ninjette.org - View Single Post

akexel · April 16th, 2015, 07:14 AM

Sorry for being away but I work 3rd shift 6 days a week and I have 3 kids to chase after! After messing around a bit it seems that at 2 1/2 turns on the pilot I can get it to idle but the slides are bouncing up and down at idle and all over the place when I try to rev it at all, but when I blocked the crescent opening to the diaphragm chamber I got it to smooth out and operate normally. I also only got it to do it once...I'm thinking I have a vacuum issue somewhere..

April 16th, 2015, 07:14 AM	#27
akexel ninjette.org member Name: adam Location: Mequon wi Join Date: Apr 2015 Motorcycle(s): 1996 250 ninja, 1995 sportster Posts: 13	Update on ninja chop Sorry for being away but I work 3rd shift 6 days a week and I have 3 kids to chase after! After messing around a bit it seems that at 2 1/2 turns on the pilot I can get it to idle but the slides are bouncing up and down at idle and all over the place when I try to rev it at all, but when I blocked the crescent opening to the diaphragm chamber I got it to smooth out and operate normally. I also only got it to do it once...I'm thinking I have a vacuum issue somewhere..