ninjette.org - View Single Post

jkv45 · January 4th, 2016, 07:05 AM

Thanks guys.

I'm looking forward to getting things back together. After I get the tires on and bearing in I'm planning to pull the swingarm. It has some tabs on it that I'm not using that I'll trim off, and plan to coat it charcoal with a satin clear.

The upper triple is being milled to open up the pockets on the underside. It was just a big slab of cast aluminum, and looked like it came off a Harley. I'll need to do some finishing when it comes back from the machine shop, then it will get coated in the same charcoal texture as the exhaust and brake bracket.

January 4th, 2016, 07:05 AM	#63
jkv45 Rev Limiter Name: Jay Location: WI Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot. MOTM - Jun '18, Oct '16	Thanks guys. I'm looking forward to getting things back together. After I get the tires on and bearing in I'm planning to pull the swingarm. It has some tabs on it that I'm not using that I'll trim off, and plan to coat it charcoal with a satin clear. The upper triple is being milled to open up the pockets on the underside. It was just a big slab of cast aluminum, and looked like it came off a Harley. I'll need to do some finishing when it comes back from the machine shop, then it will get coated in the same charcoal texture as the exhaust and brake bracket.