View Full Version : Um... Yea...
caps March 21st, 2012, 07:44 AM It already had some slight loving from the previous owner.
2Bros Carbin Fiber Slip On
K&N Filter
Frame sliders
Bar End Sliders
Rear Spools
Custom Fender Eliminator
Scorpion Alarm with:
2 Way Pager
Tilt Sensor
Proximity Sensor
And the Tank Pad if you count it.
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/DSCN1951.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/DSCN1968.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/DSCN1966.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/DSCN1944.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/DSC_0177.jpg
And I'm still keeping my scooter.
EthioKnight March 21st, 2012, 07:56 AM Jesus H Christ! That thing is a monster and if I were to chance on it while riding my ninjette...I'd make sure to park out of sight to preserve whatever dignity my 'jette has. Damn!
CZroe March 21st, 2012, 08:06 AM Don't call our bikes "scooters" just because you're riding that MONSTER! ;)
CC Cowboy March 21st, 2012, 08:52 AM Is that a Chevelle with those Cragers? Maybe 68 or 69?
Cazper March 21st, 2012, 05:20 PM Now that's what I'm talkin' about!!! That's exactly my plan when I return from deployment... except the 2011 green ZX-14!!! Really clean... plan on doing anything to her?
jmgrande March 21st, 2012, 05:25 PM Thats awesome! And it looks sick with those dual two bros. Ride safe and report back how the jump from a 250 to 1400 SS is. That's a serious bike!
choneofakind March 21st, 2012, 05:36 PM How much does that thing weigh?? like 600 lbs?? :laugh:
saxnbass March 21st, 2012, 06:22 PM You went from a 250 twin to a 1400 I4? Holy **** DUDE!
Jono March 21st, 2012, 06:29 PM THAT THING IS HUGE!!!!!! I would not feel comfortable riding that thing. Enjoy that beast!
thurt88 March 21st, 2012, 06:36 PM Sweet Jesus. Congrats, sexy bike. :thumbup:
nickjpass March 21st, 2012, 06:56 PM Haha nice! Post some videos :)
caps March 22nd, 2012, 06:12 AM Jesus H Christ! That thing is a monster and if I were to chance on it while riding my ninjette...I'd make sure to park out of sight to preserve whatever dignity my 'jette has. Damn!
My ninjette is still proud!
Don't call our bikes "scooters" just because you're riding that MONSTER! ;)
I call all bikes scooters
Is that a Chevelle with those Cragers? Maybe 68 or 69?
69
How much does that thing weigh?? like 600 lbs?? :laugh:
555 wet weight. What does your ninjette weight?
250rr March 22nd, 2012, 07:20 AM Actually, that's surprisingly svelte, considering the size of the engine.
caps March 22nd, 2012, 08:12 AM Actually, that's surprisingly svelte, considering the size of the engine.
Yea it really is.
Also, I'm going to update the first post with the mods it has already.
Skippii March 22nd, 2012, 08:13 AM You skipped a step.
Posted via Mobile Device
choneofakind March 22nd, 2012, 08:17 AM 555 wet weight. What does your ninjette weight?
about 350 wet, minus the weight of my stock exhaust. :)
Skippii March 22nd, 2012, 08:18 AM Does the 555 include the stock or TB exhaust? Is there a big difference between them in weight?
Posted via Mobile Device
caps March 22nd, 2012, 08:22 AM Actually, that's surprisingly svelte, considering the size of the engine.
And the 200HP (to be fair it's only about 172HP/105TQ at the wheel)
Does the 555 include the stock or TB exhaust? Is there a big difference between them in weight?
Posted via Mobile Device
Stock. The weight difference is supposedly about 28lbs, but I haven't weighed it.
about 350 wet, minus the weight of my stock exhaust. :)
And a whopping 27HP :-p
You skipped a step.
Posted via Mobile Device
Nope. I have a couple toys and have spend a large amount of time on friends bikes that range from other 250's to a 308HP (at the wheel) Busa to an 1800cc Goldwing (power reverse will spoil you).
choneofakind March 22nd, 2012, 08:28 AM And a whopping 27HP :-p
aaaaand? :p
it's not size that matters. It's all about how you use it ;) sometimes, taking a long time to get where you want to take people is a good thing :lol:
Mocha Man March 22nd, 2012, 08:52 AM Nice cage. Wait...holy crap, that's a bike! Might as well be a cage it's so big :p
Cazper March 22nd, 2012, 01:10 PM ...it's not size that matters. It's all about how you use it ;) ...
That's usually what those who are lacking in size say to make themselves feel better :doh:
cbdallas March 22nd, 2012, 01:17 PM Don't think I'd want to own one, because I'd surely lose my license, but I'd love to know what it feels like to have that much power on 2 wheels. It doesn't look like it'd be as prone to lifting the front wheel as a ZX6R seems to be...is that the case?
choneofakind March 22nd, 2012, 01:39 PM That's usually what those who are lacking in size say to make themselves feel better :doh:
...says another man on a puny litte 250... pssh!
caps March 22nd, 2012, 02:24 PM aaaaand? :p
it's not size that matters. It's all about how you use it ;) sometimes, taking a long time to get where you want to take people is a good thing :lol:
Are you going to give me a "motion of the ocean" speech next?
Nice cage. Wait...holy crap, that's a bike! Might as well be a cage it's so big :p
Lol, it's not the smallest bike in the world.
Don't think I'd want to own one, because I'd surely lose my license, but I'd love to know what it feels like to have that much power on 2 wheels. It doesn't look like it'd be as prone to lifting the front wheel as a ZX6R seems to be...is that the case?
It will lift 1st-3rd on its own power at the stock length. I have been thinking about an extended swing arm, but I'm honestly not sure about changing anything till I have a couple thousand miles on it.
Cazper March 22nd, 2012, 05:21 PM ...says another man on a puny litte 250... pssh!
lol... true... however, by this time next year I will be sportin' a 2011 SE ZX-14 :thumbup:
besides, I really only said it for fun ;)
choneofakind March 22nd, 2012, 07:37 PM I know :) I kid too. A little.
Skippii March 23rd, 2012, 01:24 AM I have been thinking about an extended swing arm,
I just threw up in my mouth a little when I read that. :(
saxnbass March 23rd, 2012, 08:00 AM I have been thinking about an extended swing arm
No no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no no
TLDR:
umDr0mPuyQc
caps March 23rd, 2012, 08:06 AM like so
http://www.kawiforums.com/attachments/zx-14/35517d1282772336-post-pics-your-zx14-naples1.jpg
saxnbass March 23rd, 2012, 08:11 AM like so
http://www.kawiforums.com/attachments/zx-14/35517d1282772336-post-pics-your-zx14-naples1.jpg
umDr0mPuyQc
cbdallas March 23rd, 2012, 08:17 AM Yeesh.... I think I'd rather just be careful not to do wheelies. That picture reminds me of when people convert exotic sports cars into limos. Your bike is gorgeous...please leave it gorgeous.
caps March 23rd, 2012, 08:27 AM Lol, I'm not messing with anything for a couple thousand miles anyway.
csmith12 March 23rd, 2012, 09:07 AM Look at the bike pic while playing this;
qgvd9-R8HoA
greg737 March 23rd, 2012, 09:15 AM Nothing screams "parking lot poseur" like an extended swingarm.
And "yea" is an expression of excitement, synonymous with (and rhymes with) hooray, means something like, "yea!, we get icecream!" While "yeah" is an expression of agreement; nothing rhymes with it, but it is commonly used in the expression "Hell, yeah!" and means something like, "yes, I agree".
choneofakind March 23rd, 2012, 10:29 AM ^^ :lol: Greg just give up before you start losing hair over grammar corrections! :laugh:
etiainen March 23rd, 2012, 10:49 AM Those headlights make it look like the Collector General.
Yes, I just pulled a Mass Effect 2 reference.
For those who don't play, here is a pic:
http://images1.wikia.nocookie.net/__cb20100724160207/masseffect/images/0/04/Me2harbinger.png
I rode one, and decided I'd never buy one, it just seems so pointlessly overpowered, I didn't even get to shift at all..whooop 2nd gear? It's also heavy, and looks like an alien bug mixed with Reaper technology.
Jono March 25th, 2012, 07:02 PM I found this cool pic... thought I'd share it with you.
http://4.bp.blogspot.com/-_KcftBE0GAM/T2llgi_qUZI/AAAAAAAAxAY/AB3F06HBiPY/s1600/img_1154.jpg
caps March 25th, 2012, 07:28 PM nice, the original owner actually took this to the Tail
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/DAV_1388.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/DAV_1387.jpg
And today I adjusted the alarm, cleaned/lubed the air filter/chain and setup the front suspension. Tomorrow I will do the rear suspension :)
choneofakind March 25th, 2012, 07:33 PM Good to see a pair of ZX14's ridden like a sport bike and not just a drag bike! :thumbup:
caps as much as I was teasing earlier, take good care of it, and be careful, just as always :)
Cazper March 26th, 2012, 12:04 AM Man it's good to see the 14 leaned over so much... too many of my friends have tried to convince me that it won't perform in the corners... obviously that's not true :thumbup:
Reddoak March 26th, 2012, 07:33 PM Caps, you are a grade "A" idiot.
You couldn't pay me enough to climb on a deathtrap like that.
:D
caps March 26th, 2012, 07:47 PM :rotflmao::rotflmao:
I KNEW I should have taken a video of you on it today!
For everyone else who is currently in the dark, he drove from Orlando to Tampa today and drove my bike a whopping 200 feet :thumbup:
caps March 26th, 2012, 07:48 PM And you know you loved it! That thing is a monster, but it's SO FRIGGIN SMOOTH!
caps March 26th, 2012, 07:54 PM Good to see a pair of ZX14's ridden like a sport bike and not just a drag bike! :thumbup:
caps as much as I was teasing earlier, take good care of it, and be careful, just as always :)
I always do!
Man it's good to see the 14 leaned over so much... too many of my friends have tried to convince me that it won't perform in the corners... obviously that's not true :thumbup:
It's a common improper paradigm among sport bike riders. If you have ever seen a 14 or busa in person you would understand where the general thought process started since they are CONSIDERABLY longer/larger then most sport bikes. But they are surprisingly nimble/agile for such a large two-wheeled vehicle.
They do however require a certain... Finesse (manhandling) to get them to lean as far as most sport bikes are pushed in similar situations.
Gurk March 26th, 2012, 07:56 PM that's one FUGLY bike :D sorry that was mean. but yeah i've never been impressed by the design. But congrats regardless. Upgrading bikes always makes u warm and fuzzy inside!
and Dustin, cmon dude just get a zx10r. you'll love it WAY MORE if you ever track.
caps March 26th, 2012, 08:03 PM Yea it's not the prettiest thing I the world to some people. I was gonna get an R6 till I decided I wanted a real mans bike :p
But seriously, the wife wants either an R6 or a CBR600
Reddoak March 26th, 2012, 08:23 PM :rotflmao::rotflmao:
I KNEW I should have taken a video of you on it today!
For everyone else who is currently in the dark, he drove from Orlando to Tampa today and drove my bike a whopping 200 feet :thumbup:
Let's put this in context, however...
I was working, and picking up equipment (in a company truck, on the clock) from a location just under 7 miles away... and I had a tire for caps. And I had no gear with me... So yeah, just a quick ride up and down his driveway. I'm not going for a 45 minute ride on your 200 hp deathcycle-14 all squid-ed up.
I would have gone over 15 MPH, but one of your neighbors was walking his dog, and the dog was already wigging out.
For what it's worth, Ninjette riders, at 10 MPH the ZX-14 is heavy, but well balanced enough that it felt very comfortable maneuvering around tight areas. Even for a 5'7" guy like me, the bike was low enough to easily handle, and the riding position, while a little less upright than a 250, was nowhere near as cramped as a ZX-6r. It's not really my style, but it's still a pretty nice bike. It would be a fun bike, but I would be more likely to climb onto my ER, just because it's more comfortable for the riding I do.
Cazper March 26th, 2012, 08:35 PM ...If you have ever seen a 14 or busa in person you would understand where the general thought process started...
I've had the pleasure of riding both the 2011 and the 2012 at Kawasaki's "Ticket to Ride" event and the International Motorcycle Show in Longbeach... it's what made me fall in love with them!!! It's everything that I want and need in a bike... trust me... I'm sold :thumbup:
and Dustin, cmon dude just get a zx10r. you'll love it WAY MORE if you ever track.
Although the ZX-10R would be awesome on the track... it doesn't fill my real world needs. It's just not as comfortable as the 14 and to an old guy like me :rolleyes: that's pretty important :lol:
choneofakind March 26th, 2012, 09:16 PM It's just not as comfortable as the 14 and to an old guy like me :rolleyes: that's pretty important :lol:
*cough* Kawasaki Concourse for the old guy *cough*
:lol:
Cazper March 26th, 2012, 09:26 PM *cough* Kawasaki Concourse for the old guy *cough* :lol:
Okay... let's compare...
http://senandung.net/wp-content/uploads/2011/10/picture-2011-kawasaki-concours-14-abs-stand.jpg
http://image.sportrider.com/f//wallpapers/146_1105_2011_kawasaki_zx14_wallpaper/32863150%2Bw800%2Bh600%2Bst0/146_1105%2B2011-kawasaki-zx-14-wallpaper-10%2B.jpg
I'm actually only 34... (15 of which has been in the Marine Corps so it's aged me a little further :lol:) I'll stick to the 2nd one... at least while I still can :thumbup:
and I know... you were only teasing :rolleyes: :lol:
choneofakind March 26th, 2012, 09:32 PM point taken. grudgingly... :p
Gurk March 26th, 2012, 10:04 PM Yea it's not the prettiest thing I the world to some people. I was gonna get an R6 till I decided I wanted a real mans bike :p
But seriously, the wife wants either an R6 or a CBR600
Love my girly bike ;) Your wife has good taste! Heheh
caps March 27th, 2012, 04:42 AM Love my girly bike ;) Your wife has good taste! Heheh
Yes, yes she does :)
caps March 28th, 2012, 08:48 PM Can't get to know her til she's NEKID!
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/9149b8a4.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/9624dfc8.jpg
I had a couple things i wanted to adjust, and figured why not snap a picture or two.
Cazper March 31st, 2012, 06:48 PM Thanks for sharing the bike porn :drool:
Whiskey March 31st, 2012, 07:03 PM that's a real cracker & they go like a rocket, but FFS don't molest it with an extended swingarm
Sinister April 4th, 2012, 12:01 AM Big :thumbup: for the 14. 3rd season on mine and still loving it.
caps May 4th, 2012, 02:53 PM http://i243.photobucket.com/albums/ff24/capsisking/75d4bbbd.jpg
http://i243.photobucket.com/albums/ff24/capsisking/5bff117d.jpg
http://i243.photobucket.com/albums/ff24/capsisking/7351c1c5.jpg
http://i243.photobucket.com/albums/ff24/capsisking/5707201c.jpg
http://i243.photobucket.com/albums/ff24/capsisking/96f31c42.jpg
I really should get a 636 for a daily driver
caps May 4th, 2012, 03:01 PM and 250's don't do this
http://i243.photobucket.com/albums/ff24/capsisking/Untitled-1.jpg
http://i243.photobucket.com/albums/ff24/capsisking/375fb152.jpg
http://i243.photobucket.com/albums/ff24/capsisking/46397936.jpg
http://i243.photobucket.com/albums/ff24/capsisking/b09b825f.jpg
http://i243.photobucket.com/albums/ff24/capsisking/Untitled-2.jpg
Reddoak May 6th, 2012, 08:16 PM Sure they do. You just need a little skill.
And an 80 pound rider.
caps May 7th, 2012, 04:53 AM Sure they do. You just need a little skill.
And an 80 pound rider.
And a 100shot of nitrous.... It actually caught me by surprise, I gave it a *bit* of gas and there was some fine sand in the road. It actually broke loose at around 7K rpm.
This is why people shouldn't start on super sports. If I would have upgraded when I told you I was ready I would have ran this thing into a lake by now.
caps August 28th, 2012, 12:23 PM A little refresher for you guys :thumbup:
http://i243.photobucket.com/albums/ff24/capsisking/null-4.jpg
http://i243.photobucket.com/albums/ff24/capsisking/null-3.jpg
http://i243.photobucket.com/albums/ff24/capsisking/null-2.jpg
http://i243.photobucket.com/albums/ff24/capsisking/null-1.jpg
http://i243.photobucket.com/albums/ff24/capsisking/null.jpg
Gurk August 28th, 2012, 12:51 PM your licence plate block is hitler's mustache... or a black ghost from pac-man!
csmith12 August 28th, 2012, 01:38 PM your licence plate block is hitler's mustache... or a black ghost from pac-man!
lol http://www.nme.com/boards/images/smilies/werd.gif
choneofakind August 28th, 2012, 03:48 PM Hmmm I like that CBR :) still trying to warm up to the 14...
rjones91 August 29th, 2012, 12:27 PM Saw a lady (looks to be in her middle 40s) riding one of these with a bad ass side car attached. Was a nice navy blue paint job, I was drooling at it stopped at the stop light. Wish I could have taken a pic but I would look ridiculous trying to whip out my cell and catch a pic on my bike.
Nice bike though...tooooo big and too powerful for me.
psych0hans August 30th, 2012, 07:44 PM Yea it's not the prettiest thing I the world to some people. I was gonna get an R6 till I decided I wanted a real mans bike :p
But seriously, the wife wants either an R6 or a CBR600
If you wanted a "real" mans bike, why not this one? :p
http://1.bp.blogspot.com/_nsfFCnwGVlc/TJpxXeBrVwI/AAAAAAAACR4/MdOT4gI3B-8/s640/BossHossRad.JPG
Reddoak September 1st, 2012, 06:42 PM If you wanted a "real" mans bike, why not this one? :p
http://1.bp.blogspot.com/_nsfFCnwGVlc/TJpxXeBrVwI/AAAAAAAACR4/MdOT4gI3B-8/s640/BossHossRad.JPG
That a Boss Hoss? That dude must be 5 feet even...
Cazper September 6th, 2012, 12:12 AM Moar pics of the 14!!!! :drool: I'm getting so ansy trying to wait to buy mine... if only I would have been deployed longer I would have made enough money to have it now... instead... I have to wait until I get my tax return now :doh: I will have one!!!!
Reddoak October 12th, 2012, 08:09 PM Time for an update...
Gurk October 13th, 2012, 11:21 PM I was passing this zx14 guy on the outside on every session 2 track days ago. It was fun...
Then I got passed by a 250 :D
Gurk October 13th, 2012, 11:22 PM zx14 guy was nice though. he wasn't gunning on straights just to block you on turns. he was letting people pass on straights and riding at his own speed. kudos!
caps April 16th, 2013, 06:52 AM Damn this thing hasn't been updated in a while.
caps April 16th, 2013, 06:53 AM I'm going to dump a **** load of pictures in here and let you guys figure it out.
caps April 16th, 2013, 07:05 AM Well as many of you know on 10-11-12 I had a slight misunderstanding with a guard rail. It won. Anyway my knee is almost closed so I am starting to put the scooter back together. Money is pretty tight with all the racking up medical bills, but I'm slowly making progress. Foe those of you who have never ridden with me this is what it USED to look like;
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/DSC_0175.jpg
and this is what I'm working with now;
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/542804_10151506232459196_1424622077_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/3729_10151506232779196_660315056_n.jpg
I've ordered all of the parts I need to at least start it. Hopefully they will arrive by this coming weekend and I will be able to see if I need to put this off for a while (If I have engine problems), or if I can keep going one piece at a time. The first thing I did was pick up a full OEM exhaust since my headers were tweaked and I found a full system on craigslist for DIRT cheap. It is off a 2010 which has a different header then the 06/07 mine had. So first thing I had to do was cut open the new header to remove the catalytic converter that mine didn't have.
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_152047.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_152049.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_152044.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_152141.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_152146.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_152228.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_152644.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_152647.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_152822.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_161255.jpg
Now that is sitting at Burkette's house curing for the next day or two. So when the new (i <3 salvage yards) lower radiator hose comes in I will pick the header up. Then all I have to do to see if it cranks is;
Paint the header
Mount the new header
Mount the OEM slip ons
Mount the radiator
Install the radiator plumping
Pray
Attempt to start it
I also REALLY don't want to paint this thing (I hate painting, and I can't imagine it being easy with all the curves), so I have been playing around with a couple ideas;
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_100449.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_100458.jpg
http://i243.photobucket.com/albums/ff24/capsisking/ZX-14/20121215_100503.jpg
But nothing is set in stone yet. I also picked up a TON of OEM plastics, so I have a second set of almost every fairing, and triples of the tail.
Cylinder 1
http://sphotos-b.xx.fbcdn.net/hphotos-snc6/184417_10151611918504196_1772833458_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-prn1/46466_10151611918889196_703023696_n.jpg
Cylinder 2
http://sphotos-b.xx.fbcdn.net/hphotos-snc7/392982_10151611932694196_382206888_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-prn1/23746_10151611931444196_169420890_n.jpg
Cylinder 3
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/299543_10151611932089196_1785956188_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-prn1/734061_10151611918204196_1808241879_n.jpg
Cylinder 4
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/602751_10151611932274196_819468024_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-snc6/734951_10151611918049196_541777219_n.jpg
While I was in the garage I fiddled a bit more.
http://sphotos-a.xx.fbcdn.net/hphotos-snc6/603176_10151611932754196_562880787_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/307664_10151611933044196_721927408_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/72281_10151611934034196_1977560384_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/877_10151619367504196_1063351709_n.jpg
Wrap was the wrong one, finally got the new one in.
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/524924_10151798888414196_1994976537_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-snc7/576690_10151798888784196_492421940_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/578320_10151798890354196_1102794147_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/6592_10151807012489196_1924659411_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/65249_10151807013019196_741463792_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/541265_10151807013429196_825462463_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/480763_10151807014164196_1372626954_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/1796_10151807014309196_1577349426_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/392750_10151807014599196_2138030892_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/578792_10151800299469196_96001846_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-snc7/578980_10151800301959196_2147400529_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/425887_10151804562779196_253483678_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/65219_10151804563544196_484976704_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/734004_10151804563719196_1321176720_n.jpg
caps April 16th, 2013, 07:06 AM I got the front wrapped up finally...
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/149012_10151820452324196_513492493_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/488280_10151820451879196_2045929025_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/524639_10151820540454196_1977324365_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/523473_10151820540944196_2041566728_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/532291_10151820540624196_2003338613_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/388731_10151820541104196_1505126327_n.jpg
And then I decided to get a little fancy
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/549510_10151820541829196_1588413030_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/546036_10151820542709196_1317127708_n.jpg
However, tomorrow I think I am going to extend the gold to the entire ram air on the front fairing.
All put back together
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/553039_10151825056089196_1232488250_n.jpg
and I painted the M4 logo gold as well
https://sphotos-a.xx.fbcdn.net/hphotos-snc6/181008_10151825055799196_651663098_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/63573_10151829452479196_179369266_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/579581_10151829463234196_1103663809_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-frc1/59229_10151829463509196_1286414044_n.jpg
Sorry I have been neglecting you guys here lately. I work 8:30-5 then spend a couple hours with the wife before venturing down to the garage to do whatever I can till normally 11ish, then sleep to do the same the next day. Along with juggling my extra work, painting the bike, installing parts as they come in, and the Justin Ride I haven't had a ton of time lately. And I go riding on any free time I can muster. But I brought some pictures as a peace offering to you mofo's in hopes that some of you may start showing some interest in this thread again (besides Jayson and Tommy <3 you guys).
So as most of you who are on my facebook (Sorry Tommy, it's always a couple days ahead of this thread) already know I have been painting my rims as well. The rear is done and has already been abused, the front won't get worked on till after the Justin Ride on Sunday.
This is the OEM bronze-ish color that they only made on the 06 (yes I felt kind of bad about painting them, no not enough to buy another set).
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/526538_10151837858339196_1990367561_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/73125_10151837858374196_1728869131_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/550353_10151837858559196_69881425_n.jpg
This is after 2 light coats iirc
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/529179_10151837859339196_1098521051_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/554055_10151837859399196_1214937337_n.jpg
And this is the final color at night.
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/564671_10151837859209196_1157485970_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/558468_10151837859494196_751658812_n.jpg
This is the final color in direct sunlight (SUPER gold)
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/482762_10151837860429196_1231295352_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/529256_10151837860514196_1412726248_n.jpg
I cleared and mounted it so that I can sand it down in a week or two to the desired gloss. Right now it's really Matte, I think I want it a little glossier, but not to much.
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/540123_10151837861744196_1826716354_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/547898_10151837862104196_1338463589_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/3543_10151837862329196_2019657812_n.jpg
The front on the other hand I wanted a high gloss
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/150455_10151837861674196_1550877121_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/625454_10151837861939196_181706410_n.jpg
Here you can see the OEM color in the front, and the painted in the rear
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/531851_10151837861404196_1885946692_n.jpg
OEM Color
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/524096_10151841907464196_60429504_n.jpg
Painted
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/553999_10151841907209196_1865341749_n.jpg
And you guys only get pictures from the North Run today until I start getting some interest here.
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/66875_10151841908184196_130412821_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/15259_10151841907824196_1139650456_n.jpg
caps April 16th, 2013, 07:08 AM Quick recap for you guy.
OEM:
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/405143_10150883962289196_1859344871_n.jpg
PlastiDipped:
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/578523_10151631307469196_167864254_n.jpg
Wrapped:
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/553039_10151825056089196_1232488250_n.jpg
I'll get some updated pictures now that the front rim is painted. If you have any questions feel free to fire away.
Also, the full build thread is on my local forum;
http://tampasportbikes.com/forum/showthread.php?60953-Caps-update-on-the-scooter
caps April 16th, 2013, 07:10 AM Oh and the stable has changed as well;
2012 Ducati Monster
2010 Ninja 250
2006 ZX-14
2005 Yamaha R6
caps April 17th, 2013, 03:53 PM Got something shiny in the mail today....
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/544853_10151847962249196_2091889463_n.jpg
caps April 19th, 2013, 10:21 AM What you guys don't love me anymore? :(
I brought you a peace offering;
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/563780_10151851654394196_1647550809_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/526465_10151851654409196_2144244978_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/21212_10151851654264196_46417801_n.jpg
Reddoak April 19th, 2013, 07:29 PM What you guys don't love me anymore? :(
I brought you a peace offering;
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/563780_10151851654394196_1647550809_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/526465_10151851654409196_2144244978_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/21212_10151851654264196_46417801_n.jpg
I still love you.
Wrapped bike looks real good, now wrap my car!
But you're still a dork. That is all...
Cazper April 19th, 2013, 10:39 PM The bike is looking freakin' sick!!!! :thumbup:
psych0hans April 19th, 2013, 11:04 PM Love what you've done to the bike... :thumbup:
caps April 20th, 2013, 08:12 AM I still love you.
Wrapped bike looks real good, now wrap my car!
But you're still a dork. That is all...
Maybe... To both...
The bike is looking freakin' sick!!!! :thumbup:
thanks bud
Love what you've done to the bike... :thumbup:
thanks
And guess what I'm doing today...
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/68521_10151853420889196_821139783_n.jpg
Cazper April 20th, 2013, 09:23 AM You are going to murder the girl on the floor with the screwdriver :eek:
caps April 20th, 2013, 03:09 PM You are going to murder the girl on the floor with the screwdriver :eek:
No...
But I did remove these;
http://tampasportbikes.com/forum/attachment.php?attachmentid=29913&stc=1&d=1366490303
saxnbass April 21st, 2013, 06:18 AM And guess what I'm doing today...
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/68521_10151853420889196_821139783_n.jpg
He has a weapon! RUUUUNNNNNNN!!!!!!!!!!!
( http://www.huffingtonpost.com/2013/02/21/xavier-nunez-stabbing_n_2735939.html ) It's a running joke around these parts due to this incident :p
saxnbass April 21st, 2013, 06:19 AM No...
But I did remove these;
http://tampasportbikes.com/forum/attachment.php?attachmentid=29913&stc=1&d=1366490303
Also.... we can't see that pic cause we're not all part of TSB
caps April 22nd, 2013, 07:21 AM Also.... we can't see that pic cause we're not all part of TSB
Tis good point.
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/521586_10151854051299196_713818789_n.jpg
caps April 22nd, 2013, 07:22 AM I also cleaned my air filter and changed the hydraulic fluid in my clutch.
https://sphotos-b.xx.fbcdn.net/hphotos-frc3/431971_10151856082089196_1236156342_n.jpg
Oh, and mounted the rear brake line with new fluid (of coarse).
Reddoak April 28th, 2013, 08:15 PM I also cleaned my air filter and changed the hydraulic fluid in my clutch.
https://sphotos-b.xx.fbcdn.net/hphotos-frc3/431971_10151856082089196_1236156342_n.jpg
Oh, and mounted the rear brake line with new fluid (of coarse).
Of course you should read this: http://wiki.answers.com/Q/What_is_the_difference_in_meaning_of_course_and_coarse :D
caps April 30th, 2013, 03:43 PM Of course not...
:thumbup::thumbup:
Anyway, I ordered sprockets today :D
JohnnyBravo May 1st, 2013, 09:12 AM Like what you've done with the gold and wrap!!! Kudos
caps May 1st, 2013, 11:40 AM Like what you've done with the gold and wrap!!! Kudos
Thanks bud.
I also ordered my new chain today :thumbup:
JohnnyBravo May 1st, 2013, 11:45 AM I doubt I'd ever buy a beast like that... I look like I'm strattled on a Volkswagen beetle
felo May 1st, 2013, 11:49 AM looks awesome but i dont really like those huge bikes
caps May 2nd, 2013, 07:35 AM I doubt I'd ever buy a beast like that... I look like I'm strattled on a Volkswagen beetle
I'm not exactly small, I easily fill it out.
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/521988_10200544819373687_195174616_n.jpg
looks awesome but i dont really like those huge bikes
Lol, they aren't for everyone
TheDementedDrummer May 2nd, 2013, 08:12 AM I'm not exactly small, I easily fill it out.
Lol, they aren't for everyone
How tall are you?
JohnnyBravo May 2nd, 2013, 08:29 AM Yea it fits you... I look laughable on such a huge machine
Reyno2ac May 2nd, 2013, 10:17 AM I've never liked gold...until I started seeing black and gold motorcycles.
caps May 2nd, 2013, 12:21 PM How tall are you?
I'm roughly 6'1, 260
Yea it fits you... I look laughable on such a huge machine
You should see me on the 250 :eek:
I've never liked gold...until I started seeing black and gold motorcycles.
That's because it's sexy :thumbup:
JohnnyBravo May 2nd, 2013, 12:26 PM 5'almost 8" haha bout 150
TheDementedDrummer May 2nd, 2013, 11:37 PM Makes sense, I'm 5'11, about 140, and i look like a little grasshopper on my friend's Busa :eek:
caps May 3rd, 2013, 11:03 AM 5'almost 8" haha bout 150
Makes sense, I'm 5'11, about 140, and i look like a little grasshopper on my friend's Busa :eek:
Your both too small. Ever ride a fullsize jetski? It's like that.
caps May 3rd, 2013, 11:03 AM P.s. I'm picking up my chain in like 15 min.
JohnnyBravo May 3rd, 2013, 11:23 AM No but I've had my picture took on big bikes... The opposite of a bear on a mini bike
caps May 3rd, 2013, 12:10 PM No but I've had my picture took on big bikes... The opposite of a bear on a mini bike
lol
Side note:
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-snc6/190439_10151879362479196_527326288_n.jpg
:thumbup:
caps May 6th, 2013, 07:29 AM Ordered my stretch yesterday.
(This should get interesting..)
ninja_thresh_hold May 6th, 2013, 07:39 AM Don't think I'd want to own one, because I'd surely lose my license, but I'd love to know what it feels like to have that much power on 2 wheels. It doesn't look like it'd be as prone to lifting the front wheel as a ZX6R seems to be...is that the case?
thats assumingt that the 5-0 can read your tag while going 200mph ;) they'd surly never catch me alive if i had one, speaking of which... caps can i borrow your 14r for a bit of cross country fun?:cbrsmiley:
caps May 6th, 2013, 07:59 AM thats assumingt that the 5-0 can read your tag while going 200mph ;) they'd surly never catch me alive if i had one, speaking of which... caps can i borrow your 14r for a bit of cross country fun?:cbrsmiley:
No, and yes they can. The dash cams they use down here are not like on cops. They can EASILY read a tag at 150+ :mad:
ninja_thresh_hold May 6th, 2013, 08:06 AM Lol here in alabama, any officer must stop persuit if the chase reaches over 120 mph lol, and plus, I'd just weave through traffic and hide my tag lol
caps May 6th, 2013, 08:39 AM Lol here in alabama, any officer must stop persuit if the chase reaches over 120 mph lol, and plus, I'd just weave through traffic and hide my tag lol
It's illegal to chase a bike here in FL unless the officer witnesses a felony. However, that doesn't stop them;
http://www.abcactionnews.com/dpp/news/region_north_pinellas/clearwater/witness-says-deadly-crash-on-courtney-campbell-started-with-police-chase
The dash cam was just released this week and it shows the cop chasing, as well as lane splitting the bikes to get to the front.
caps May 7th, 2013, 10:13 AM I got a text earlier today...
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/21094_10151886800079196_870407131_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/942953_10151886802919196_1514010452_n.jpg
caps May 8th, 2013, 10:50 AM https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/401935_10151888928459196_560620540_n.jpg
Whiskey May 11th, 2013, 04:06 PM Ordered my stretch Ruined a cracking bike yesterday.
(This should get interesting..)
Fixed that for ya
caps May 12th, 2013, 12:42 PM Fixed that for ya
And how exactly is that?
Whiskey May 12th, 2013, 01:37 PM Try to do this
24726
on this
24727
While you're at it will you fit it with one of these
24728
caps May 14th, 2013, 06:52 AM Ah, I see you have no idea what you are tlaking about. Anyway the last parts should be here soon. I sent some parts off to powdercoating yesterday.
caps May 15th, 2013, 11:33 AM https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/947373_10151901452699196_1521884022_n.jpg
Sand blasted, ready for powder :D
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/968980_10151901638539196_1040100075_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/205516_10151901784639196_1477503670_n.jpg
Before and After
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/942901_10151902130724196_337530381_n.jpg
And on to the fun stuff :-)
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/599356_10151902130044196_800753675_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/945891_10151902128229196_1850944073_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/944190_10151902129194196_1045906781_n.jpg
The brake mount REALLY limits how far forward it can go, I may still be able to take a link or two out, but right now it's WAY longer than I wanted. If I knew it would be this long I would have gone with a 45T rear instead of the 43T I got (41T is stock).
I'm going to ride it for a bit and see how a feel about it. Taking links out will only lessen the way to handles. So if it is blatantly apparent that I don't like it I would rather just take the blocks out instead of fiddling with the chain twice (once to take links out, once to take the blocks out).
But either way this is my bike as of now;
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/431811_10151902128979196_1058729016_n.jpg
I was hoping the tail would only be 1-2 inches shorter than where the tire sits. That didn't quite happen...
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/947188_10151902129809196_1556592186_n.jpg
It is also missing a brake line hose that didn't get powder coated yet.
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-snc7/294821_10151902128674196_1731972994_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/941792_10151902130299196_111479441_n.jpg
caps May 15th, 2013, 11:39 AM https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/946946_10151903432004196_792571674_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/969899_10151903436559196_841114887_n.jpg
TheDementedDrummer May 16th, 2013, 01:44 AM My god.
NathanUc May 16th, 2013, 03:16 AM That is a MASSIVE chain... I never really paid attention to the overall size of a 530 until your installation pic haha. That rear sprocket/chain set looks really solid though.
What kind of numbers are you getting on the strip?
caps May 16th, 2013, 05:54 AM https://sphotos-b.xx.fbcdn.net/hphotos-ash4/294829_10151904846529196_1801865349_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn2/264439_10151904846029196_128481688_n.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/969395_10151904847134196_1026482398_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/936849_10151904846679196_812444606_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/935257_10151904846249196_2085021420_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/942942_10151904846879196_628705144_n.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/942711_10151904845784196_1611242030_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/294829_10151904846529196_1801865349_n.jpg
caps May 16th, 2013, 05:55 AM That is a MASSIVE chain... I never really paid attention to the overall size of a 530 until your installation pic haha. That rear sprocket/chain set looks really solid though.
Yea the 530's are HUGE!!!! PM me later on today and I'll get a picture of the 530 next to the chain on the 250.
What kind of numbers are you getting on the strip?
High 6's currently, my size is a VERY limiting factor. At this point I am just trying to get consistent, most nights I can vary up to a full second :eek:
caps May 16th, 2013, 05:59 AM https://sphotos-a.xx.fbcdn.net/hphotos-prn1/922716_10151904868244196_835973617_n.jpg
caps May 16th, 2013, 07:29 PM That is a MASSIVE chain... I never really paid attention to the overall size of a 530 until your installation pic haha. That rear sprocket/chain set looks really solid though.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-frc1/249162_10151906115779196_1973748830_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/941626_10151906116044196_937355459_n.jpg
caps May 16th, 2013, 07:34 PM Just ordered this;
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/944206_10151906116614196_1212375051_n.jpg
NathanUc May 17th, 2013, 01:19 AM https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-frc1/249162_10151906115779196_1973748830_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/941626_10151906116044196_937355459_n.jpg
It's practically a chain made out of chains!
Also that gas cap looks awesome. I wanted to get one of the driven ones, but it wouldn't work with my tank bars :(
KawiKid860 May 17th, 2013, 02:36 AM Stretched isn't really my thing, and apparently not too popular on this forum in general, but I gotta say this is probably the best 14R I've ever seen. Simple, clean and functional. No retarded super fancy single sided swing arm with a 300+ tire on it and ridiculous chrome everywhere lol. + you fit the bike and you've put a ton of work into it.
caps May 17th, 2013, 08:57 AM Stretched isn't really my thing, and apparently not too popular on this forum in general, but I gotta say this is probably the best 14R I've ever seen. Simple, clean and functional. No retarded super fancy single sided swing arm with a 300+ tire on it and ridiculous chrome everywhere lol. + you fit the bike and you've put a ton of work into it.
Thanks bud I truly appreciate it. I know it's not a popular thing (on any forum I care to take part in) to stretch a bike. One of these days I will throw it on a dyno and these guys will understand. At this point, it's really needed.
And there is actually a LOT more work put into it than what is in this thread. My build thread since October is here;
http://tampasportbikes.com/forum/showthread.php?60953-Caps-ZX-14-Build
However, it is close to being done (cosmetically).
•Powder Coat bolt heads (Black)
•Powder Coat Wheels (Gold)
•Powder Coat Clutch/Stator Covers (Gold)
•Ceramic Coat Headers (Black)
•Rizoma Resevoirs (Black )
•New Seats (One stock cut down for drag racing, one Saddleman)
•Kickstand
Then Next year will be Suspension/Brakes and this thing will be done completely. Unless I decide to get another one and turbo this one (seriously considering).
walty87 May 17th, 2013, 09:14 AM man what does that thing sound like!?
caps May 17th, 2013, 10:31 AM Nasty :D
I'll try to get a sound clip here soon. I think I have one before I took the baffles out.
caps May 20th, 2013, 08:43 AM I just picked up a Rizoma CT025 Fluid Tank and bracket for next to nothing :-)
http://www.zx14ninjaforum.com/userfiles/dragking/ScottSteeringDamper.jpg
http://www.zx14ninjaforum.com/userfiles/dragking/Rizoma%20Clutch%20Fluid%20Tank%20.jpg
http://www.zx14ninjaforum.com/userfiles/dragking/Rizoma%20Clutch%20Fluid%20Tank%202.jpg
As soon as the wife let's me free again I will get the CT027 from Drew over at Euro Cycles and be a happy camper!
massacremasses May 20th, 2013, 08:50 AM I want one. How much and where?
caps May 20th, 2013, 09:15 AM As with 90% of my purchases, it's a one time deal. Sorry bud.
massacremasses May 20th, 2013, 09:53 AM http://www.zx14ninjaforum.com/messages.cfm?threadid=779E86B7-1372-66AE-3B45C514310679E5
i see
caps May 20th, 2013, 12:58 PM Yup. That is in fact where this one was purchased from, your point?
massacremasses May 20th, 2013, 01:59 PM Yup. That is in fact where this one was purchased from, your point?
Oh I was just saying I found the thread, I understand...
caps May 21st, 2013, 05:31 AM OEM
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/164958_10151914414564196_793544301_n.jpg
Evotech
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/933914_10151914412424196_1490583717_n.jpg
caps May 23rd, 2013, 05:34 AM Reservoirs are on :-)
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/969188_10151918958674196_1906013368_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc3/312226_10151919427214196_1653810796_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/417935_10151920056229196_1880450084_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/292429_10151920055899196_963749683_n.jpg
NathanUc May 24th, 2013, 11:38 AM That gas cap looks sextacular...
Also, nothing wrong AT ALL with extending a bike that's being drag raced. I think you did a very very tasteful job extending yours.
We want a vid of you and the bike on the drag strip :)
caps May 24th, 2013, 11:52 AM I'll try to remember when I get a chance to go again.
caps May 26th, 2013, 01:29 PM https://sphotos-b.xx.fbcdn.net/hphotos-ash3/923193_10151924732064196_1809079898_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc1/580393_10151925497969196_11478222_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/382490_10151925619934196_617403127_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn2/969935_10151925620109196_1253070652_n.jpg
choneofakind May 26th, 2013, 01:47 PM I like that ZX6R :)
caps May 26th, 2013, 02:37 PM I like that ZX6R :)
Yea, overall I'm happy with that build. When I pick up an 05-06 it will be an EXTREMELY close copy (more gold).
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/935556_10151624707474598_1976499870_n.jpg
choneofakind May 26th, 2013, 04:23 PM I'm not usually fond of the 03-04 model. That's the first one I've seen in white. Normally I think the combo of the headlights and air scoop looks like a piggy face. That one looks good.
caps May 26th, 2013, 04:25 PM Escalade white ;-)
massacremasses May 26th, 2013, 09:41 PM 05-06 ... best years.
NathanUc May 27th, 2013, 12:56 AM 05-06 ... best years.
Other than 2013 obviously:)
As for caps.... in a parking garage and no sound clips recorded? INSTABAN
caps May 27th, 2013, 04:45 AM Lol. I have a 14. No parking garage needed!
caps May 28th, 2013, 06:47 AM https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/941635_10151626644979598_699045589_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-frc1/425183_10151626624914598_2021018485_n.jpg
Note to self: Re-host/Re-post.
caps May 31st, 2013, 05:50 AM https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/425204_10151936842819196_988670058_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/942280_10151936842579196_2088342848_n.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc1/484859_10151936842399196_535442775_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/485598_10151936843209196_1124359432_n.jpg
Cazper May 31st, 2013, 05:35 PM I don't know why I even come in here... just makes me sad that I let the wife convince me to settle on my 03' 636. Don't get me wrong I am falling for my 636... I just really do still want a 14. Someday :doh:
caps May 31st, 2013, 05:37 PM Lol. It's an obsession for sure.
caps June 10th, 2013, 07:18 AM Well... Unsurpisingly the bike is getting more gold :eek:
The wheels are currently painted, but they will be done in the same gold powderoat that the heel guards are already done in. Also, the Stator/Clutch covers will be done in the same gold.
First step is to get it on the lift and secured. I never realized how hard that would be now that it is stretched...
https://sphotos-a.xx.fbcdn.net/hphotos-frc1/1005861_10151958707264196_86459932_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc3/972157_10151958707679196_19463131_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/946422_10151958707334196_1368551471_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/992962_10151958707474196_60842833_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-frc3/969210_10151958707574196_692749015_n.jpg
It required two people and removing parts of the lift (front wheel chock, and stopper), I may need to pick up an aftermarket front wheel chock and bolt it to this lift like some have done on the 14 forums.
Then remove the parts for powdercoating
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/580424_10151958709834196_2058222604_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/7456_10151958710539196_2146087587_n.jpg
The wheels still need to be disassembled, but the shop that is going to take the rubber off isn't open today, so I wasn't in a big hurry to get those done.
And the last step is to take some more (mostly useless) pictures for the forums!
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/941549_10151958710414196_233593254_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/988483_10151958709559196_1331113122_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-frc3/972001_10151958710789196_1569475138_n.jpg
caps June 13th, 2013, 12:56 PM So... Last we were getting ready to powdercoat the parts. If you have never actually seen powdercoating done it is actually a REALLY cool process, I knew how it was done, and how it works, but I had never seen it done before. My covers used to look like this;
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/580424_10151958709834196_2058222604_n.jpg
Then after media blasting they looked like this (the glass sight is taped over);
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/5353_10151960109524196_1293398788_n.jpg
Ok, this is where it gets interesting, the orange thing on the left is the powdercoating gun. The top (clutch) cover is already coated, and the lower (stator) is not yet.
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/1002229_10151960109864196_278154275_n.jpg
Both coated
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/988605_10151960109984196_618290870_n.jpg
After the oven
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc1/998115_10151960110289196_1200418057_n.jpg
Then about 20 min of sitting
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/1003456_10151960111279196_772710700_n.jpg
I think that it's pretty cool that the color seems to mature as it cures.
And a few of them mounted for you guys ;-)
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/296107_10151960231609196_1667985428_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/941951_10151960231949196_1999614667_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn2/971613_10151960230894196_1672924217_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/995813_10151960232374196_804182163_n.jpg
caps June 13th, 2013, 12:56 PM And that brings us to these bad boys
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/7456_10151958710539196_2146087587_n.jpg
They are currently painted, but I found out (the hard way) that the degreaser I use on my spring also happens to eat paint like it's nothing. So we will fix that in the same way as we took care of the cases :thumbs:
First I removed the sprocket, rotors, and cush drive
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc3/970851_10151962322434196_1744584115_n.jpg
And stored them safely :fishslap:
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/1003122_10151962700564196_286331516_n.jpg
And took a small trip to the local shop that ALWAYS takes care of me! Most people just assume their service is crazy expensive, but I was so amazed at the prices that I decided it wasn't worth it for me to pick up a tire changer (came real close though!)
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/295520_10151962323659196_19708240_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/999671_10151962324989196_1745343709_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/1001146_10151962324164196_2019009409_n.jpg
I was just going to deal with the bearings later, but the Tech told me he would show me and the next thing I know...
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/580468_10151962332744196_839748958_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/1017201_10151962332604196_964332485_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/1004735_10151962332849196_1339082037_n.jpg
And then I was ready to go (with a bag full of old bearings, seals, and spacers)!
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/1016372_10151962333059196_2017404650_n.jpg
And this is how we sit now till I get around to powdercoating them tonight
https://sphotos-b.xx.fbcdn.net/hphotos-prn2/5589_10151962333414196_345973847_n.jpg
massacremasses June 13th, 2013, 03:16 PM I cant see the last picture. Did you blast them then?
caps June 13th, 2013, 03:38 PM Its them in the back of my car. I'm blasting the front right this moment
choneofakind June 13th, 2013, 06:02 PM I wish I had a bearing puller. That would have made doing my tapered rollers so much easier. Plus I could get my wheels PC'd. Ahhh, eventually. :)
caps June 14th, 2013, 05:50 AM I wasn't sure if my old bearings would be good, so I got new ones
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/246981_10151966900154196_473521874_n.jpg
And put them where they go
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/970196_10151967746574196_215041902_n.jpg
This is the OEM color and the painted color
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/1011148_10151967951199196_1522075491_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/1017285_10151967951454196_1033500240_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/994758_10151967951349196_1989549436_n.jpg
Which we promptly removed
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/969084_10151967951959196_722534070_n.jpg
Yadda, yadda, yadda... Boom!
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/5990_10151967953364196_438509871_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/1000540_10151967955949196_1949154973_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/1017400_10151967955919196_1474093720_n.jpg
My powdercoater also signs things...
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/1010518_10151967952764196_1945066378_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/r90/600430_10151967956094196_175899471_n.jpg
Now on the rear I took a few more pictures of the process again for you guys
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/1013972_10151967956359196_403398389_n.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/998261_10151967956714196_1684462542_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/1016687_10151967956984196_1782804426_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/1013413_10151967956809196_1941122846_n.jpg
Now it got a LOT later by the time we finished the rear (this ended up being a 6 hour endeavor, not including re-installing bearings), so the color looks a bit off because we have nothing but artificial light.
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/1001143_10151967957764196_219816175_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-frc1/1002410_10151967957639196_53315115_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc1/1001628_10151967957889196_2113881327_n.jpg
My wife also decided to draw a cat on the inside (covered by tire) of my rim...
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/1010653_10151967958014196_2041654272_n.jpg
Now it's definitely not perfect, mosty becasue I rushed him a lot.... And he offered to redo them, but honestly I'm too impatient and want to get back to riding my bike. I may redo them if my bike ever becomes a trailer queen, but for a bike that gets the snot beat out of it regularly I'm a happy camper.
massacremasses June 14th, 2013, 09:54 AM I like his set up. :lol:
caps June 14th, 2013, 10:24 AM I like his set up. :lol:
You have no idea, it's sketchy as **** but he does good work for DIRT cheap.
choneofakind June 16th, 2013, 08:31 AM Still cool! and nice choice on the All Balls bearings. I like their quality a lot.
caps June 17th, 2013, 08:52 AM Still cool! and nice choice on the All Balls bearings. I like their quality a lot.
Lol, I knew you liked the balls :thumbup:
So since the wheels are being redone I figured I would provide a few pictures for fun/boredom.
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/1010932_10151975730754196_982751700_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-frc3/970734_10151975732854196_1078985828_n.jpg
choneofakind June 17th, 2013, 01:39 PM bahaha like the balls. :lol:
caps June 22nd, 2013, 06:48 PM Updates;
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc3/q82/s720x720/954602_10151979128629196_1562812039_n.jpg
Bearings and cush drive are in. Rotors in the am, tires in the pm.
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/p480x480/19881_10151979863024196_1339472589_n.jpg
And a hair of hdr to bring out the gold. (Both cell phone pics)
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc1/p480x480/375617_10151979863274196_1799626446_n.jpg
caps June 22nd, 2013, 06:49 PM https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/q77/s720x720/1011906_10151983344574196_1959756937_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/q71/s720x720/7470_10151983344904196_136451427_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn1/q71/s720x720/1017648_10151987780604196_1135974046_n.jpg
IT'S ALIVE!!!!!!
nickjpass June 23rd, 2013, 11:43 PM I want golden rims.
caps July 15th, 2013, 07:51 PM Picked up a brand new Shoei X12 for DIRT cheap!
https://sphotos-b.xx.fbcdn.net/hphotos-prn2/q77/s720x720/1070074_10152040709069196_50314856_n.jpg
And I'm sure it's no surprise I found another Rizoma piece
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/q77/s720x720/1011859_10152021980819196_390798079_n.jpg
And a few more pics have been taken at different events
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/q77/s720x720/998013_10151519678471517_549283313_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/q80/s720x720/993526_183063081860270_388767315_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/q77/s720x720/1011162_183062855193626_373896752_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/q81/s720x720/993923_10152019690619196_31331336_n.jpg
caps July 18th, 2013, 10:26 AM I got some more pics for you slackers.
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/q88/s720x720/1016224_10152046807674196_131542208_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/q86/s720x720/1001030_10152046808099196_1585852502_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/q86/s720x720/999343_10152046807399196_1404243039_n.jpg
This Girl Rides July 18th, 2013, 10:49 AM That bike is HUGE, my god.
To each their own.
Klondike1020 July 18th, 2013, 11:27 AM I like the gold black balance. the front intake looks good!
that bike looks like a stealth bomber!
saxnbass July 18th, 2013, 11:40 AM That M4 exhaust is silly long, looks kind of weird to me. The old 2Bros didn't look that long.
caps July 18th, 2013, 12:44 PM That bike is HUGE, my god.
To each their own.
Lol, I'm 6'1" and 270lbs. I need a big bike.
I like the gold black balance. the front intake looks good!
that bike looks like a stealth bomber!
Lol, yea it does. Thanks bud!
That M4 exhaust is silly long, looks kind of weird to me. The old 2Bros didn't look that long.
It's kind of an optical illusion. They are a few inches shorter, but they get wider as they go back. The coloring makes them hard to photograph (at least on a cell phone during lunch) because in the picture they look super long and skinny, which they aren't.
choneofakind July 18th, 2013, 05:16 PM Stealth bomber, as in B2? YEah, those are really agile :p
I don't like how Zx14's look. But you made it look pretty cool. I do like how they get up and GONE. That was a fun test ride at a Kawi demo day. :)
caps July 19th, 2013, 04:29 AM Stealth bomber, as in B2? YEah, those are really agile :p
I don't like how Zx14's look. But you made it look pretty cool. I do like how they get up and GONE. That was a fun test ride at a Kawi demo day. :)
Lol, I've never been a huge fan of the front end. And I used to think they would get up and go... until I REALLY started modding it :eek:
TheDementedDrummer July 19th, 2013, 06:52 AM Have you thought about getting a Brock's Alien Head 2 to replace the M4?
Much better looking, IMO.
caps July 19th, 2013, 10:11 AM No. I don't like brocks exhausts. If I was going to get one it would be a CT Dual in satin black with gold emblems, but that's not worth $2, 500.
caps July 24th, 2013, 07:30 PM https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc1/q82/s720x720/1000736_10152062996284196_1558724470_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/q83/s720x720/533617_10152062996529196_947020058_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/q83/s720x720/66119_10152062996679196_1030330098_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-frc3/q85/s720x720/1069211_10152062998084196_1130607546_n.jpg
caps July 24th, 2013, 07:30 PM Before;
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/260381_10151910202249196_1407455583_n.jpg
KawiKid860 August 5th, 2013, 12:45 AM Wow, stretched ZX-14, what a squid. Bet I could smoke him easily on my mere 600.
jk jk jk
I love letting this thread sit to "ferment" for a while then coming to see what more you've done to this beast of a bike. It's probably been stated before but what's she run in the quarter? I want to take my CBR to the drag strip so bad but I don't think I'll have her up and running by the next open race day they're having
Dark August 5th, 2013, 03:31 AM bwahaha.
Should've never ruined a good bike...besides tossing those garbage 2bros cans.
Nothing screams "parking lot poseur" like an extended swingarm.
I got some more pics for you slackers.
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/q88/s720x720/1016224_10152046807674196_131542208_n.jpg
caps August 5th, 2013, 04:24 AM Wow, stretched ZX-14, what a squid. Bet I could smoke him easily on my mere 600.
jk jk jk
I love letting this thread sit to "ferment" for a while then coming to see what more you've done to this beast of a bike. It's probably been stated before but what's she run in the quarter? I want to take my CBR to the drag strip so bad but I don't think I'll have her up and running by the next open race day they're having
Lol, I've got multiple bikes for a reason. I haven't made it to the 1/4 mile yet at all (local track is 2 hours each way), but the 1/8th I was running mid 6's with a bad prep before the stretch. The bike EASILY has mid 5's in it, but at my size that's kind of hard to do...
Dark August 5th, 2013, 09:32 AM Don't worry bud, some day when you get a big boy bike, you'll understand why it's extended.
And it's a good thing I don't mod my bikes to please some random kid on the internet :rolleyes:
Perhaps you mean the one that cost more than both of your bikes combined, wasn't purchased 2nd hand and isn't built to squid around on? :rolleyes:
Or do you want me to post some of the other bikes? Maybe the R1 with forged wheels and not just a cheap powder coat?
Your choice in mods don't need to please me but they certainly make me laugh at you. And no, my 'big boy bikes' don't make me understand the need for an extended swingarm because I enjoy how well they handle. :thumbup:
caps August 5th, 2013, 10:43 AM And I'm done feeding the troll.
Alex August 5th, 2013, 11:09 AM You're both turning a fun thread into one that is somewhat less than fun. PM's are the right place for this discussion to continue.
Dark August 5th, 2013, 11:10 AM I would love to see all of them :)
caps August 5th, 2013, 11:24 AM You're both turning a fun thread into one that is somewhat less than fun. PM's are the right place for this discussion to continue.
Your right, I deleted my posts since they aren't relevant to this build thread.
massacremasses August 5th, 2013, 12:48 PM http://anadder.com/another_meme.jpg
caps September 4th, 2013, 06:56 AM Got a new part in... a functional one this time. .
TheDementedDrummer September 4th, 2013, 08:59 AM Are you going to show us? :)
JohnnyBravo September 4th, 2013, 12:41 PM I am officially protesting your lack of over the top extension... Your bike is way to short to cruise florida sir :pound:
Glad ya extended it, def help ya keep the front tire down at the strip!!! Lookin good! Maybe one day ill get a big boy bike :popcorn:
KawiKid860 September 4th, 2013, 01:07 PM So I saw a 14 for sale on the pnw riders forum... it was pretty much the polar opposite of this bike. It was set up for, wait for it, HANDLING!
Sinister September 4th, 2013, 01:20 PM Definately like the black + gold accents. I would never extend mine, just not my thing but digging the detail work.
caps September 4th, 2013, 01:59 PM Are you going to show us? :)
Haven't decided...
I am officially protesting your lack of over the top extension... Your bike is way to short to cruise florida sir :pound:
Glad ya extended it, def help ya keep the front tire down at the strip!!! Lookin good! Maybe one day ill get a big boy bike :popcorn:
Lol, that's the idea! And I actually wanted it shorter but that won't happen till I build a custom swingarm.
So I saw a 14 for sale on the pnw riders forum... it was pretty much the polar opposite of this bike. It was set up for, wait for it, HANDLING!
I'll take one of the Ducs out if I want to turn :-P
Definately like the black + gold accents. I would never extend mine, just not my thing but digging the detail work.
Lol, thanks bud. It's not everyone's cup of tea, but it was built to be exactly what it is; mine!
JohnnyBravo September 4th, 2013, 04:00 PM They may take your florida also license... You know it's gota be over stretched... Haha like that one guy said, that's how we ride. :pound:
When I get a big bike folks gonna pitch a fit... Gonna be way long an low, probly won't turn good as a ship, but it'll be purdy to me.
Ya bikes lookin tight... Come on Ya gota show off your new turbos!!!
caps September 5th, 2013, 12:55 PM They may take your florida also license... You know it's gota be over stretched... Haha like that one guy said, that's how we ride. :pound:
When I get a big bike folks gonna pitch a fit... Gonna be way long an low, probly won't turn good as a ship, but it'll be purdy to me.
Ya bikes lookin tight... Come on Ya gota show off your new turbos!!!
Its funny you mention that, I actually purchased a turbo for the 14 a few months ago, but decided it wasn't the size I would want and that I really need a second 14 if I was going to turbo this one. So I sold it :-P
Asspire September 5th, 2013, 01:33 PM why isn't red?
JohnnyBravo September 5th, 2013, 01:39 PM Its funny you mention that, I actually purchased a turbo for the 14 a few months ago, but decided it wasn't the size I would want and that I really need a second 14 if I was going to turbo this one. So I sold it :-P
Full on turbo race motor? New Nitrous system? Hmmmm what could this part be
You got a bad bike... Dunno what folks hatin for, haterz gon hate though
caps September 6th, 2013, 09:12 AM why isn't red?
What?
Full on turbo race motor? New Nitrous system? Hmmmm what could this part be
You got a bad bike... Dunno what folks hatin for, haterz gon hate though
Lol, I'm actually seriously debating a nitrous system. Just a 40shot fogged through the airbox. But that's not now
caps September 6th, 2013, 09:15 AM P.s. its not motor related and needs another part to be worked before replacing the old one...
Asspire September 6th, 2013, 09:24 AM red is awesome. especially with gold rims
JohnnyBravo September 6th, 2013, 10:07 AM What?
Lol, I'm actually seriously debating a nitrous system. Just a 40shot fogged through the airbox. But that's not now
Haha duh! Your bikes badass, ducs look good in red though. I ain't ever believed the movies with ninjas in red, especially if they wore gold shoes
caps September 7th, 2013, 08:34 PM Haha duh! Your bikes badass, ducs look good in red though. I ain't ever believed the movies with ninjas in red, especially if they wore gold shoes
Oddly enough my current duc is black and my 250 is red!
And my newest part!
https://sphotos-a-mia.xx.fbcdn.net/hphotos-ash3/1231696_10152174892174196_318164528_n.jpg
JohnnyBravo September 8th, 2013, 05:09 AM Your truck is gonna look odd with one lowering spring.
caps September 8th, 2013, 09:15 AM Your truck is gonna look odd with one lowering spring.
I'll tell them it's got hydrolics ;-)
JohnnyBravo September 8th, 2013, 09:42 AM Haha can I say that's how we ride in Florida on that one? Hahahaha
Forever three wheel
caps September 24th, 2013, 11:29 AM I've been meaning to get the shock re-valved and mount the spring. But I've been tied up working on the house and finalizing the purchase of another bike :-)
caps October 1st, 2013, 11:15 AM https://fbcdn-photos-b-a.akamaihd.net/hphotos-ak-ash4/1378894_10152236210814196_466725166_n.jpg
caps October 3rd, 2013, 05:16 AM https://fbcdn-photos-d-a.akamaihd.net/hphotos-ak-ash4/1378250_10152238259129196_508410293_n.jpg
caps October 3rd, 2013, 05:41 AM No love for my bike anymore?
JohnnyBravo October 3rd, 2013, 09:34 AM Another bike?? I been busy moving an such
saxnbass October 3rd, 2013, 12:32 PM No love for me anymore?
*Fixed :eek: :p
choneofakind October 3rd, 2013, 12:43 PM Revalving the shock? Is this to work with the extended swingarm? Sorry, I'm not familiar with mods associated with stretched/lowered bikes... I like 'em high and tippy.
caps October 3rd, 2013, 06:44 PM Revalving the shock? Is this to work with the extended swingarm? Sorry, I'm not familiar with mods associated with stretched/lowered bikes... I like 'em high and tippy.
It's more to work with my size than the stretch, and my rear is taller than oem to retain the turn in.
caps October 3rd, 2013, 06:45 PM Forks are up next.
https://scontent-a-atl.xx.fbcdn.net/hphotos-frc3/q75/s720x720/1235471_10152242287434196_646749578_n.jpg
https://scontent-a-atl.xx.fbcdn.net/hphotos-prn2/q71/s720x720/1379825_10152242287334196_1953506107_n.jpg
https://scontent-a-atl.xx.fbcdn.net/hphotos-frc3/q75/s720x720/1382987_10152242287214196_1419976999_n.jpg
https://scontent-a-atl.xx.fbcdn.net/hphotos-prn2/q71/s720x720/1235121_10152242287129196_1115217413_n.jpg
https://scontent-b-atl.xx.fbcdn.net/hphotos-prn1/q71/s720x720/994001_10152242286914196_1759285220_n.jpg
JohnnyBravo October 3rd, 2013, 09:18 PM Where is your nother bike thread??? Cause you def said finalize new bike purchase. What's that fancy thing you got your rear hooked to? Looks like its filling a oodles shaped nitrous bottle
caps October 4th, 2013, 04:36 AM Lol, I actually have several bikes. I only post my build thread for the kawi's here.
And that bike didn't work out :-(
You're looking at my rear shock being filled with oil. I'm still debating nitrous.
TheDementedDrummer October 4th, 2013, 07:20 AM Take a picture of the fleet of bikes you own. :D
JohnnyBravo October 4th, 2013, 07:57 AM Cool. I've never played with much suspension except switching out parts, all this valving and such makes me think everyone is installing hydros or airbags.
That sux, but there are plenty more bikes all around everywhere.
caps October 4th, 2013, 07:57 AM I don't have a fleet, but I'm sure I have a picture or two.
JohnnyBravo October 4th, 2013, 08:03 AM How many do ya gota have to be considered a fleet?
caps October 4th, 2013, 08:17 AM Take a picture of the fleet of bikes you own. :D
Here are the regulars at our old place.
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/905335_10151869746859196_1156520056_o.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc1/904229_10151869747169196_1697372224_o.jpg
caps October 4th, 2013, 08:18 AM How many do ya gota have to be considered a fleet?
I dunno. I'd consider a fleet to be 10+
JohnnyBravo October 4th, 2013, 09:40 AM Three batmans an almost a robin:thumbup:
You have a few to go to get a fleet
choneofakind October 4th, 2013, 02:02 PM All that love for the ZX14 and you can't even get proper rubber for the ninjette and replace the headlight??? that tharrrr ninjette looks like a pirate. yarrrr!!
saxnbass October 4th, 2013, 04:40 PM Fleet - A group of two or more vehicles owned or leased by a business or agency, rather than an individual or family.
caps October 5th, 2013, 05:55 AM All that love for the ZX14 and you can't even get proper rubber for the ninjette and replace the headlight??? that tharrrr ninjette looks like a pirate. yarrrr!!
Meh. Priorities. The Duc and the 14 get a ton if work and the ninjette and R6 are mostly for when people come over who don't have a bike and want to ride.
Fleet - A group of two or more vehicles owned or leased by a business or agency, rather than an individual or family.
Meh again.
caps October 20th, 2013, 06:52 PM So a little update I took the 14 to the AIM Expo :-) And as it ends up Robecon and I found out that Cycle World was sponsoring a Dyno shootout!
https://scontent-b-atl.xx.fbcdn.net/hphotos-prn2/q82/s720x720/1375861_459365974179967_552582381_n.jpg
So... for a $20 donation a person we couldn't say no!
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/q71/s720x720/1378306_10152281613484196_173572765_n.jpg
https://scontent-a-atl.xx.fbcdn.net/hphotos-prn2/q71/s720x720/1379478_10152281613539196_1071533580_n.jpg
https://scontent-a-atl.xx.fbcdn.net/hphotos-ash3/q71/s720x720/7996_10152281613614196_167553026_n.jpg
4wIZzaP7z1I
I put up the highest numbers for any sportbike so I may be in cycle world magazine, and I got some free swag :-)
And for results;
CNQxkDdGiwI
JohnnyBravo October 20th, 2013, 07:52 PM Congrats... Do ya cycle world thing and keep puttin down big numbers :thumbup:
caps October 21st, 2013, 04:57 PM Thanks bud
caps October 21st, 2013, 05:02 PM http://img.tapatalk.com/d/13/10/21/zusupeva.jpg
Or roughly 6.3 ninjettes
ninjamunky85 October 21st, 2013, 06:12 PM Pretty sweet, but isn't that like stock s1000rr numbers. I expected the zx-14 to top 200hp easily.
Jono October 21st, 2013, 07:02 PM Pretty sweet, but isn't that like stock s1000rr numbers. I expected the zx-14 to top 200hp easily.
I think the older ZX14s made quite a bit less HP than the newer ZX14s. Which is what you are thinking of. I think.
ninjamunky85 October 21st, 2013, 07:51 PM Yeah you're probably right, but still had the "highest numbers for any sportbike" that day. What was the competition?
caps October 22nd, 2013, 09:21 AM Yeah you're probably right, but still had the "highest numbers for any sportbike" that day. What was the competition?
A ton of liter bikes, and a few big boys (busas, 14s, and an s1K)
caps October 22nd, 2013, 09:23 AM I think the older ZX14s made quite a bit less HP than the newer ZX14s. Which is what you are thinking of. I think.
Yup. The old ones were 200 at the crank the new ones are 200 at the wheel.
caps October 22nd, 2013, 09:28 AM Pretty sweet, but isn't that like stock s1000rr numbers. I expected the zx-14 to top 200hp easily.
It's a 7 year old bike with 27K miles, I'm not sure what you were expecting.
I also think your a bit misinformed about what the ZX-14 is. It's not the step above the ZX-10, it's a machine that was built to keep up with a liter bike when 2-up. Which it still does 7 years later.
The big bikes are known for their arm ripping torque. At 5K rpms they make more torque than most bikes on the market regardless of make/model/size/style.
choneofakind October 22nd, 2013, 10:46 AM One more example of why big fat-ass midrange torque is more useful, usable, and fun than pure top end peak power. (take that CBR250R haters and peak-hp gospel boys)
Can you tell me it bugs me when people base their opinion of a bike on nothing but the peak power output number? :) I ride a bike with 30 hp (maybe) for goodness sake. But the mid-range is smooth and pulls right through rpm's that are useful on my bike.
ninjamunky85 October 22nd, 2013, 01:51 PM It's a 7 year old bike with 27K miles, I'm not sure what you were expecting.
I also think your a bit misinformed about what the ZX-14 is. It's not the step above the ZX-10, it's a machine that was built to keep up with a liter bike when 2-up. Which it still does 7 years later.
The big bikes are known for their arm ripping torque. At 5K rpms they make more torque than most bikes on the market regardless of make/model/size/style.
Not trying to criticize, your one bike makes more hp than all my bikes combined, just thought the 14 was capable of more.
And yeah it's not a bike that's designed to compete with a liter bike, but it was designed to compete directly with the 'busa. Which was the fastest production bike at one time I do believe.
ninjamunky85 October 22nd, 2013, 01:53 PM One more example of why big fat-ass midrange torque is more useful, usable, and fun than pure top end peak power. (take that CBR250R haters and peak-hp gospel boys)
Can you tell me it bugs me when people base their opinion of a bike on nothing but the peak power output number? :) I ride a bike with 30 hp (maybe) for goodness sake. But the mid-range is smooth and pulls right through rpm's that are useful on my bike.
Only reason I would have a bike like the zx-14 is so I could brag about my dyno numbers and quarter mile times. So in this case, at least to me, it is all about hp.
Sinister October 22nd, 2013, 02:18 PM Comparing results from one dyno to another isn't very helpful. One might show 175 another might show 188 and another might show 160.
But the peak hp is completely irrelevant on a 14. It's shockingly comfortable, handles better than anyone would expect for a big bike (on a track you won't out-corner supersports but on the street it's more than capable) and the torque.. oh my the torque that only comes from displacement (or forced induction). Ride one and you'll see.
You can keep your peak hp at 13k+ rpm's, i'll take my 50% more torque through most of the rev range.
KawiKid860 November 10th, 2013, 05:22 PM It's shockingly comfortable, handles better than anyone would expect for a big bike (on a track you won't out-corner supersports but on the street it's more than capable)
I can attest to this... There was an older guy on a 14 at my last track day, I was slightly quicker than him but he didn't have a problem keeping fairly close behind me. On my last session I could barely pass him in the corners and there was no way I could pass that beast in the straights so I just backed off and stayed behind him for that session and it wasn't a problem at all.
JohnnyBravo November 10th, 2013, 05:40 PM Hip hip
caps March 23rd, 2014, 06:43 AM I brought you guys a little something...
http://youtu.be/7t_QPDGVtms
KawiKid860 March 27th, 2014, 02:05 PM That looks terrifying. I want to try it
caps March 27th, 2014, 04:39 PM That looks terrifying. I want to try it
Lol, that pretty much explains the 14. And if you notice that was only till 5th gear.
caps April 9th, 2014, 01:11 PM I went to the Phil Serletic Fundraiser and they liked my bike
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/t1.0-9/q71/s720x720/10001504_10152717840219196_1758494327_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/t1.0-9/p180x540/397541_10152717039549196_1040124127_n.jpg
|
|