So, does anybody have any suggestions for me to get more leg room? I see the 250r guys have something. Im 6'1" and it is kinda cramped...

I know there are a few different types of footpeg lowerers and extenders, I'm just not sure where to find them. Search around a bit and you should be able to find them.

One guy used Buell pegs. http://www.ninjette.org/forums/showthread.php?t=17572&highlight=buell+pegs

But it was on a new-gen

I'd try to raise the seat, not lower the pegs.

Bead riders, sheepskin, Airhawks will all give you a 1/2 inch to an inch more room.

Here's a link from another board...there may be some ideas in there.

http://faq.ninja250.org/wiki/Bodywork_%26_Frame

any other suggestions???

I have the same problem. I only see about 1.5 to 2" of room to move down.

Might need to make different mounts for the pegs and controls.

You might need to do both, move the seat height up with a custom seat or seat pad and move the pegs down and back with a rearset to get much of a noticeable difference. I believe woodcraft makes rearsets that will give you more room.

I believe woodcraft makes rearsets that will give you more room.

They do for the 08-09..

Anybody look at these before??

http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=495476&store=Main&catId=&productId=p495473&leafCatId=&mmyId=1433