Quote:
Originally Posted by jkv45
That's usually a sign of a lean mixture, or the throttle cable/mechanism could be hanging up. A vacuum leak around the carb boots (where they connect to the engine) can cause that as well. Check the clamps to make sure they are all tight.
|
Okay guys I have Check for a vacuum leak around the carb boots and found nothing using starter fluid. they also look like their in good condition and on pretty firm .
I felt the throttle cables around the engine and they felt dry so they probably need lubing.
But would that really be the issue that causing this it seems miniscule.
Now that I eliminated those two factors what do yall think the issue is?
Notes :
when I give the bike throttle the rpms will sometimes delay coming up .
I have been adjusting the engine idle not the idle mixture screw but I think I'm going to check the settings of it