t-cab12
April 5th, 2018, 01:26 PM
what mods or racks do y'all recommend for adding a trunk? I have an '08:confused:
View Full Version : adding a trunk t-cab12 April 5th, 2018, 01:26 PM what mods or racks do y'all recommend for adding a trunk? I have an '08:confused: taz April 6th, 2018, 07:30 AM https://www.ventura-mca.com/Ninja-250R-FI Kevin1956 April 6th, 2018, 08:42 PM t-cab12 : I have the S-W Motech rack from Twisted Throttle. Pricey, but worth it. It's a very high quality piece, plus it looks good when not in use. The only other rack option for the 250 is the Ventura rack. Personally I think the Ventura is pretty ugly. It also requires clamps to mount a topcase bracket, which is something I would avoid doing. http://www.twistedthrottle.com/sw-motech-alu-rack-toprack-kawasaki-ninja-250-08 Kevin1956 April 6th, 2018, 09:42 PM t-cab12 : A word of advice. My topcase is 28 liters, and my Shoei helmet barely fits inside. There's absolutely no room in it for anything else. You'll probably want one with a 35 to 40 liter capacity. Ram Jet April 7th, 2018, 04:52 AM what mods or racks do y'all recommend for adding a trunk? I have an '08:confused: How bout . . . Bill t-cab12 April 12th, 2018, 07:13 AM where are yall finding the frame piece to connect the rack to? Kevin1956 April 12th, 2018, 10:13 AM t-cab12 Everything is included, the rails, rack, hardware. t-cab12 April 12th, 2018, 10:34 AM t-cab12 Everything is included, the rails, rack, hardware. THANK YOU! The second picture was deceiving only showing the rack. EAK November 24th, 2019, 05:00 PM I have a 2002 ninjette and the S-W Motech rack. I attached a 56 qt. Plano box to the rack. I added a 3/8” thick plastic cutting board to the inside of the box to provide rigidity. Bolts go through rack, box, and plastic cutting board. This has enough room for helmet, jacket, gloves, etc. when parked. I can fit 2 grocery bags, or a case of wine and a grocery bag after shopping. (Try to bring home a case of wine home in a backpack!) EAK 4641846419 Ram Jet November 24th, 2019, 07:28 PM I have a 2002 ninjette and the S-W Motech rack. I attached a 56 qt. Plano box to the rack. I added a 3/8” thick plastic cutting board to the inside of the box to provide rigidity. Bolts go through rack, box, and plastic cutting board. This has enough room for helmet, jacket, gloves, etc. when parked. I can fit 2 grocery bags, or a case of wine and a grocery bag after shopping. (Try to bring home a case of wine home in a backpack!) EAK 4641846419 Not real "sporty" but super practical. Nice job! Bill MrAtom November 25th, 2019, 11:06 AM I have a spare seat that's made of gorilla tape and faith. I drilled a few holes in it and bolted on a sturdy HDPE plastic bin with a lid. Works great! EAK November 25th, 2019, 06:50 PM Not real "sporty" but super practical. Nice job! Bill :rotflmao: Thanks! Yes not very "sporty" at all. I forgot to include "It's kind of cheesy looking", before hitting the post button last night. It does get the job done though. Eric |
|