ninjette.org - View Single Post

corksil · June 30th, 2015, 11:05 PM

During a valve lash adjustment, is it possible to stack valve shims to attain required measurements?

Example ---- 1.75mm shim required to set proper lash. All 1.75mm shims used during previous un-related valve lash adjustment procedures.

1.00mm and 0.75mm shims remaining.

OKAY to stack 1.00mm and 0.75mm shim on top of each other under bucket to attain required height?

Thanks!

June 30th, 2015, 11:05 PM	#1
corksil ninjette.org certified postwhore Name: TC Location: Hawaii Join Date: Sep 2013 Motorcycle(s): A lot. Posts: A lot.	Stacking valve shims During a valve lash adjustment, is it possible to stack valve shims to attain required measurements? Example ---- 1.75mm shim required to set proper lash. All 1.75mm shims used during previous un-related valve lash adjustment procedures. 1.00mm and 0.75mm shims remaining. OKAY to stack 1.00mm and 0.75mm shim on top of each other under bucket to attain required height? Thanks! __________________________________________________ Just batshit crazy. All his posts are endless diatribes. Some are actually entertaining but mostly batshit crazy.