57qMDj-vy5I

:eek:

how cool is that?

but how long will the motor last
Posted via Mobile Device

One mile is all I need . Where can I get the KIT ?I mean it I will buy the kit ,the bike what ever .

One mile is all I need . Where can I get the KIT ?I mean it I will buy the kit ,the bike what ever .

http://www.tanshaya.com/

Nice nice, I keep seeing more and more of these out there!

Very cool, but the problem we have here is the carb version. FI is much easier to tune properly.

edit: is this a carb version?

Very cool, but the problem we have here is the carb version. FI is much easier to tune properly.

edit: is this a carb version?

It doesn't have a fuel gauge so it looks to be a fuel injected bike.

is this a real kit or a one off
Posted via Mobile Device

is this a real kit or a one off
Posted via Mobile Device

Apparently a kit is now available.

http://tanshaya.com/wpj/wp-content/uploads/2010/05/eacdf1ab9a83dabb23945e36acbcb71e.jpg

Puts a whole new meaning to the answer to the oft asked question: What is it? -- "It's a 250" ;)

Even with the turbo set up, would the front actually pop up because of the power??

It really depends on the power, and the surge of power it has when it hits boost.

I'd need to see a dyno to give me an idea on whether or not it would.


A Suzuki GS500 makes just over 40hp or so. It can't pull the wheel off the ground without some clutch work. It would be easier though.

http://www.tanshaya.com/
The web page is in Japanese .
I got into some of the photos .. The system looks very good. It looks like it is still a one off at this stage.

Even with the turbo set up, would the front actually pop up because of the power??

I've done wheelies on race starts with a 30hp 250. With 45hp it would be hard to get off the line quickly without pulling a wheelie.

I've seen bartlow who is the johnny on the spot in race start pull the wheel off the ground in 1st and 2nd on a start.

Even with the turbo set up, would the front actually pop up because of the power??

Well, they extended the swing arm as if to minimize it.

Interesting to say the least.

I've done wheelies on race starts with a 30hp 250. With 45hp it would be hard to get off the line quickly without pulling a wheelie.

So how do you take off if you don't mind me asking? :p

What revs you hold it at?