ninjette.org

Go Back   ninjette.org > Search Forums

Notices

Showing results 1 to 25 of 476
Search took 0.01 seconds.
Search: Posts Made By: Mohawk
Forum: Ninjettes At Speed February 19th, 2024, 02:44 PM
Replies: 11
Views: 3,716
Posted By Mohawk
So for racing use unsealed chain for minimum...

So for racing use unsealed chain for minimum losses. For the road use an X-ring chain. No real benefit on the road to a race chain or smaller than stock size, it will just wear quicker.
Quality...
Forum: General Motorcycling Discussion February 17th, 2024, 12:24 PM
Replies: 2
Views: 1,319
Posted By Mohawk
The problem with MotoGP's lack of rider testing...

The problem with MotoGP's lack of rider testing means it's much harder to get the bike adjusted to suit the rider. Whilst Marquez is a talented rider he has never been a development rider. Look what...
Forum: 1986 - 2007 Ninja 250R Tech Talk February 17th, 2024, 12:12 PM
Replies: 31
Views: 5,348
Posted By Mohawk
Theres not really much difference as the ZZR came...

Theres not really much difference as the ZZR came with a 17" wheels. That said the KR1-S forks & swingarm moved both wheels backward relative to the frame. That definitely improved the turn in, this...
Forum: 1986 - 2007 Ninja 250R Tech Talk February 13th, 2024, 02:22 AM
Replies: 31
Views: 5,348
Posted By Mohawk
I switched to KR-1S front end on my ZZR so run a...

I switched to KR-1S front end on my ZZR so run a 17" wheel now.
Forum: Riding Skills February 13th, 2024, 01:59 AM
Replies: 5
Views: 1,209
Posted By Mohawk
Book yourself into a race school & learn to ride...

Book yourself into a race school & learn to ride properly. Like everything in life some people have a feel for it, some don't. As mentioned above trying to hang on to faster riders will result in a...
Forum: 2013 - 2017 Ninja 300 Tech Talk February 11th, 2024, 02:16 PM
Replies: 6
Views: 2,032
Posted By Mohawk
I can understand if it wad a remote reflash....

I can understand if it wad a remote reflash. Can't you find a local place to do it ?
If you have an AFR meter just work from that, I did that on one of my other bikes, just made mental note when...
Forum: 2013 - 2017 Ninja 300 Tech Talk February 11th, 2024, 01:31 PM
Replies: 6
Views: 2,032
Posted By Mohawk
I thought you were just worried about running the...

I thought you were just worried about running the engine before dyno tuning & I was referring to the manual dials on the FC. If you have an external AFR meter then just ride it & adjust as you go.
...
Forum: 2013 - 2017 Ninja 300 Tech Talk February 11th, 2024, 09:29 AM
Replies: 6
Views: 2,032
Posted By Mohawk
To get the % increase for the extra air volume,...

To get the % increase for the extra air volume, you need to know the current duty cycle for the injectors. The FC has manual adjust settings, just add 10% at all 3 areas & take it from there. Note...
Forum: 1986 - 2007 Ninja 250R Tech Talk January 6th, 2024, 04:35 PM
Replies: 10
Views: 818
Posted By Mohawk
You can't adjust it out. It's not an adjustable...

You can't adjust it out. It's not an adjustable thing, it's a design thing, as in poor/cheap pic one or both.
Forum: 1986 - 2007 Ninja 250R Tech Talk January 2nd, 2024, 03:42 PM
Replies: 10
Views: 818
Posted By Mohawk
That knocking is the knackered clutch plastic...

That knocking is the knackered clutch plastic bushings. I know it well if you search on here you should find a post from me from a few years ago, where I replaced my clutch with one from a 2008-2012...
Forum: 1986 - 2007 Ninja 250R Farkles December 29th, 2023, 05:26 AM
Replies: 215
Views: 42,342
Posted By Mohawk
Looking good, but you need to rethink that rear...

Looking good, but you need to rethink that rear under tray unless you plan on zero rear suspension movement.
Forum: 2013 - 2017 Ninja 300 Tech Talk December 27th, 2023, 05:49 AM
Replies: 4
Views: 869
Posted By Mohawk
I think you have a poor understanding of engine...

I think you have a poor understanding of engine manufacturing. It is NOT 100% accurate, hence things like valve clearances have to be set for every valve. The engine does not need to run. They are...
Forum: 2013 - 2017 Ninja 300 Tech Talk December 23rd, 2023, 05:55 AM
Replies: 4
Views: 869
Posted By Mohawk
You need to use a micrometer to measure the shim...

You need to use a micrometer to measure the shim thickness. They are all different at the factory just like you they measure the clearance & adjust to the correct gap when new. As it wears in then...
Forum: 1986 - 2007 Ninja 250R Tech Talk December 8th, 2023, 11:57 AM
Replies: 2
Views: 6,093
Posted By Mohawk
Just go to gearing commander & plug in your...

Just go to gearing commander & plug in your numbers. My guess is you find stock gearing to low, but do you rev the bike ? I've seen so many people on various forums who want to ride with Harley revs...
Forum: 2013 - 2017 Ninja 300 Tech Talk November 29th, 2023, 11:56 AM
Replies: 5
Views: 3,487
Posted By Mohawk
Good work but why not just put a cooler on the...

Good work but why not just put a cooler on the head lube hose ? I did that on my ZZR250 �� Much simpler to plumb in.
Forum: 2008 - 2012 Ninja 250R Tech Talk October 28th, 2023, 08:20 AM
Replies: 1
Views: 417
Posted By Mohawk
I believe from reading this thread that Fi code...

I believe from reading this thread that Fi code 62 is a problem with the secondary throttle plate actuators.

https://www.kawasakiworld.com/threads/diagnostic-code-62-subthrottle.46411/
Forum: 1986 - 2007 Ninja 250R Tech Talk October 25th, 2023, 02:32 PM
Replies: 1
Views: 421
Posted By Mohawk
If its a 2007 pre-gen then its a known fault that...

If its a 2007 pre-gen then its a known fault that the clutch dampers get brittle then break up. Then the clutch gets noisy & it sounds like bad big end bearings. I replaced the complete clutch on...
Forum: 2013 - 2017 Ninja 300 Tech Talk October 24th, 2023, 02:59 PM
Replies: 2
Views: 409
Posted By Mohawk
It should slot in on the rear mounts & mate to...

It should slot in on the rear mounts & mate to the top mounts with a small modification or you can get the 300 top mounts & bolt them straight in. I'm working on the same for my ZZR250 to become a...
Forum: 2013 - 2017 Ninja 300 Tech Talk August 25th, 2023, 03:54 AM
Replies: 5
Views: 899
Posted By Mohawk
Yeah best bet for a 300 race bike big bore is the...

Yeah best bet for a 300 race bike big bore is the ZX6R pistons. Plenty of cheap second hand ones around &/or new from Kawasaki dealers. Thing to watch out for is I believe they changed the pin...
Forum: 2013 - 2017 Ninja 300 Tech Talk August 24th, 2023, 04:01 AM
Replies: 5
Views: 899
Posted By Mohawk
Stock 300 62mm complete (piston/ping/rings) is...

Stock 300 62mm complete (piston/ping/rings) is 157grams.
Wiseco 64mm complete is 198grams. So much for forged being stronger !
Wiseco 64mm with ZZR600 pin complete is 186grams.
ZZR600 64mm stock...
Forum: 2008 - 2012 Ninja 250R Tech Talk August 9th, 2023, 09:59 AM
Replies: 1
Views: 561
Posted By Mohawk
YSS are probably your best bet for maximum...

YSS are probably your best bet for maximum performance for minimum cost. They will supply sprung to suit your weight & intended use !
Forum: 1986 - 2007 Ninja 250R Tech Talk July 12th, 2023, 02:42 PM
Replies: 47
Views: 2,054
Posted By Mohawk
When you did compression test you did it with the...

When you did compression test you did it with the throttle wide open right ? If not you get really low reading. I assume you checked airbox to ensure no blockages there too.
I had similar symptoms...
Forum: New Members June 2nd, 2023, 12:35 PM
Replies: 8
Views: 590
Posted By Mohawk
Welcome fellow UK Ninjette rider. Good to see...

Welcome fellow UK Ninjette rider. Good to see another rescued from the brink.
Forum: General Motorcycling Discussion March 27th, 2023, 03:22 PM
Replies: 57
Views: 2,698
Posted By Mohawk
You don't need a ladder. I recall in France in...

You don't need a ladder. I recall in France in the early 80's when Dakar ravers were a thing, seeing French midgets (shorter than me anyways) pop key in ignition, walk round to right side, jump on a...
Forum: 2008 - 2012 Ninja 250R Tech Talk January 31st, 2023, 02:21 PM
Replies: 7
Views: 1,228
Posted By Mohawk
So the world went mad & many people got furlough...

So the world went mad & many people got furlough & did their bike projects. Unfortunately I had Covid badly right at the start & then had to work right through. So everything got parked. So finally...
Showing results 1 to 25 of 476

 
Forum Jump




Motorcycle Safety Foundation

All times are GMT -7. The time now is 11:17 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.