Quote:
Originally Posted by Devita818
I had almost the same exact problem while doing my jetting kit. I hada yoshimura trc full exhaust, K&N, Clean air removal, etc.
So basically it boiled down to this I in all my research bought a stage2 and overlooked the fact that I needed a stage 3 jetting kit due to the filter and full exhaust I forget exactly what size jets I put in there and my problems were almost exactly as described bigger jets and pulling the carb off a few times to adjust screws solved it
|
I had a Keihin #112.5 and #110 in before (which is a 108 and 106 dyno I think). Which is significantly larger than I needed. However I still experienced the exact same issues.