ninjette.org - View Single Post

kkim · November 23rd, 2008, 11:53 PM

sorry, no DIY, but after you take off the right bottom fairing, it's as simple as connecting a ground wire and replacing the present coolant temp sensor with the unit they provide. dress the wiring and you are done. if you want the gauge to light up, you do need to tap into a switched +12v source, but they give you a splice to do that, too.

Doubles as a clock, too.

November 23rd, 2008, 11:53 PM	#1
kkim Join Date: Nov 2008 Posts: Too much.	Daytona Water Temp Gauge sorry, no DIY, but after you take off the right bottom fairing, it's as simple as connecting a ground wire and replacing the present coolant temp sensor with the unit they provide. dress the wiring and you are done. if you want the gauge to light up, you do need to tap into a switched +12v source, but they give you a splice to do that, too. Doubles as a clock, too.