Here is what I have to replace the old motor parts, mostly new...:
-crankshaft with rod (used)
-carbuertor
-ignition coil
-first gear clutch
-second gear clutch
-main bearings
-piston needle bearing
-piston, rings, clips
-oil seals
-set of gaskets
-reed valve
-intake manifold (used)
the cylinder can be re-used and is within spec after being cleaned and the cross-hatching pattern reapplied
I'm in now. go time tomorrow. have a feeling the flywheel might be toasted just like the can am I just took apart..
__________________________________________________
Instagram: @katie.baden
|