I've finally completed drilling all of my bolts for safety wiring! In the end I only broke about 6 or 7 bits of varying sizes. The drill press is the only way to do that chore.
I have drained the coolant and will need to flush out the system. I drained the oil and need to fix a small seeping leak. More oily grunge cleaning is in order and soon I'm pulling the wiring in order to check for faults and clean more of the bike. While I'm at all of this I'm going to lube all the various bearings and bushings. Some of which I discovered haven't been serviced since the bike was assembled in Japan. Recent pics are not so interesting so I'll just leave the post with a shot of how the bike sits now. More pics are at my blog (link in signature).
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions
|