? and Can I do the early shipping like some of the other ninja owners?

That is it for now...ohh I live in hawaii (for shipping purposes)

$125 Shipped

$125 Shipped

WOW!!!:eek:
Is this an undertail? More pics plz!!!
:confused10:

Matt, how much for the under cowl?http://www.sportisimotorsport.com/resources/risezeSNC00652.jpg http://www.sportisimotorsport.com/resources/resizeSNC00648.jpg
I want one Candy Plasma Blue.

$125 +shipping

Any side pics of that under tail? Will it look just like stock or will it look different

yes please more pics of the undertail with the rest of the stock bodywork please!

That undertail is ****in HOT.

Are they coming in other colors?
And what about w/o the Monster Energy on it?

If these are only green it looks like I'm getting a green bike. ;)

Whattttt...that is pretty much sex. If the monster graphics could be ditched id be on that in a second. I wonder how it would look in the rain though...

yes the graphics can be dropped. the will probably come black with the option fo painting it being a little extra. I will get more pics

Hey Matt, two questions.

Is that a gas tank cover in the picture of the Sportisi track plastics? http://www.sportisimoto-usa.com/resources/bk4.jpg
And are we able to order pieces of the track plastics, instead of all together?

Yes you can order pieces. It will cost you a little more. An the tank cover is part of the kit yes.

Awesome. Looks like when I get a newgen I'll be giving you quite the order. :thumbup:

hey man when i click on accessories nothing comes up.

So I'm guessing with that undertail the plate will have to be moved correct?
Posted via Mobile Device

^nope. look at the two hole in the first pic. Thats for the plate

Ah yes...obliviously haha. When you get a chance could you post an installed pic with a plate on?

man you are killing me you just cant get better then this stuff

Kirana may get one for me since he bought the first batch.

The price on the under tail is gonna go up about $10 since the exchange rate sucks. Buit I will be ordering ten of these.

Also they will come flat black. Color matching is available for an extra $5 and will be a custom order requiring a deposit.

nice website just what you needed what do you think an unpainted tail section will cost thanks :thumbup:

I am also interested in how much just for the tail section... painted (2009 Blue) and unpainted. I assume it works with the stock under tail parts?

yes the tail works with the stock undertail. pm me for a price cause I will give you a deal with the hugger and the tail.

PM Sent

replied

These will be coming in too. $22

I heard those increase charming effect to car when lighting in night. :cool:

are those LEDs on the under tail functioning blinkers??

Hey Matt.

for your body kit, do you know if Bram can start making an Oil containment belly pan kinda like this?:

http://airtech-streamlining.com/images/2EX2OCP%7E1.JPG http://airtech-streamlining.com/images/08EX250_3.JPG

that way we can use these on the race track?

The race prepped kit comes with a belly pan that mounts on the inside of the body kit.

here is one mounted

do you have them ready to ship out from cali

This might just have to be done...:rolleyes:

The race prepped kit comes with a belly pan that mounts on the inside of the body kit.

Were there any pictures of the race prepped kit? I didn't see a picture on the website showing the belly pan.

btw, what color does the kit come in unpainted?

Unpainted the kit is black. I will grab a picture of the bellypan for you when my kit gets in next week. No Mike they are not ready to be shipped from CA yet. They were literally just released and a few final adjustments are being made.

These will be coming in too. $22

Nice.... :thumbup:

You have a PM sir. :)

Hey matt can you sale me one of the metal stickers that go on the exhaust the guy powder coating my exhaust accidently ripped it when taking it off. thanks

also I dont know if you answered this question but does the undertail LED lights work as a turn signal?? thanks.

What about stuff for the 88-07 machines?

Mike yes it functions as turn signals but I would still run some flushmounts on the rear in addition. I can get you a tag for the exhaust for free. It just may take me a couple weeks if thats ok.

ztrack will you be doing a group buy on the under tail and when do you expect to put an order in and how much shipped. I wanted the tail section of the race kit but this will work just the same and will make less work LMK thanks mike

I have put 10 on order. I would do a gb but I couldn't ensure their safety. Plus I would need about 20 people to do it so I didn't go in the hole on them.

that makes sense so when do you plan of haveing them in or on hand

Next month. With the improved mode of transport.

Next month. With the improved mode of transport.

I like the sound of that when would you like payment for a blue one if you have one

also a black one....how hard is the wiring, as I am planning to buy the bike monkey integrated and this might help the DOT aregument. alse does this come with a LP holder or do I have to furnish one??

Wiring isn't to bad. It comes with a bracket but the tail is not pre drilled for it.

There are som orders out there with remaining balances please pm me if you are one of those people.

Something new, price is not determine yet but it will be cheaper than Zartans model and a tad more than Area P's.:thumbup:

^ with an exhaust purchase $35. Otherwise $55 shipped

Any word on mix matching the sets? IE this tail and the fairings/tankcover from the cyclone kit? Thinking that we might be able to get close to 20 for this undertail seems like enough interest

I have 10 on order for the undertail. I've been a little busy so haven't crunched numbers yet. For the undertail if you want one and a specific color you'll need to order it in advance because I will othr wise just order set numbers and you can wait if your color is bought out.

Re: the undertail....are the LED's meant to serve as turn signals or marker lights or depends on how you wire them? Would LED's flash normally with stock wiring? Your last picture shows signal lights on a stalk..you'd have to drill holes for them, right and would the stock lights with their attachment area work ? Do you access to the signal lights used in that picture ? Lastly, what would serve as the license plate light..?..

How much total for an 08 Blue undertail..understand I need to prepay..? I could expect it about when ?

Thanks for fielding all these questions.

License plate light is on you to find. I recommend targa. The leds serve as turn signals and need a resistor unless you wire them in line with the stock signals. They shouldn't be used as the sole signals but can be if you choose. We provide the plate holder and the undertail with integrated signals. The rest is left to your own devices. I still need to see one in person to give a good recommendation.

Keep the cool stuff coming..Makes me want to keep my little 250 :)

^ thats my goal :D

Anyone want a Bike Monkey integrated tail light GB?

^ yeah I would, that'd be cool. Whatcha askin for it?

If I bring it over when I have the clipons shipped here I can do $110. Which is cheaper than the gb previously held.

a Bike Monkey integrated tail light GB would be sweet, and thats a great price

I'm in on the tail light.

Choice of lens, or one variant only?

^Let me double check.

your undertail is super clean!!! makes me wish i didn't already have my hotbodies....i checked out your site and everything is awesome! i am going to be purchasing the tire hugger/swingarm cover....that is such a great idea....thank you so much for providing us with these mods that i have been searching for for over a year! it's about time someone got on it...

I am down for a BM integrated taillight and an undertail sectionsso what is the verdict
Posted via Mobile Device

UNertails still waiting on BM I will have in about 2 weeks

I have two gp seat cowls one is primered $55 Shipped and one black for $70 shipped. Looking for someone to try these bad boys out.

Which color black is it?

Which color black is it?

None. None more black.

http://www.collider.com/wp-content/image-base/Movies/S/Spinal_Tap/This%20is%20Spinal%20Tap%20movie%20image%20(4).jpg

2008 black

can you explain to me how the v6r makes 4.5 pound feet more torque then the ap exhaust? thanks

NM not ft lbs. When you do the math it comes out to about what the AP cranks out

thanks.guess i didnt look close enough

Hey Matt I sent you a PM about the sportisi Bodywork.

WINDSCREENS are now available $65 shipped. And I only have 8 left smoked only.

I have some adjustable levers for sale to. I bought them for a customer who then changed his mind. I just want my money back out of them. $90 Shipped They're silver with a hint of bronze. SOLD to UNTDAVID

Up forsale for a guinea pig. Windscreens in stock as well.

Are you going to have any hangars for sale? Has any body work come in?

Body work is coming with your tank cover. I have hangers for sale.

How much are the hangars and are they the black "ninja" ones?

$55 yup black ninja

Daytona Japan Brake pads. Any Body interested?

Price?

$55 shipped

Daytona Japan Brake pads. Any Body interested?

hmm tempting..

just to make sure, price is for both a set for the front and rear together, yes?

Let me double check that. Have a bunch of stuff going on hard to find up from down.

Kitaco clipons are now instock.

Any interest in a bolt on Steering damper. looking at the low $300 range (hyperpro and ohlins style)?

yes please!!!

I'm hoping to have a few samples in a week or two.

I'm hoping to have a few samples in a week or two.

On another subject. Any idea when the 2009 blue rear highers will be in?
Posted via Mobile Device

They are being shipped ocean freight as we speak

Let me double check that. Have a bunch of stuff going on hard to find up from down.

any update on this for the brake pads?

Totally forgot about the brake pads patrick. I will ask today.

Keep eyes peeled for the Sportisimoto Jet Kit. I am waiting on the copy of the dyno sheet. But showed gains over a DJ stage 2 kit throughout the entire range. Price will be in the $55-$65 Shipped price range. Includes 2 needles, Size 40 pilot jets, 5 sets of jets 98, 100, 102, and not sure yet two out of the following three 105,108,110.

Are those Keihin MJ sizes/equivalents? If so, you might want to replace the 98s with 96 or 112s, as the bike comes stock w/98 Keihins.

Sounds like a good deal to me. :)

Those are keihin sizes. I mistyped. The 98 isn't in the kit I just need to pick what sizes I want. probably be a 100, 102, 108, 110, 112 in the end

Here's the sheet. First run is DJ. Second run is Sportisimoto kit with stock main. Third is Sportisimoto kit with jetting.:thumbup: Bike had Best Lap (korean) exhaust Full system as well.

Sweat kit. The FP doesn't even comes with pilot jet. Keep us posted. :thumbup:

I may do an intro GB.

Sweat kit. The FP doesn't even comes with pilot jet. Keep us posted. :thumbup:

They dont? They say they do:

inc: main jets, pilots, Celmat30 needles, clips, shims, float bowl allen screws, etc.

I was gonna order zrx kit from them........ guess I wont now if they post wrong info.



Sounds like a good deal to me. :)

:iamwithstupid:

I have no clue what actually comes in their kit other than what is state on their site. Marc had offered to tune my bike for free for some publicity. But since I have my own kit coming out I think I just voided the offer.:thumbup:

They dont? They say they do:


:iamwithstupid:

man now you got me confused. I could have sworn there isn't a pilot jet but it has been a year ago...but man I really don't think there is one. I know I swapped out the main jets and needles and clips/washers...don't think I touched for float or pilot jets. Hmm...I also checked the "Jetting database" and no one ever mentioned anything about swapping out the pilot jets.

go dig out your box and look

i'm working this weekends..another town (4 hrs away)..arghh...why do you think I'm on the computer surfing the net like this :D

anyways, got another job in my home town. This is the last damn weekends away from home..(hopefully).

PS. let me PM KKim...he knows everything :D

good can I have your old job :D

not sure if you will leave the beautiful weather of Cali for hot & humid Texas..but by all means yes :D

hot and Humid about 112 degrees just like it is here

I need money. Then I want lots of stuff.

hey matt i am an ass pm your way

Undertail exhaust is getting really close. I should have good pictures today. I already got a couple but they are in a zip folder and I don't know how to put them up.

unzip them and put them up?

Thats not in my pay scale :p

Brat

wow, love the undertail exhaust. Looks like it has some crazy welding going on there. No pic of end pipe?

Should have them up today.

yippeee!!! can't wait to see more pics!

Go to bed dawn

i was just thinking the same thing...we must be the night owls :) don't worry...i won't lose sleep waiting for pics....:D

Interesting routing. Looks mighty close to the coolant tank and the hose coming out of it. I wonder what all that heat will do in that location... there's also no insulation on the fairing near there.

I like undertails for the sole reason that I think they look cool, but I'm constantly reminded of how a bike is a whole system with lots of pieces that interrelate. TANSTAAFL.

It'll be interesting to follow this.

Interesting routing. Looks mighty close to the coolant tank and the hose coming out of it. I wonder what all that heat will do in that location... there's also no insulation on the fairing near there.

I like undertails for the sole reason that I think they look cool, but I'm constantly reminded of how a bike is a whole system with lots of pieces that interrelate. TANSTAAFL.

It'll be interesting to follow this.

Ya I saw that and thought the same thing. You can pick up header tape (for car exhausts) wonder if that would help in this situation

Put me down for a swing arm cover and primed rear hugger. I'll do the painting myself. Thanks Matt.
Posted via Mobile Device

Matt, I noticed that all the bikes with a sportisi hugger and swingarm cover have rerouted the brake line up and over the outside of the cover. Is it possible, perhaps by drilling an appropriately sized hole, to instead install the cover so that the brake line continues to run down along the swingarm and thus remains hidden? I love the look of your cover/hugger combo but I think that the repositioning of the brake line makes it look a bit janky.

Your more than welcome to drill a hole. But the brake line holder still needs to come out.

Should have them up today.

It's today :)

looks like the undertail wont work with certain frame sliders..

With intutive it will shogun I don't have them infront of me so can't answer that.

Will it be cheaper if we don't care if the manifold is polished? All that is going to be visible is the under tail anyways

No polishing only costs me about $2

Its going to be about $499 retail. I'm going to do a gb 10 person minimum no exception or excuses $399. Still waiting on dyno and final tweaking. Going to be in CF.

That is dirt cheap for polishing....can I send you some stuff J/K the shipping would probably be as much as it would cost to get it done locally.

You know I'm in for the GB

Put me down for an undertail exhaust..... Can't wait for pics and dyno chart.

I will also be in for the exhaust GB....ztrack...do you have any huggers painted in the 2009 CP BLUE?

One left that will be for sale. the other has been spoken for.

One left that will be for sale. the other has been spoken for.

Sure hope that's mine:)
Posted via Mobile Device

yes matt

Matt.....the piping looks good.....do you have pics of the can and tail?!?!?!? :thumbup::thumbup::thumbup::thumbup::thumbup: :D

I will whenever bram get around to it.

The undertail is looking good. Just needs to be wrapped in CF before I release any pictures per Bram's request.

Looking at a possible late January. Depends on if we outsource the Muffler to Korea for manufacture.

Going to be in CF. Any plans for a ti can?

Its an eventual possibility but not a priority right now. Unlike Akra, yoshi, and other companies who make exhaust for other bikes we relie solely on the 250 market it is better to stick to one design and one make for the time being since we don't have sales from other bike styles to float the small scale ninja market.

Awesome. Thanks Matt and happy hollidays
Posted via Mobile Device

No Probs. everyone enjoy their holidays

So we dyno'd the exhaust with mixed results. We are looking for a stock bike to test it on rather than the race bike that we used since it is built for a different setup. This should yield better results and help in the final tweaking. We lost 1hp on the bike overall (from the high of 33.4hp) but at the same time improved the fuel mileage since we went from a 108 main jet to a 98 with a pod filter it is a decent compromise but still want to tweak for the best of both worlds. I'll keep you all updated.

I have a stock bike that you could use, where are you located?

So we dyno'd the exhaust with mixed results. We are looking for a stock bike to test it on rather than the race bike that we used since it is built for a different setup. This should yield better results and help in the final tweaking. We lost 1hp on the bike overall (from the high of 33.4hp) but at the same time improved the fuel mileage since we went from a 108 main jet to a 98 with a pod filter it is a decent compromise but still want to tweak for the best of both worlds. I'll keep you all updated.

California. Testing is going on overseas

No, problem, I'm in Ga anyway.

Take care.

Thanks for all the hours you guys are putting into this. After all is said and done my bike is going to be a keeper. Keep on making products for our little bikes
Posted via Mobile Device

I may post up a photo of the in progress can if bram will let me. I like showing the development as we go. but you may just get the final shot when its ready

How's the new shipment coming along?
Posted via Mobile Device

I got a nice little email the other day saying the container wasn't on the ship. ETA at LAX is the 17th. Your cf piece is being made now.

Was my piece in the missing container?? Not a big deal if it wasn't...starting to get the riding itch but no where near being close to being able to....we are getting more snow today

Ya it will be at my house by the 25th and in the mail on the 26th

Cool. Thanks again

Looks like someone is ripping off the paint scheme from the cyclone kit (or at least the pic on the main page of the site)

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320470530889&viewitem=

I have had an eye on these fairings since they first appeared - My main concern is the fit.

They come with all the plastic pieces....would be nice if you only had a frame and nothing else, but how many of thost pieces do we really need anyways.....and from the pics it looks like they are cheaply made....or cheaply painted

Those are motogp rip off schemes. JG they are race fairings and are intended for that purpose. They are streetable with modification. They line up preetty easily after figuring it out. I had to add a ureathane spacer on each side for the lower mounts. I also had to cut some out on the kickstand side so the stand wouldn't press the body work against the chain. And as with any hand laid fiberglass product there is always a slight variation between kits they are never exactly 100% spot on but come very close.
I literally bought the second kit ever made. I'm happy with it. And now that the fiber glass guys have about 2 dozen of these bad boys under their belt their quality (which was really good to begin with) and fitment is better than mine is.

Matt you talkin bout the sportismoto ones or the eBay ones that copied the paint scheme??
Posted via Mobile Device

I got a nice little email the other day saying the container wasn't on the ship. ETA at LAX is the 17th. Your cf piece is being made now.

Any eta of when the cf will be done and gets here? Thx
Posted via Mobile Device

pm me Jean. I should get the CF piece shipped to me this week

Jean here is your CF hugger piece

How much is that thing????

Jean here is your CF hugger piece

Wow. That's shiny :)
Posted via Mobile Device

I charged Jean what I had to pay for it. If more are to be produced I have to raise the cost a little. APX cost for sportisi set up with CF piece is going to be $275 Shipped.

Tha hugger looks VERY NICE.

that ebay kit does look nice.

That ebay kit :happy50::happy40::happy20::jaw::jumping40::rotflmao::rotflmao::rotflmao::rotflm ao:that ebay kit does look nice.

Any word on the new undertail exhaust? Any sneak pics?

No pics until it has been wrapped in CF. The adjusted prototype will be tested today or tomorrow.

OK time to choose. We either have to go with a design for low to mid range power or top end power. Just like with our other exhausts the VR6 is better for low to mid the VR is better on the top. I am waiting on the dyno sheets. The VRX is going to get you better mileage than other full systems either way and still make great hp numbers. But I need some input.

low to mid range.

OK time to choose. We either have to go with a design for low to mid range power or top end power. Just like with our other exhausts the VR6 is better for low to mid the VR is better on the top. I am waiting on the dyno sheets. The VRX is going to get you better mileage than other full systems either way and still make great hp numbers. But I need some input.

The correct answer is top end power.

I see both being good. But I still want to see the dyno sheets. Our other exhausts are super close overall. If both dynos are close its gonna be a coin flip.

I'd say low to mid as this is going to be a city only bike which might see 90 km/h less than once a month
Posted via Mobile Device

That is actually the one we are going to use. And it is still pretty good up top.

I personally would perfer top end, but if the difference is only minimal on the top end, than the mid range option would be best. What did the dyno say?

Waiting on the sheet. Should have it tonight

Still waiting on the sheets. We're trying one more pipe design to try to get the max out of the system. The system will require a header wrap near the coolant tank. I am debating on selling it with the exhaust at the $499 price or dropping the price to $475 so the customer has their choice of header wraps.

Matt, what about Jet Hot or someother ceramic coating. That should keep the heat in the pipe.
Posted via Mobile Device

its to close to even gamble but if the customer chooses they can do it. I don't have the ability to ceramic coat.

I'd sell the pipe with the header wrap if it needs it. Otherwise people will install it without the wrap then bitch when things start melting. Charge a few bucks more and save yourself some headaches.

I'd sell the pipe with the header wrap if it needs it. Otherwise people will install it without the wrap then bitch when things start melting. Charge a few bucks more and save yourself some headaches.


Ya that's what I'd think too....there's no one over there that will ceramic wrap?? I wouldn't worry about giving any options on the wrap just do it in one colour and there is no worry about it being put on, not put on right or any other issue that might come up, with the fairings on you won't be able to see the wrapped section anyways. The only thing I would do is wrap the majority of the pipe that is running inside the fairings that way you won't get any surprise issues down the road from the heat coming in contact in other areas that aren't so obvious, but I guess that is something that I could do once I get the pipe

Will any additional mods need to be made when adding the new exhaust - rejet kit? shim?
I too would add the wrap to the price.

On a stock bike there is a chance only a shim will be needed in most of the US. Since we went from a 108 to a 98 main jet with an open pod filter in Indonesia (typically they run high jetting in their climate). We will have a recommended jetting start point which owners can then tweak to their climate.

Needle jets anyone. First 1000 jet kits are almost done being assembled.

Any word on those test kits? Or will those kits be part of the first 1000 kits?

They will be part of it. The rest of the kits should be ready next week. But I needed some stuff shipped asap so I will have the testers needles here but I will be waiting on the rest of the kits.

The Newest undertail to be available in the states in a few months. Comes with a built in tail light.

quit teasing. exhaust pics

When I saw the notification in my email I thought you were talking about the undertail exhaust coming with a tail light

i like the looks of that undertail....i broke the thin piece that goes over the top of my tail light on my hotbodies undetail...actually had a feeling it would happen since it is so thin....been glueing and fiberglassing to fix it....what a pain.......

Love that undertail since day one. What's going to be the price?The Newest undertail to be available in the states in a few months. Comes with a built in tail light.

BTW Matt, when are you planning to get the tester needle jet kits? I'll be ordering a Yoshi CF full exhaust between tomorrow and monday and I was wondering if I could qualify for the needle jet kits. I ask because I have to rejet since I'm getting a new exhaust. the same time I'll be ordering the K&N pod filter and do all the mod from the DIY.

Thanks in advance

The needles I have coming in next week for the tester batch. I'm waiting for the full jet kits before my testers get theirs though.

The needle shipment comes in with the hugger batch due to be received this week? How confidence are we in receiving the batch? Been delayed for awhile..
Posted via Mobile Device

Needle Shipment is due in on the 29th. Huggers are clearing US customs right now. The Needle Shipment was only delayed about 4 days. The Huggers I was pissed about because I should have had them around the 10th.

*cough* pics of undertail exhaust *cough*

lol

Cool so it's on us ground. How long does it usually take to clear custome and for you to receive it? Hope all is well.
Posted via Mobile Device

Generally 3 - 5 days. I am waiting on a call today to go get it. But I think I will get it tomorrow.

Generally 3 - 5 days. I am waiting on a call today to go get it. But I think I will get it tomorrow.

Does that mean it is time for me to get excited too??? Just had a blizzard earlier this week and finally getting the roads clear....not even close to bike weather...but I am glad I drive a 4x4

Yup I finally get to play with your tail. wait that didn't sound right lol. I am interested to see the actual finish on the duc tail.

Yup I finally get to play with your tail. wait that didn't sound right lol. I am interested to see the actual finish on the duc tail.

Remember that my tail is for exit only so don't make any new holes or shove anything into the existing holes that are larger than the original dimensions....actually don't shove anything into any existing holes

WTF :eek:

Yup I finally get to play with your tail. wait that didn't sound right lol. I am interested to see the actual finish on the duc tail.

Your SCREW :jumping20::jumping40:Remember that my tail is for exit only so don't make any new holes or shove anything into the existing holes that are larger than the original dimensions....actually don't shove anything into any existing holes

The Newest undertail to be available in the states in a few months. Comes with a built in tail light.

that looks hot.

Generally 3 - 5 days. I am waiting on a call today to go get it. But I think I will get it tomorrow.

Are they in matt? Can wait to get them
Posted via Mobile Device

hey matt I have an off ?? when stuff you order goes to custom in San Francisco how long dose it normally take to get to you. I have been waiting for something that I ordered from Japan that hit customs on the 24th

Customs can take up to a week and a half to clear.


Huggers are in (09 blue sold out already). Undertails too. Rob your tail is sitting on my couch.

so which one you have in stock?

Is it the new undertails with light?

New undertails with lights aren't available yet.

Huggers: Kawi Green, 08 black, 08 red, 08 blue
Under tails: Daytona blue, CPB, Kawi green, 08 Red, 08 Black

any discount on the kitaco's?

Nope. And I just sold the last set. I need to order some more.

Matt.....do you have a photo of the CPB undertail????

Yup I finally get to play with your[, divingtigger's,] tail. wait that didn't sound right lol. I am interested to see the actual finish on the duc tail.

Any luck finding me a CPB Ducati ducktail in the near future? :)

I've been idle in the forums lately but I am still wanting to purchase it along with a CPB hugger and an exhaust hanger from you. :thumbup:

Matt, will the new undertail exhaust work with either the original Sportisimoto undertail or the new one?

Woot!!! Finally in. How is the CF hugger looks in person Matt?
Posted via Mobile Device

Awesome, Been waiting for the Undertail for a while. I cant wait to get it installed with the integrated tail light that been sitting patiently on my work bench.

Matt, will the new undertail exhaust work with either the original Sportisimoto undertail or the new one?

undertail exhaust will work with standard udnertail, or sportisimoto undertail or the new one

I'll have better pictures for you tomorrow Jean. CPB under tail tomorrow. Ryan 08 or 09 red? I only have 08 until next shipment. CZroe I have not checked on he blue duc tail for you yet. I forgot. Asking bram now.

Rob your tail is sitting on my couch.

I wish it was.... it was -28 degrees here this morning and that is without the wind chill

I'll have better pictures for you tomorrow Jean. CPB under tail tomorrow. Ryan 08 or 09 red? I only have 08 until next shipment. CZroe I have not checked on he blue duc tail for you yet. I forgot. Asking bram now.

08 red

Got one for you pm me. Rob you pm me too.