sudapuff
October 4th, 2010, 08:47 PM
I just installed some Turn signal mirrors and decided to write up how it did it and see what you guys think.... here is the finished product first
http://lh3.ggpht.com/_8GbuXOR7zac/TKqarB0whFI/AAAAAAAAAFA/mwfolF9N2kI/s640/100_2103.JPG
I go the mirrors off eBay and since they are "Universal fit" naturally they don't fit the bike at all. i decided to keep the mounts the the old mirrors had and attach the new mirrors to them.
I started by cutting the old mirror right after the swivel
http://lh6.ggpht.com/_8GbuXOR7zac/TKqZH-QYVVI/AAAAAAAAAEY/qQxJdAWLX3s/s640/100_2085.JPG
I then drilled out the center of the old mount
http://lh4.ggpht.com/_8GbuXOR7zac/TKqZIHoJIoI/AAAAAAAAAEc/Qz2Aa_JQmHY/s640/100_2087.JPG
next i removed the swivel on the new mirrors
http://lh4.ggpht.com/_8GbuXOR7zac/TKqZInt3ikI/AAAAAAAAAEo/R3KOwMWqYOU/s640/100_2090.JPG
then cut off the the rounded point of attachment of the new mirror
http://lh6.ggpht.com/_8GbuXOR7zac/TKqaquvlqqI/AAAAAAAAAE0/8OnIEWP2P8U/s512/100_2091.JPG
next i used epoxy to glue the new mirror in the old base. i used a heat gun to soften the plastic of the base and taper it to the new mirror so i looked like it was suppose to be there.
http://lh5.ggpht.com/_8GbuXOR7zac/TKqe5ZwFBEI/AAAAAAAAAFQ/VbdgzLuvHPI/s640/100_2093.JPG
to get the wire through the faring i drilled a small hole
http://lh6.ggpht.com/_8GbuXOR7zac/TKqaqz8wBAI/AAAAAAAAAE8/3rXvpZ-CEbA/s512/100_2095.JPG
here what the mirror looks like up close on the bike
http://lh5.ggpht.com/_8GbuXOR7zac/TKqarhIkQRI/AAAAAAAAAFE/IwYD_vqoeIU/s640/100_2104.JPG
...Let me know what you think
http://lh3.ggpht.com/_8GbuXOR7zac/TKqarB0whFI/AAAAAAAAAFA/mwfolF9N2kI/s640/100_2103.JPG
I go the mirrors off eBay and since they are "Universal fit" naturally they don't fit the bike at all. i decided to keep the mounts the the old mirrors had and attach the new mirrors to them.
I started by cutting the old mirror right after the swivel
http://lh6.ggpht.com/_8GbuXOR7zac/TKqZH-QYVVI/AAAAAAAAAEY/qQxJdAWLX3s/s640/100_2085.JPG
I then drilled out the center of the old mount
http://lh4.ggpht.com/_8GbuXOR7zac/TKqZIHoJIoI/AAAAAAAAAEc/Qz2Aa_JQmHY/s640/100_2087.JPG
next i removed the swivel on the new mirrors
http://lh4.ggpht.com/_8GbuXOR7zac/TKqZInt3ikI/AAAAAAAAAEo/R3KOwMWqYOU/s640/100_2090.JPG
then cut off the the rounded point of attachment of the new mirror
http://lh6.ggpht.com/_8GbuXOR7zac/TKqaquvlqqI/AAAAAAAAAE0/8OnIEWP2P8U/s512/100_2091.JPG
next i used epoxy to glue the new mirror in the old base. i used a heat gun to soften the plastic of the base and taper it to the new mirror so i looked like it was suppose to be there.
http://lh5.ggpht.com/_8GbuXOR7zac/TKqe5ZwFBEI/AAAAAAAAAFQ/VbdgzLuvHPI/s640/100_2093.JPG
to get the wire through the faring i drilled a small hole
http://lh6.ggpht.com/_8GbuXOR7zac/TKqaqz8wBAI/AAAAAAAAAE8/3rXvpZ-CEbA/s512/100_2095.JPG
here what the mirror looks like up close on the bike
http://lh5.ggpht.com/_8GbuXOR7zac/TKqarhIkQRI/AAAAAAAAAFE/IwYD_vqoeIU/s640/100_2104.JPG
...Let me know what you think