ninjette.org

Go Back   ninjette.org > Search Forums
Reload this Page Search Results
Portal Page Forums NinjetteWiki Blogs Register FAQ Today's Posts Search

Showing results 1 to 23 of 23
Search took 0.00 seconds. Search: Posts Made By: NinjaFinally
Forum: 1986 - 2007 Ninja 250R Tech Talk February 24th, 2023, 05:16 PM
Replies: 2
Views: 432
Posted By NinjaFinally
Talking Thanks InvisiBill, it was the connectors on the...

Thanks InvisiBill, it was the connectors on the black wires running from the right switch gear and the lugs on the brake micro switch being corroded. I cleaned them up and tightened the spade lugs a...
Forum: 1986 - 2007 Ninja 250R Tech Talk February 24th, 2023, 03:29 AM
Replies: 2
Views: 432
Posted By NinjaFinally
Installed braided lines, now my front brake light does not work

I installed the front line yesterday, and am pretty sure that after I checked it and the light was working. Took it for a test ride, good.

Installed the rear line today, had the right side cover...
Forum: 1986 - 2007 Ninja 250R Tech Talk May 20th, 2022, 09:49 PM
Replies: 2
Views: 341
Posted By NinjaFinally
Thanks for the heads up. I found it in my history...

Thanks for the heads up. I found it in my history at https://faq.ninja250.org/wiki/Ninja250_Howto
Forum: 1986 - 2007 Ninja 250R Tech Talk May 20th, 2022, 03:09 AM
Replies: 2
Views: 341
Posted By NinjaFinally
Is the wiki broken? I shut down the tab I had to the wiki and now all I get ...

is a blank index page? Is there a URL? Thanks
Forum: 1986 - 2007 Ninja 250R Tech Talk May 18th, 2022, 03:35 AM
Replies: 1
Views: 363
Posted By NinjaFinally
What exactly does the oil level window show - apart from oil level?

I see when my bike is running that liquid seems to dribble in from upper through a slot. Is this showing oil return through the clutch? It also seems to be more vigorous as the oil warms up.
Forum: 1986 - 2007 Ninja 250R Tech Talk May 17th, 2022, 04:52 AM
Replies: 0
Views: 329
Posted By NinjaFinally
Important oil filter info for Aussie Ninja Owners

I recently did an oil and filter change, using one of the Supercheap Auto's "Race Performance" RP401 filters. It seemed ok at the start, and then I found that it was taking longer for the oil...
Forum: 1986 - 2007 Ninja 250R Tech Talk May 2nd, 2022, 02:53 AM
Replies: 10
Views: 1,040
Posted By NinjaFinally
I finally did the valve clearance on my 06 Ninja

They were tight all round, measuring less than 2.5 thou on all valves except cylinder 1 exhaust 2, which was a loose 6.
I set them to 6 on exhaust and 5 on inlet. The 9mm deep socket as recommended...
Forum: 1986 - 2007 Ninja 250R Tech Talk April 24th, 2022, 03:23 AM
Replies: 7
Views: 524
Posted By NinjaFinally
The plugs are of unknown vintage, it has 26K on...

The plugs are of unknown vintage, it has 26K on it and I bought it 1k ago.
Forum: 1986 - 2007 Ninja 250R Tech Talk April 23rd, 2022, 09:16 PM
Replies: 18
Views: 909
Posted By NinjaFinally
Thanks for the great link.

Thanks for the great link.
Forum: 1986 - 2007 Ninja 250R Tech Talk April 23rd, 2022, 03:55 AM
Replies: 18
Views: 909
Posted By NinjaFinally
The way that it is slow to accelerate from idle...

The way that it is slow to accelerate from idle is a sign of the idle mixture being lean. That would mean cleaning the jets (and rest of carb).
Forum: 1986 - 2007 Ninja 250R Tech Talk April 23rd, 2022, 03:29 AM
Replies: 18
Views: 909
Posted By NinjaFinally
Hi DannoXYZ, The Red Line SI-1 (on ebay)...

Hi DannoXYZ,

The Red Line SI-1 (on ebay) claims to have a dosage of "Dosage: 1 (443ml) bottle treats 100 Gallons (378.54 Litres) of petrol".

So does this bottle will treat our 5 gallon tank...
Forum: 1986 - 2007 Ninja 250R Tech Talk April 23rd, 2022, 01:12 AM
Replies: 7
Views: 524
Posted By NinjaFinally
I just changed the plugs on my 06 Ninja. Comments?

I had the tank off to clean and reconnect the pass wire that never made a good connection after I changed the LH switch block. Then I saw that I could get at the plugs, and the previous owner had...
Forum: 1986 - 2007 Ninja 250R Tech Talk March 22nd, 2022, 03:40 AM
Replies: 7
Views: 618
Posted By NinjaFinally
So, I have my new oiled filter element installed...

So, I have my new oiled filter element installed and the bike is running well. Had to adjust the idle up a bit.

My question: What holds the lid of the airbox down? There is a strap thing that goes...
Forum: 1986 - 2007 Ninja 250R Tech Talk March 15th, 2022, 06:41 AM
Replies: 7
Views: 618
Posted By NinjaFinally
Excellent, I will get one ordered right away....

Excellent, I will get one ordered right away. Thanks
Forum: 1986 - 2007 Ninja 250R Tech Talk March 15th, 2022, 06:19 AM
Replies: 8
Views: 552
Posted By NinjaFinally
Some photos, let me know if you need more.

Some photos, let me know if you need more.
Forum: 1986 - 2007 Ninja 250R Tech Talk March 15th, 2022, 06:09 AM
Replies: 7
Views: 618
Posted By NinjaFinally
Which air cleaner element to get for 2006 EX250F?

I have my tank off as I am replacing the LH switch block (horn and pass button dead). Whilst I was there, I decided to inspect the air filter. It is all rotted out and has degenerated into clumps of...
Forum: 1986 - 2007 Ninja 250R Tech Talk March 12th, 2022, 02:34 AM
Replies: 2
Views: 426
Posted By NinjaFinally
OK thanks. I am planning a chain and sprockets...

OK thanks. I am planning a chain and sprockets change in the future and will fix it then.
Forum: 1986 - 2007 Ninja 250R Tech Talk March 7th, 2022, 12:16 AM
Replies: 2
Views: 544
Posted By NinjaFinally
I manufactured a washer from a piece of aluminum...

I manufactured a washer from a piece of aluminum can and placed that between the outer washer and the head of the allen bolt. That got rid of 3/4 of the play. I tried a second washer but then it was...
Forum: 1986 - 2007 Ninja 250R Tech Talk March 6th, 2022, 06:01 PM
Replies: 2
Views: 544
Posted By NinjaFinally
Do the gear change levers wear out?

My gear change lever has a fair bit of side to side play, and also a smaller amount of up and down play. This is while holding the linkage under the lever still. I see that the lever has a bearing...
Forum: 1986 - 2007 Ninja 250R Tech Talk March 4th, 2022, 11:37 PM
Replies: 2
Views: 426
Posted By NinjaFinally
My front sprocket seemed to have had rubber dampers?

While I was fixing my neutral wire, I noticed that the sprocket does not look like in the wiki. At the bottom just left of the bolt is a piece of green rubbery stuff. It looks like there should be 6...
Forum: 1986 - 2007 Ninja 250R Tech Talk March 4th, 2022, 11:21 PM
Replies: 5
Views: 552
Posted By NinjaFinally
Thanks all, my neutral wire is now fixed. I...

Thanks all, my neutral wire is now fixed. I cleaned up inside the chain cover as well, it took some gentle persuasion to remove.
Forum: 1986 - 2007 Ninja 250R Tech Talk February 26th, 2022, 11:32 PM
Replies: 5
Views: 552
Posted By NinjaFinally
Thanks. So I will have to take the side cover off...

Thanks. So I will have to take the side cover off to get at the switch?
Forum: 1986 - 2007 Ninja 250R Tech Talk February 25th, 2022, 11:48 PM
Replies: 5
Views: 552
Posted By NinjaFinally
Sorting out issues on my '06

Hello all, I am new here after buying a 2006 gpx250r, Australian version. I have been using the wiki which is an excellent resource, but of course it does not cover everything.

Some gremlins I...
Showing results 1 to 23 of 23

 
Forum Jump




Motorcycle Safety Foundation

All times are GMT -7. The time now is 10:51 PM.

Contact Us - ninjette.org - Archive - Terms of Service - Top

Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.