ninjette.org - Search Results

		ninjette.org > Search Forums
Search Results

Showing results 1 to 10 of 10
Search took 0.00 seconds. Search: Posts Made By: Haynix

Forum: 1986 - 2007 Ninja 250R Tech Talk

April 17th, 2019, 12:41 PM

Replies: 21

Right-Hand Cylinder not firing

Views: 2,611

Posted By Haynix

Update

6 month update

Bike has been running great since new battery and a "stage 2" jet kit with 110's and 40's. Was definitely running lean with the stock jets and K&N filter. All good!

Forum: 1986 - 2007 Ninja 250R Tech Talk

October 30th, 2018, 01:44 PM

Replies: 21

Right-Hand Cylinder not firing

Views: 2,611

Posted By Haynix

Fixed.

Seems like the battery was the culprit. I kept the battery topped off at all times with a trickle charger and didn't have any more problems. Replaced the battery and still haven't had any problems....

Forum: 1986 - 2007 Ninja 250R Tech Talk

October 23rd, 2018, 07:48 AM

Replies: 21

Right-Hand Cylinder not firing

Views: 2,611

Posted By Haynix

Probably a voltage issue

TL;DR - I think the problem is electrical.

I had another incident yesterday. Was low-ish on gas and carb started overflowing about 10 minutes into ride. One of the floats was probably stuck. ...

Forum: 1986 - 2007 Ninja 250R Tech Talk

October 10th, 2018, 09:15 AM

Replies: 21

Right-Hand Cylinder not firing

Views: 2,611

Posted By Haynix

Fixed (I think)

TL;DR - I think its fixed now but some minor symptoms remain. Sprained my ankle so I will be out for a couple weeks. Any reason not to buy a Li-Ion battery?

I think it's fixed. disassembled...

Forum: 1986 - 2007 Ninja 250R Tech Talk

October 8th, 2018, 08:13 AM

Replies: 21

Right-Hand Cylinder not firing

Views: 2,611

Posted By Haynix

I found an air leak somewhere with the Starting...

I found an air leak somewhere with the Starting Fluid test on the carb boots. I'll take carbs off again and do a more thorough check for air leaks and grab a good battery from my roommate's bike.
...

Forum: 1986 - 2007 Ninja 250R Tech Talk

October 5th, 2018, 02:36 PM

Replies: 21

Right-Hand Cylinder not firing

Views: 2,611

Posted By Haynix

It's idling at about 2500 rpm. It will...

It's idling at about 2500 rpm.

It will only start with a jump. If I just use battery the fuse box will buzz. That's normal right? Just a dead battery?

Is there a possibility of...

Forum: 1986 - 2007 Ninja 250R Tech Talk

October 5th, 2018, 10:02 AM

Replies: 21

Right-Hand Cylinder not firing

Views: 2,611

Posted By Haynix

@greg no I haven't looked at top end. I don't...

@greg no I haven't looked at top end. I don't have maintenance history on bike either. I'm kindof thinking the problem could be in there. In which case I'm just gonna take it to a shop. I don't...

Forum: 1986 - 2007 Ninja 250R Tech Talk

October 5th, 2018, 09:14 AM

Replies: 21

Right-Hand Cylinder not firing

Views: 2,611

Posted By Haynix

Tested spark, it's fine. Pulled carb,...

Tested spark, it's fine.

Pulled carb, cleaned with carb cleaner, reset mixture screws to 2.5 turns, verified ~17mm float heights, verified diaphragms in good shape, reassembled. There was a small...

Forum: 1986 - 2007 Ninja 250R Tech Talk

September 27th, 2018, 02:22 PM

Replies: 21

Right-Hand Cylinder not firing

Views: 2,611

Posted By Haynix

Right-Hand Cylinder not firing

Seemingly at random my right-hand cylinder will go into a phase of either not firing or flooding. It will struggle to get past 5k RPM, and when idling it will very slowly die. The right exhaust...

Forum: 1986 - 2007 Ninja 250R Farkles

July 10th, 2018, 08:47 AM

Replies: 10

Removing Tribal Decal Adhesive?

Views: 6,392

Posted By Haynix

Removing Tribal Decal Adhesive?

TL;DR how to remove leftover adhesive from tribal decals?

Hello ninjas and ninjettes. New member in Durham NC. Just purchased a clean 2007 Ninja 250 for my very first bike. I will post in the...

Showing results 1 to 10 of 10

Forum Jump

All times are GMT -7. The time now is 12:12 AM.