Quote:
Originally Posted by Yamahawk
is possible to fit them into the 36mm EX250 forks from 88-07.
|
yes. You use EX250/300 springs in EX250/300 forks. The GSXR top-out springs and main springs are trash.
All 20mm cartridges have a tube of either 24mm or 25.4 and either way you have to gut the EX tube of the 'barrel' in the bottom. So all top-out functionality has to be internal to the cartridge. Andreani uses lengths of plastic rod and a fat O-ring, I use proper springs.
Quote:
Originally Posted by Yamahawk
I believe that Matt Patton uses the 01-03 GSXR600 cartridges, also, correct me if I am wrong, and that they are conventional forks not USD ones like I have.
|
Correct on both counts. the USD cartridge can be used too. It's just that the 01-03 is easy(er) to get ahold of. Send me your forks and the donor cartridge you have and I do what's necessary.