|
Posted February 1st, 2012 at 10:44 AM by Scattcatt
Updated May 29th, 2012 at 04:08 PM by Scattcatt
Everything in green pertains to the original hardware, scroll down to the normal text to get to the new and improved kit. Note that the calibrations can still be used for both versions of the kit
Figured I'd keep from blowing the EFI Group Buy thread up and just post my calibrations that I've tried here so those who wish to try my calibrations out for themselves can do so.
The program used is ProCAL. I'm using .cal file distributed on 02/02/2012
My performance modifications to the bike:
1) Full carbon fiber Yoshimura exhaust
2) Ecotrons EFI throttlebody installed upside down with no further modifications
3) K&N dual pod air filters
4) Removed snorkel
As of the latest updated version of this blog, I have not installed the O2 sensors or even welded the bungs to my headers.
Keep in mind that every bike may behave differently, even under the same circumstances. Different modifications...
|
ninjette.org sage
|
|
Views 11601
Comments 5
|