Go Back > Blogs > Ghostt

Rate this Entry

Extra Heavy Bar Ends

Posted November 16th, 2014 at 09:30 PM by Ghostt
Updated August 6th, 2015 at 08:53 PM by Ghostt

Okay we all know the bars vibrate on this bike like crazy. Let's face it, the OEM ones are a bit small.

So I ordered a pair of SCHOOLIE's extra heavy bar ends. He makes them to order depending on what length and weight you want. I picked the 3" long, and weighing in at 23 oz!!, o did I mention they are solid stainless steel too.

From Schoolie's post @,
I'm currently taking orders for these. Once you confirm your orders, I'll put them in the queue and work on them in the order I receive them. When I've got them made, I'll send a message requesting payment. I'll ship them out when I get the money.

I can make them to whatever length you like. Pricing for standard bar ends to length will be as shown in the following table. For anything other than that (bar end mirror grooves, etc.) we can discuss pricing before I get started.

Material Diameter Length Weight (Including bolt) Price
303 Stainless 1.5" 3" 23 oz $45
303 Stainless 1.5" 2.5" 19 oz $40
303 Stainless 1.5" 2" 15 oz $40
303 Stainless 1.5" 1.5" 11 oz $35
12L14 Mild Steel 1.5" 3" 23 oz $42
12L14 Mild Steel 1.5" 2.5" 19 oz $37
12L14 Mild Steel 1.5" 2" 15 oz $37
12L14 Mild Steel 1.5" 1.5" 11 oz $32

Don't buy the 12L14 unless you plan on painting or coating, they will rust if left bare. This just takes a few bucks off if you don't need stainless's rust resistance.

Shipping will be USPS Priority Flat rate of $5.80 for shipments inside the continental US. Contact me for a quote on international shipping.

I'll do my best to get these done as quickly as I can once you ask for them, but please understand that I'm fitting this in in my spare time. I'm trying to give you guys a good deal, please don't buy from me if that doesn't work for you.

These not only reduced the vibrations, but they look amazing as well, and also help in drop protection I'm told.

These are a direct swap out, the only hard part is the removal of the OEM ones, due to Kawasaki put red Loctite on those bolts.,39410.0.html
Attached Images
File Type: jpg 6017579187065682114.jpg (102.5 KB, 138 views)
File Type: jpg 6017579231641259634.jpg (89.9 KB, 351 views)
File Type: jpg 6051503617270684658.jpg (234.8 KB, 4 views)
File Type: jpg 6061256605968245170.jpg (195.9 KB, 143 views)
Posted in Modifications
Views 10436 Comments 2
Total Comments 2


  1. Old Comment
    HoneyBadgerRy's Avatar
    Maybe its because I'm so used to single cylinder bikes, and bikes like the hypermotard, but I replaced my bars with clip-ons that weigh like half as much as the stock bars, stick farther out, and don't have any bar weight, and I can't feel any vibration.
    Posted December 16th, 2015 at 09:44 AM by HoneyBadgerRy HoneyBadgerRy is offline

  2. Old Comment
    JohnnyBravo's Avatar
    That's freaking cool!
    Posted August 19th, 2016 at 10:24 AM by JohnnyBravo JohnnyBravo is offline

Motorcycle Safety Foundation

All times are GMT -7. The time now is 04:10 PM.

Website uptime monitoring
Powered by vBulletin®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2022, All rights reserved.